// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// 	protoc-gen-go v1.36.11
// 	protoc        v6.33.4
// source: meshtastic/portnums.proto

package pb

import (
	protoreflect "google.golang.org/protobuf/reflect/protoreflect"
	protoimpl "google.golang.org/protobuf/runtime/protoimpl"
	reflect "reflect"
	sync "sync"
	unsafe "unsafe"
)

const (
	// Verify that this generated code is sufficiently up-to-date.
	_ = protoimpl.EnforceVersion(20 - protoimpl.MinVersion)
	// Verify that runtime/protoimpl is sufficiently up-to-date.
	_ = protoimpl.EnforceVersion(protoimpl.MaxVersion - 20)
)

// For any new 'apps' that run on the device or via sister apps on phones/PCs they should pick and use a
// unique 'portnum' for their application.
// If you are making a new app using meshtastic, please send in a pull request to add your 'portnum' to this
// master table.
// PortNums should be assigned in the following range:
// 0-63   Core Meshtastic use, do not use for third party apps
// 64-127 Registered 3rd party apps, send in a pull request that adds a new entry to portnums.proto to  register your application
// 256-511 Use one of these portnums for your private applications that you don't want to register publically
// All other values are reserved.
// Note: This was formerly a Type enum named 'typ' with the same id #
// We have change to this 'portnum' based scheme for specifying app handlers for particular payloads.
// This change is backwards compatible by treating the legacy OPAQUE/CLEAR_TEXT values identically.
type PortNum int32

const (
	// Deprecated: do not use in new code (formerly called OPAQUE)
	// A message sent from a device outside of the mesh, in a form the mesh does not understand
	// NOTE: This must be 0, because it is documented in IMeshService.aidl to be so
	// ENCODING: binary undefined
	PortNum_UNKNOWN_APP PortNum = 0
	// A simple UTF-8 text message, which even the little micros in the mesh
	// can understand and show on their screen eventually in some circumstances
	// even signal might send messages in this form (see below)
	// ENCODING: UTF-8 Plaintext (?)
	PortNum_TEXT_MESSAGE_APP PortNum = 1
	// Reserved for built-in GPIO/example app.
	// See remote_hardware.proto/HardwareMessage for details on the message sent/received to this port number
	// ENCODING: Protobuf
	PortNum_REMOTE_HARDWARE_APP PortNum = 2
	// The built-in position messaging app.
	// Payload is a Position message.
	// ENCODING: Protobuf
	PortNum_POSITION_APP PortNum = 3
	// The built-in user info app.
	// Payload is a User message.
	// ENCODING: Protobuf
	PortNum_NODEINFO_APP PortNum = 4
	// Protocol control packets for mesh protocol use.
	// Payload is a Routing message.
	// ENCODING: Protobuf
	PortNum_ROUTING_APP PortNum = 5
	// Admin control packets.
	// Payload is a AdminMessage message.
	// ENCODING: Protobuf
	PortNum_ADMIN_APP PortNum = 6
	// Compressed TEXT_MESSAGE payloads.
	// ENCODING: UTF-8 Plaintext (?) with Unishox2 Compression
	// NOTE: The Device Firmware converts a TEXT_MESSAGE_APP to TEXT_MESSAGE_COMPRESSED_APP if the compressed
	// payload is shorter. There's no need for app developers to do this themselves. Also the firmware will decompress
	// any incoming TEXT_MESSAGE_COMPRESSED_APP payload and convert to TEXT_MESSAGE_APP.
	PortNum_TEXT_MESSAGE_COMPRESSED_APP PortNum = 7
	// Waypoint payloads.
	// Payload is a Waypoint message.
	// ENCODING: Protobuf
	PortNum_WAYPOINT_APP PortNum = 8
	// Audio Payloads.
	// Encapsulated codec2 packets. On 2.4 GHZ Bandwidths only for now
	// ENCODING: codec2 audio frames
	// NOTE: audio frames contain a 3 byte header (0xc0 0xde 0xc2) and a one byte marker for the decompressed bitrate.
	// This marker comes from the 'moduleConfig.audio.bitrate' enum minus one.
	PortNum_AUDIO_APP PortNum = 9
	// Same as Text Message but originating from Detection Sensor Module.
	// NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9
	PortNum_DETECTION_SENSOR_APP PortNum = 10
	// Same as Text Message but used for critical alerts.
	PortNum_ALERT_APP PortNum = 11
	// Module/port for handling key verification requests.
	PortNum_KEY_VERIFICATION_APP PortNum = 12
	// Provides a 'ping' service that replies to any packet it receives.
	// Also serves as a small example module.
	// ENCODING: ASCII Plaintext
	PortNum_REPLY_APP PortNum = 32
	// Used for the python IP tunnel feature
	// ENCODING: IP Packet. Handled by the python API, firmware ignores this one and pases on.
	PortNum_IP_TUNNEL_APP PortNum = 33
	// Paxcounter lib included in the firmware
	// ENCODING: protobuf
	PortNum_PAXCOUNTER_APP PortNum = 34
	// Store and Forward++ module included in the firmware
	// ENCODING: protobuf
	// This module is specifically for Native Linux nodes, and provides a Git-style
	// chain of messages.
	PortNum_STORE_FORWARD_PLUSPLUS_APP PortNum = 35
	// Node Status module
	// ENCODING: protobuf
	// This module allows setting an extra string of status for a node.
	// Broadcasts on change and on a timer, possibly once a day.
	PortNum_NODE_STATUS_APP PortNum = 36
	// Provides a hardware serial interface to send and receive from the Meshtastic network.
	// Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic
	// network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network.
	// Maximum packet size of 240 bytes.
	// Module is disabled by default can be turned on by setting SERIAL_MODULE_ENABLED = 1 in SerialPlugh.cpp.
	// ENCODING: binary undefined
	PortNum_SERIAL_APP PortNum = 64
	// STORE_FORWARD_APP (Work in Progress)
	// Maintained by Jm Casler (MC Hamster) : jm@casler.org
	// ENCODING: Protobuf
	PortNum_STORE_FORWARD_APP PortNum = 65
	// Optional port for messages for the range test module.
	// ENCODING: ASCII Plaintext
	// NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9
	PortNum_RANGE_TEST_APP PortNum = 66
	// Provides a format to send and receive telemetry data from the Meshtastic network.
	// Maintained by Charles Crossan (crossan007) : crossan007@gmail.com
	// ENCODING: Protobuf
	PortNum_TELEMETRY_APP PortNum = 67
	// Experimental tools for estimating node position without a GPS
	// Maintained by Github user a-f-G-U-C (a Meshtastic contributor)
	// Project files at https://github.com/a-f-G-U-C/Meshtastic-ZPS
	// ENCODING: arrays of int64 fields
	PortNum_ZPS_APP PortNum = 68
	// Used to let multiple instances of Linux native applications communicate
	// as if they did using their LoRa chip.
	// Maintained by GitHub user GUVWAF.
	// Project files at https://github.com/GUVWAF/Meshtasticator
	// ENCODING: Protobuf (?)
	PortNum_SIMULATOR_APP PortNum = 69
	// Provides a traceroute functionality to show the route a packet towards
	// a certain destination would take on the mesh. Contains a RouteDiscovery message as payload.
	// ENCODING: Protobuf
	PortNum_TRACEROUTE_APP PortNum = 70
	// Aggregates edge info for the network by sending out a list of each node's neighbors
	// ENCODING: Protobuf
	PortNum_NEIGHBORINFO_APP PortNum = 71
	// ATAK Plugin
	// Portnum for payloads from the official Meshtastic ATAK plugin
	PortNum_ATAK_PLUGIN PortNum = 72
	// Provides unencrypted information about a node for consumption by a map via MQTT
	PortNum_MAP_REPORT_APP PortNum = 73
	// PowerStress based monitoring support (for automated power consumption testing)
	PortNum_POWERSTRESS_APP PortNum = 74
	// LoraWAN Payload Transport
	// ENCODING: compact binary LoRaWAN uplink (10-byte RF metadata + PHY payload) - see LoRaWANBridgeModule
	PortNum_LORAWAN_BRIDGE PortNum = 75
	// Reticulum Network Stack Tunnel App
	// ENCODING: Fragmented RNS Packet. Handled by Meshtastic RNS interface
	PortNum_RETICULUM_TUNNEL_APP PortNum = 76
	// App for transporting Cayenne Low Power Payload, popular for LoRaWAN sensor nodes. Offers ability to send
	// arbitrary telemetry over meshtastic that is not covered by telemetry.proto
	// ENCODING: CayenneLLP
	PortNum_CAYENNE_APP PortNum = 77
	// Private applications should use portnums >= 256.
	// To simplify initial development and testing you can use "PRIVATE_APP"
	// in your code without needing to rebuild protobuf files (via [regen-protos.sh](https://github.com/meshtastic/firmware/blob/master/bin/regen-protos.sh))
	PortNum_PRIVATE_APP PortNum = 256
	// ATAK Forwarder Module https://github.com/paulmandal/atak-forwarder
	// ENCODING: libcotshrink
	PortNum_ATAK_FORWARDER PortNum = 257
	// Currently we limit port nums to no higher than this value
	PortNum_MAX PortNum = 511
)

// Enum value maps for PortNum.
var (
	PortNum_name = map[int32]string{
		0:   "UNKNOWN_APP",
		1:   "TEXT_MESSAGE_APP",
		2:   "REMOTE_HARDWARE_APP",
		3:   "POSITION_APP",
		4:   "NODEINFO_APP",
		5:   "ROUTING_APP",
		6:   "ADMIN_APP",
		7:   "TEXT_MESSAGE_COMPRESSED_APP",
		8:   "WAYPOINT_APP",
		9:   "AUDIO_APP",
		10:  "DETECTION_SENSOR_APP",
		11:  "ALERT_APP",
		12:  "KEY_VERIFICATION_APP",
		32:  "REPLY_APP",
		33:  "IP_TUNNEL_APP",
		34:  "PAXCOUNTER_APP",
		35:  "STORE_FORWARD_PLUSPLUS_APP",
		36:  "NODE_STATUS_APP",
		64:  "SERIAL_APP",
		65:  "STORE_FORWARD_APP",
		66:  "RANGE_TEST_APP",
		67:  "TELEMETRY_APP",
		68:  "ZPS_APP",
		69:  "SIMULATOR_APP",
		70:  "TRACEROUTE_APP",
		71:  "NEIGHBORINFO_APP",
		72:  "ATAK_PLUGIN",
		73:  "MAP_REPORT_APP",
		74:  "POWERSTRESS_APP",
		75:  "LORAWAN_BRIDGE",
		76:  "RETICULUM_TUNNEL_APP",
		77:  "CAYENNE_APP",
		256: "PRIVATE_APP",
		257: "ATAK_FORWARDER",
		511: "MAX",
	}
	PortNum_value = map[string]int32{
		"UNKNOWN_APP":                 0,
		"TEXT_MESSAGE_APP":            1,
		"REMOTE_HARDWARE_APP":         2,
		"POSITION_APP":                3,
		"NODEINFO_APP":                4,
		"ROUTING_APP":                 5,
		"ADMIN_APP":                   6,
		"TEXT_MESSAGE_COMPRESSED_APP": 7,
		"WAYPOINT_APP":                8,
		"AUDIO_APP":                   9,
		"DETECTION_SENSOR_APP":        10,
		"ALERT_APP":                   11,
		"KEY_VERIFICATION_APP":        12,
		"REPLY_APP":                   32,
		"IP_TUNNEL_APP":               33,
		"PAXCOUNTER_APP":              34,
		"STORE_FORWARD_PLUSPLUS_APP":  35,
		"NODE_STATUS_APP":             36,
		"SERIAL_APP":                  64,
		"STORE_FORWARD_APP":           65,
		"RANGE_TEST_APP":              66,
		"TELEMETRY_APP":               67,
		"ZPS_APP":                     68,
		"SIMULATOR_APP":               69,
		"TRACEROUTE_APP":              70,
		"NEIGHBORINFO_APP":            71,
		"ATAK_PLUGIN":                 72,
		"MAP_REPORT_APP":              73,
		"POWERSTRESS_APP":             74,
		"LORAWAN_BRIDGE":              75,
		"RETICULUM_TUNNEL_APP":        76,
		"CAYENNE_APP":                 77,
		"PRIVATE_APP":                 256,
		"ATAK_FORWARDER":              257,
		"MAX":                         511,
	}
)

func (x PortNum) Enum() *PortNum {
	p := new(PortNum)
	*p = x
	return p
}

func (x PortNum) String() string {
	return protoimpl.X.EnumStringOf(x.Descriptor(), protoreflect.EnumNumber(x))
}

func (PortNum) Descriptor() protoreflect.EnumDescriptor {
	return file_meshtastic_portnums_proto_enumTypes[0].Descriptor()
}

func (PortNum) Type() protoreflect.EnumType {
	return &file_meshtastic_portnums_proto_enumTypes[0]
}

func (x PortNum) Number() protoreflect.EnumNumber {
	return protoreflect.EnumNumber(x)
}

// Deprecated: Use PortNum.Descriptor instead.
func (PortNum) EnumDescriptor() ([]byte, []int) {
	return file_meshtastic_portnums_proto_rawDescGZIP(), []int{0}
}

var File_meshtastic_portnums_proto protoreflect.FileDescriptor

const file_meshtastic_portnums_proto_rawDesc = "" +
	"\n" +
	"\x19meshtastic/portnums.proto\x12\n" +
	"meshtastic*\xbf\x05\n" +
	"\aPortNum\x12\x0f\n" +
	"\vUNKNOWN_APP\x10\x00\x12\x14\n" +
	"\x10TEXT_MESSAGE_APP\x10\x01\x12\x17\n" +
	"\x13REMOTE_HARDWARE_APP\x10\x02\x12\x10\n" +
	"\fPOSITION_APP\x10\x03\x12\x10\n" +
	"\fNODEINFO_APP\x10\x04\x12\x0f\n" +
	"\vROUTING_APP\x10\x05\x12\r\n" +
	"\tADMIN_APP\x10\x06\x12\x1f\n" +
	"\x1bTEXT_MESSAGE_COMPRESSED_APP\x10\a\x12\x10\n" +
	"\fWAYPOINT_APP\x10\b\x12\r\n" +
	"\tAUDIO_APP\x10\t\x12\x18\n" +
	"\x14DETECTION_SENSOR_APP\x10\n" +
	"\x12\r\n" +
	"\tALERT_APP\x10\v\x12\x18\n" +
	"\x14KEY_VERIFICATION_APP\x10\f\x12\r\n" +
	"\tREPLY_APP\x10 \x12\x11\n" +
	"\rIP_TUNNEL_APP\x10!\x12\x12\n" +
	"\x0ePAXCOUNTER_APP\x10\"\x12\x1e\n" +
	"\x1aSTORE_FORWARD_PLUSPLUS_APP\x10#\x12\x13\n" +
	"\x0fNODE_STATUS_APP\x10$\x12\x0e\n" +
	"\n" +
	"SERIAL_APP\x10@\x12\x15\n" +
	"\x11STORE_FORWARD_APP\x10A\x12\x12\n" +
	"\x0eRANGE_TEST_APP\x10B\x12\x11\n" +
	"\rTELEMETRY_APP\x10C\x12\v\n" +
	"\aZPS_APP\x10D\x12\x11\n" +
	"\rSIMULATOR_APP\x10E\x12\x12\n" +
	"\x0eTRACEROUTE_APP\x10F\x12\x14\n" +
	"\x10NEIGHBORINFO_APP\x10G\x12\x0f\n" +
	"\vATAK_PLUGIN\x10H\x12\x12\n" +
	"\x0eMAP_REPORT_APP\x10I\x12\x13\n" +
	"\x0fPOWERSTRESS_APP\x10J\x12\x12\n" +
	"\x0eLORAWAN_BRIDGE\x10K\x12\x18\n" +
	"\x14RETICULUM_TUNNEL_APP\x10L\x12\x0f\n" +
	"\vCAYENNE_APP\x10M\x12\x10\n" +
	"\vPRIVATE_APP\x10\x80\x02\x12\x13\n" +
	"\x0eATAK_FORWARDER\x10\x81\x02\x12\b\n" +
	"\x03MAX\x10\xff\x03B^\n" +
	"\x14org.meshtastic.protoB\bPortnumsZ\"github.com/meshtastic/go/generated\xaa\x02\x14Meshtastic.Protobufs\xba\x02\x00b\x06proto3"

var (
	file_meshtastic_portnums_proto_rawDescOnce sync.Once
	file_meshtastic_portnums_proto_rawDescData []byte
)

func file_meshtastic_portnums_proto_rawDescGZIP() []byte {
	file_meshtastic_portnums_proto_rawDescOnce.Do(func() {
		file_meshtastic_portnums_proto_rawDescData = protoimpl.X.CompressGZIP(unsafe.Slice(unsafe.StringData(file_meshtastic_portnums_proto_rawDesc), len(file_meshtastic_portnums_proto_rawDesc)))
	})
	return file_meshtastic_portnums_proto_rawDescData
}

var file_meshtastic_portnums_proto_enumTypes = make([]protoimpl.EnumInfo, 1)
var file_meshtastic_portnums_proto_goTypes = []any{
	(PortNum)(0), // 0: meshtastic.PortNum
}
var file_meshtastic_portnums_proto_depIdxs = []int32{
	0, // [0:0] is the sub-list for method output_type
	0, // [0:0] is the sub-list for method input_type
	0, // [0:0] is the sub-list for extension type_name
	0, // [0:0] is the sub-list for extension extendee
	0, // [0:0] is the sub-list for field type_name
}

func init() { file_meshtastic_portnums_proto_init() }
func file_meshtastic_portnums_proto_init() {
	if File_meshtastic_portnums_proto != nil {
		return
	}
	type x struct{}
	out := protoimpl.TypeBuilder{
		File: protoimpl.DescBuilder{
			GoPackagePath: reflect.TypeOf(x{}).PkgPath(),
			RawDescriptor: unsafe.Slice(unsafe.StringData(file_meshtastic_portnums_proto_rawDesc), len(file_meshtastic_portnums_proto_rawDesc)),
			NumEnums:      1,
			NumMessages:   0,
			NumExtensions: 0,
			NumServices:   0,
		},
		GoTypes:           file_meshtastic_portnums_proto_goTypes,
		DependencyIndexes: file_meshtastic_portnums_proto_depIdxs,
		EnumInfos:         file_meshtastic_portnums_proto_enumTypes,
	}.Build()
	File_meshtastic_portnums_proto = out.File
	file_meshtastic_portnums_proto_goTypes = nil
	file_meshtastic_portnums_proto_depIdxs = nil
}