/*
 * SPDX-License-Identifier: Apache-2.0
 *
 * LilyGo T-Beam V1.1 — Device Tree Source (PROCPU)
 *
 * SoC:   ESP32-D0WD
 * Radio: SX1276 / SX1278 (LORA32 module)
 * Flash: 4 MB
 *
 * LoRa:  MOSI=27  MISO=19  SCK=5  NSS=18  RST=23  DIO0=26
 * UART0: TX=1 RX=3 (via CP2104 USB-serial)
 */

/dts-v1/;
#include <espressif/esp32/esp32_d0wd_v3.dtsi>
#include "lilygo_tbeam-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "LilyGo T-Beam V1.1 PROCPU";
	compatible = "lilygo,t-beam";

	chosen {
		zephyr,sram             = &sram0;
		zephyr,flash            = &flash0;
		zephyr,console          = &uart0;
		zephyr,shell-uart       = &uart0;
		zephyr,flash-controller = &flash;
	};

	aliases {
		lora0 = &lora;
	};

	buttons {
		compatible = "gpio-keys";
		boot_button: button_0 {
			gpios = <&gpio0 38 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Boot Button";
			zephyr,code = <INPUT_KEY_0>;
		};
	};
};

&uart0 {
	status        = "okay";
	current-speed = <115200>;
	pinctrl-0     = <&uart0_default>;
	pinctrl-names = "default";
};

&spi3 {
	status        = "okay";
	#address-cells = <1>;
	#size-cells    = <0>;
	pinctrl-0      = <&spim3_default>;
	pinctrl-names  = "default";
	cs-gpios       = <&gpio0 18 GPIO_ACTIVE_LOW>;

	lora: lora@0 {
		compatible            = "semtech,sx1276";
		reg                   = <0>;
		spi-max-frequency     = <8000000>;
		reset-gpios           = <&gpio0 23 GPIO_ACTIVE_LOW>;
		dio1-gpios            = <&gpio0 26 GPIO_ACTIVE_HIGH>;
		power-amplifier-output = "pa-boost";
	};
};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&flash0 {
	status = "okay";
	partitions {
		compatible     = "fixed-partitions";
		#address-cells = <1>;
		#size-cells    = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg   = <0x00000000 0x00010000>;
		};
		slot0_partition: partition@10000 {
			label = "image-0";
			reg   = <0x00010000 0x00180000>;
		};
		slot1_partition: partition@190000 {
			label = "image-1";
			reg   = <0x00190000 0x00180000>;
		};
		storage_partition: partition@310000 {
			label = "storage";
			reg   = <0x00310000 0x000F0000>;
		};
	};
};