Files
loramodem/app/Kconfig
maze 45d1364a71 Add XIAO Wio-SX1262 overlay; support SX12xx bandwidths (including 62.5 kHz) as default
- boards/seeed/xiao_wio_sx1262: add overlay, .conf, board.yml
- app: support full set of SX12xx bandwidths; default BW set to 62 (62.5 kHz)
- Update Kconfig and prj.conf
- Update lora_modem.h/c for validation and mapping
2026-03-26 13:01:47 +01:00

72 lines
1.8 KiB
Plaintext

mainmenu "LoRa KISS Modem Configuration"
source "Kconfig.zephyr"
menu "KISS Interface"
config LORAMODEM_KISS_IFACE_USB
bool "Use USB CDC-ACM as KISS serial interface"
depends on USB_DEVICE_STACK || USB_DEVICE_STACK_NEXT
help
Use USB CDC-ACM virtual serial port for the KISS interface.
Requires the host to enumerate the device before framing begins.
The board overlay must define the loramodem,kiss-uart chosen node
pointing to a cdc_acm_uart instance.
config LORAMODEM_KISS_IFACE_UART
bool "Use hardware UART as KISS serial interface"
default y if !LORAMODEM_KISS_IFACE_USB
help
Use a hardware UART for the KISS interface.
The board overlay must define the loramodem,kiss-uart chosen node
pointing to the desired uart instance.
endmenu
menu "LoRa Radio Parameters"
config LORAMODEM_LORA_FREQ_HZ
int "Center frequency (Hz)"
default 915000000
help
LoRa radio center frequency in Hz.
Common values: 915000000 (US/AU), 868000000 (EU), 433000000 (Asia).
config LORAMODEM_LORA_SF
int "Spreading factor"
default 9
range 7 12
help
LoRa spreading factor. Higher values increase range and time-on-air.
config LORAMODEM_LORA_BW
int "Bandwidth (kHz)"
default 62
help
LoRa bandwidth in kHz. Supported values include: 7, 10, 15, 20, 31, 41, 62 (62.5 kHz), 125, 200, 250, 400, 500, 800, 1000, 1600.
config LORAMODEM_LORA_CR
int "Coding rate denominator"
default 5
range 5 8
help
LoRa coding rate as the denominator N of 4/N.
5 = 4/5 (lowest overhead), 8 = 4/8 (highest redundancy).
config LORAMODEM_LORA_TX_POWER_DBM
int "TX power (dBm)"
default 14
range 2 22
config LORAMODEM_LORA_PREAMBLE_LEN
int "Preamble length (symbols)"
default 8
range 6 65535
endmenu
config LORAMODEM_MAX_PACKET_SIZE
int "Maximum LoRa packet payload size (bytes)"
default 255
range 1 255