qmk-keychron-q3-colemak-dh/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

// #define USB_VBUS_PIN        B10
#define SPLIT_HAND_PIN      C14  // high = left, low = right

// WS2812 RGB LED strip input and number of LEDs
#define WS2812_PWM_DRIVER   PWMD3  // default: PWMD2
#define WS2812_PWM_CHANNEL  1      // default: 2
#define WS2812_PWM_PAL_MODE 2      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
// #define WS2812_PWM_DMA_STREAM   STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_PWM_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.

#define DEBUG_LED_PIN C13

/* Audio config */
#define AUDIO_PIN     A5
#define AUDIO_PIN_ALT A4
#define AUDIO_PIN_ALT_AS_NEGATIVE

/* serial.c configuration for split keyboard */
#define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
#define SERIAL_USART_TX_PIN      A9
#define SERIAL_USART_RX_PIN      A10
#define SERIAL_USART_DRIVER      SD1
#define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100

/* i2c config for oleds */
#define I2C_DRIVER               I2CD1
#define I2C1_SCL_PIN             B6
#define I2C1_SDA_PIN             B7
#define I2C1_SCL_PAL_MODE        4
#define I2C1_SDA_PAL_MODE        4
#define I2C1_CLOCK_SPEED         400000

/* spi config for eeprom and pmw3360 sensor */
#define SPI_DRIVER                           SPID2
#define SPI_SCK_PIN                          B13
#define SPI_SCK_PAL_MODE                     5
#define SPI_MOSI_PIN                         B15
#define SPI_MOSI_PAL_MODE                    5
#define SPI_MISO_PIN                         B14
#define SPI_MISO_PAL_MODE                    5

/* eeprom config */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
// #define EXTERNAL_EEPROM_BYTE_COUNT           8196
// #define EXTERNAL_EEPROM_PAGE_SIZE            32
// #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
// #define DEBUG_EEPROM_OUTPUT

/* pmw3360 config  */
#define PMW33XX_CS_PIN                       B9
#define PMW33XX_SPI_DIVISOR                  8
[Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 18:30:25 +02:00			`/*`
			`Copyright 2012 Jun Wako <wakojun@gmail.com>`
			`Copyright 2015 Jack Humbert`

			`This program is free software: you can redistribute it and/or modify`
			`it under the terms of the GNU General Public License as published by`
			`the Free Software Foundation, either version 2 of the License, or`
			`(at your option) any later version.`

			`This program is distributed in the hope that it will be useful,`
			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`GNU General Public License for more details.`

			`You should have received a copy of the GNU General Public License`
			`along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

			`#pragma once`

			`// #define USB_VBUS_PIN B10`
			`#define SPLIT_HAND_PIN C14 // high = left, low = right`

			`// WS2812 RGB LED strip input and number of LEDs`
			`#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2`
			`#define WS2812_PWM_CHANNEL 1 // default: 2`
			`#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2`
			`//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).`
WS2812 PWM: prefix for DMA defines (#23111) * WS2812 PWM: prefix for DMA defines * Add backward compatibility defines 2024-03-02 18:16:47 +01:00			`// #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.`
			`#define WS2812_PWM_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.`
[Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 18:30:25 +02:00
			`#define DEBUG_LED_PIN C13`

			`/* Audio config */`
			`#define AUDIO_PIN A5`
			`#define AUDIO_PIN_ALT A4`
			`#define AUDIO_PIN_ALT_AS_NEGATIVE`

			`/* serial.c configuration for split keyboard */`
			`#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.`
			`#define SERIAL_USART_TX_PIN A9`
			`#define SERIAL_USART_RX_PIN A10`
			`#define SERIAL_USART_DRIVER SD1`
			`#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7`
			`#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7`
			`#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100`

			`/* i2c config for oleds */`
			`#define I2C_DRIVER I2CD1`
			`#define I2C1_SCL_PIN B6`
			`#define I2C1_SDA_PIN B7`
			`#define I2C1_SCL_PAL_MODE 4`
			`#define I2C1_SDA_PAL_MODE 4`
			`#define I2C1_CLOCK_SPEED 400000`

			`/* spi config for eeprom and pmw3360 sensor */`
			`#define SPI_DRIVER SPID2`
			`#define SPI_SCK_PIN B13`
			`#define SPI_SCK_PAL_MODE 5`
			`#define SPI_MOSI_PIN B15`
			`#define SPI_MOSI_PAL_MODE 5`
			`#define SPI_MISO_PIN B14`
			`#define SPI_MISO_PAL_MODE 5`

			`/* eeprom config */`
			`#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8`
			`#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8`
			`// #define EXTERNAL_EEPROM_BYTE_COUNT 8196`
			`// #define EXTERNAL_EEPROM_PAGE_SIZE 32`
			`// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2`
			`// #define DEBUG_EEPROM_OUTPUT`

			`/* pmw3360 config */`
[Core] PMW33XX drivers overhaul (#17613) * PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme 2022-07-14 11:50:00 +02:00			`#define PMW33XX_CS_PIN B9`
			`#define PMW33XX_SPI_DIVISOR 8`