qmk-keychron-q3-colemak-dh/keyboards/ymdk/id75/readme.md

# Idobao x YMDK ID75

![Idobao x YMDK ID75](https://imgur.com/bhVfzrzh.jpg)

A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs.

* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
* Hardware Supported: [Idobao x YMDK ID75 PCB (APM32F103CBT6)](https://www.aliexpress.com/item/3256804537842097.html)
  *  This PCB uses an ARM Cortex-M3 MCU with 128kb flash. **It is not the same as `idobao/id75` or `ymdk/ymd75`.**
* Hardware Availability: [YMDK](https://ymdkey.com/products/id75-75-keys-ortholinear-layout-qmk-anodized-aluminum-case-plate-hot-swappable-hot-swap-type-c-pcb-mechanical-keyboard-kit), [AliExpress (YMDK Store)](https://www.aliexpress.com/item/2255800125183974.html), [Amazon](https://www.amazon.com/Ortholinear-Anodized-Aluminum-hot-swappable-Mechanical/dp/B07ZQ8CD88)

Make example for this keyboard (after setting up your build environment):

    make ymdk/id75:default

Flashing example for this keyboard:

    make ymdk/id75:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
* **Physical reset button**: Press the button on the back of the PCB twice in quick succession.
* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner.

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `MT.KEY`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
March merge additions (#417) * fixup: update Vial keymaps per upstream reqs more keycodes renamed `rgb_matrix_indicators_user` return type switched to bool keymaps/encoder maps that exceeded DYNAMIC_KEYMAP_LAYER_COUNT had excess layers removed EOL spaces and backslashes removed from keymaps * fixup: DRIVER_LED_TOTAL --> RGB_MATRIX_LED_COUNT * fixup: Vial-exclusive keyboard configs * fixup: 42keebs rules * fixup: relocated Vial keymaps * fixup: cleanup post-keymap move Remove wavtype/p01_ultra keymaps that went into QMK under different names Fix handwired/misterdeck and 4pplet/waffling60/rev_c keymaps * fixup: Vial-exclusive default keymaps * fixup: remove broken via-only keymaps compiling VIA keymaps is not supported anyway * fixup: non-compiling Vial keymaps * refactor: changes from QMK PR, fix Vial keymap 2023-03-20 17:33:07 +01:00			`# Idobao x YMDK ID75`

			`![Idobao x YMDK ID75](https://imgur.com/bhVfzrzh.jpg)`

			`A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs.`

			`* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)`
			`* Hardware Supported: [Idobao x YMDK ID75 PCB (APM32F103CBT6)](https://www.aliexpress.com/item/3256804537842097.html)`
			* This PCB uses an ARM Cortex-M3 MCU with 128kb flash. It is not the same as `idobao/id75` or `ymdk/ymd75`.
			`* Hardware Availability: [YMDK](https://ymdkey.com/products/id75-75-keys-ortholinear-layout-qmk-anodized-aluminum-case-plate-hot-swappable-hot-swap-type-c-pcb-mechanical-keyboard-kit), [AliExpress (YMDK Store)](https://www.aliexpress.com/item/2255800125183974.html), [Amazon](https://www.amazon.com/Ortholinear-Anodized-Aluminum-hot-swappable-Mechanical/dp/B07ZQ8CD88)`

			`Make example for this keyboard (after setting up your build environment):`

			`make ymdk/id75:default`

			`Flashing example for this keyboard:`

			`make ymdk/id75:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.`
			`* Physical reset button: Press the button on the back of the PCB twice in quick succession.`
			* Keycode in layout: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner.

			After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `MT.KEY`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.