qmk-keychron-q3-colemak-dh/tmk_core/protocol/usb_descriptor.c

1264 lines
46 KiB
C
Raw Normal View History

Update personal layouts, free up matrix_scan_user for JJ40 (#2319) * Add NIU Mini keymap from Planck keymap * Remove old keymap files * Fix README, removed Planck references * Add default layout, move Planck layout to separate folder * Update README * Add my XD60 keymap * Change RShift to slash * Fix keymap: stuck on MO(1) * Move RESET to Fn+Enter * Add: RGB saturation cycle * Add numpad layer to keymap * Fix last case * Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code. * Change default to KEYMAP_MIT, not KEYMAP_OFFSET * Add custom RGB code for JJ40 * Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later. * RGB working on JJ40. * Fix: saturation increase/decrease flipped * Add new directory for my custom keymap with RGB keycodes * Swap LAlt and LGUI * Update JJ40 max power draw with measured value * Update: fun40 rules.mk to enable underglow; earlier failed Travis CI * Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60. * Super rudimentary backlight test, init RGB LEDs on boot * Backlighting works - stays on for now * Toggling working * Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c * Timers not working * Delete global.h * Cleanup * Compiles * Good sign: LEDs stop working again * Handle timer1 overflow * Progress: fix: forgot to init * Backlighting fully working now except breathing. * Revert keymap to original keycodes * Update XD60 keymap README * Update JJ40 keymap with backlight toggles * Breathing working just fine. * Update references * Add backlight_set() call * Cleanup code to disable backlight * Fix: does not compile * Fix: missing call to rgblight_task. * Testing with BACKLIGHT_BREATHING * Cleanup * Cleanup comments * More commenting cleanup. * Do not enable BACKLIGHT_BREATHING by default * Update XD60 keymap * Update: move matrix_scan_kb out from matrix.c to jj40.c (kb-level) * Cleanup for PR * Fix conflict in readme.md for NIU mini * Restore original power consumption figure * Fix: matrix_scan_user() now has to be defined in the keymaps * Add weak `matrix_scan_user` so it does not have to be defined in keymap * Add weak matrix_init_user()
2018-02-02 07:30:47 +01:00
/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "util.h"
#include "report.h"
Merge ChibiOS and LUFA descriptor support (#2362) * Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2018-02-08 21:07:46 +01:00
#include "usb_descriptor.h"
#include "usb_descriptor_common.h"
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 21:02:18 +01:00
#ifdef JOYSTICK_ENABLE
# include "joystick.h"
#endif
#ifdef OS_DETECTION_ENABLE
# include "os_detection.h"
#endif
// clang-format off
/*
* HID report descriptors
*/
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifdef KEYBOARD_SHARED_EP
const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
2019-08-30 20:19:03 +02:00
# define SHARED_REPORT_STARTED
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#else
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = {
#endif
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x06), // Keyboard
HID_RI_COLLECTION(8, 0x01), // Application
#ifdef KEYBOARD_SHARED_EP
HID_RI_REPORT_ID(8, REPORT_ID_KEYBOARD),
#endif
// Modifiers (8 bits)
HID_RI_USAGE_PAGE(8, 0x07), // Keyboard/Keypad
HID_RI_USAGE_MINIMUM(8, 0xE0), // Keyboard Left Control
HID_RI_USAGE_MAXIMUM(8, 0xE7), // Keyboard Right GUI
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x08),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Reserved (1 byte)
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
// Keycodes (6 bytes)
HID_RI_USAGE_PAGE(8, 0x07), // Keyboard/Keypad
HID_RI_USAGE_MINIMUM(8, 0x00),
HID_RI_USAGE_MAXIMUM(8, 0xFF),
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(16, 0x00FF),
HID_RI_REPORT_COUNT(8, 0x06),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
// Status LEDs (5 bits)
HID_RI_USAGE_PAGE(8, 0x08), // LED
HID_RI_USAGE_MINIMUM(8, 0x01), // Num Lock
HID_RI_USAGE_MAXIMUM(8, 0x05), // Kana
HID_RI_REPORT_COUNT(8, 0x05),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
// LED padding (3 bits)
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x03),
HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
HID_RI_END_COLLECTION(0),
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifndef KEYBOARD_SHARED_EP
};
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#endif
#ifdef MOUSE_ENABLE
2019-08-30 20:19:03 +02:00
# ifndef MOUSE_SHARED_EP
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = {
2019-08-30 20:19:03 +02:00
# elif !defined(SHARED_REPORT_STARTED)
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
2019-08-30 20:19:03 +02:00
# define SHARED_REPORT_STARTED
# endif
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x02), // Mouse
HID_RI_COLLECTION(8, 0x01), // Application
2019-08-30 20:19:03 +02:00
# ifdef MOUSE_SHARED_EP
HID_RI_REPORT_ID(8, REPORT_ID_MOUSE),
2019-08-30 20:19:03 +02:00
# endif
HID_RI_USAGE(8, 0x01), // Pointer
HID_RI_COLLECTION(8, 0x00), // Physical
// Buttons (8 bits)
HID_RI_USAGE_PAGE(8, 0x09), // Button
HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1
HID_RI_USAGE_MAXIMUM(8, 0x08), // Button 8
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x08),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
# ifdef MOUSE_EXTENDED_REPORT
// Boot protocol XY ignored in Report protocol
HID_RI_REPORT_COUNT(8, 0x02),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
# endif
// X/Y position (2 or 4 bytes)
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x30), // X
HID_RI_USAGE(8, 0x31), // Y
# ifndef MOUSE_EXTENDED_REPORT
HID_RI_LOGICAL_MINIMUM(8, -127),
HID_RI_LOGICAL_MAXIMUM(8, 127),
HID_RI_REPORT_COUNT(8, 0x02),
HID_RI_REPORT_SIZE(8, 0x08),
# else
HID_RI_LOGICAL_MINIMUM(16, -32767),
HID_RI_LOGICAL_MAXIMUM(16, 32767),
HID_RI_REPORT_COUNT(8, 0x02),
HID_RI_REPORT_SIZE(8, 0x10),
# endif
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
// Vertical wheel (1 byte)
HID_RI_USAGE(8, 0x38), // Wheel
HID_RI_LOGICAL_MINIMUM(8, -127),
HID_RI_LOGICAL_MAXIMUM(8, 127),
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
// Horizontal wheel (1 byte)
HID_RI_USAGE_PAGE(8, 0x0C), // Consumer
HID_RI_USAGE(16, 0x0238), // AC Pan
HID_RI_LOGICAL_MINIMUM(8, -127),
HID_RI_LOGICAL_MAXIMUM(8, 127),
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
HID_RI_END_COLLECTION(0),
2019-08-30 20:19:03 +02:00
HID_RI_END_COLLECTION(0),
# ifndef MOUSE_SHARED_EP
};
2019-08-30 20:19:03 +02:00
# endif
#endif
2022-11-26 17:14:45 +01:00
#ifdef JOYSTICK_ENABLE
# ifndef JOYSTICK_SHARED_EP
const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] = {
# elif !defined(SHARED_REPORT_STARTED)
const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
# define SHARED_REPORT_STARTED
# endif
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x04), // Joystick
HID_RI_COLLECTION(8, 0x01), // Application
# ifdef JOYSTICK_SHARED_EP
HID_RI_REPORT_ID(8, REPORT_ID_JOYSTICK),
# endif
HID_RI_COLLECTION(8, 0x00), // Physical
# if JOYSTICK_AXIS_COUNT > 0
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x30), // X
# if JOYSTICK_AXIS_COUNT > 1
HID_RI_USAGE(8, 0x31), // Y
# endif
# if JOYSTICK_AXIS_COUNT > 2
HID_RI_USAGE(8, 0x32), // Z
# endif
# if JOYSTICK_AXIS_COUNT > 3
HID_RI_USAGE(8, 0x33), // Rx
# endif
# if JOYSTICK_AXIS_COUNT > 4
HID_RI_USAGE(8, 0x34), // Ry
# endif
# if JOYSTICK_AXIS_COUNT > 5
HID_RI_USAGE(8, 0x35), // Rz
# endif
# if JOYSTICK_AXIS_RESOLUTION == 8
HID_RI_LOGICAL_MINIMUM(8, -JOYSTICK_MAX_VALUE),
HID_RI_LOGICAL_MAXIMUM(8, JOYSTICK_MAX_VALUE),
HID_RI_REPORT_COUNT(8, JOYSTICK_AXIS_COUNT),
HID_RI_REPORT_SIZE(8, 0x08),
# else
HID_RI_LOGICAL_MINIMUM(16, -JOYSTICK_MAX_VALUE),
HID_RI_LOGICAL_MAXIMUM(16, JOYSTICK_MAX_VALUE),
HID_RI_REPORT_COUNT(8, JOYSTICK_AXIS_COUNT),
HID_RI_REPORT_SIZE(8, 0x10),
# endif
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
# endif
# if JOYSTICK_BUTTON_COUNT > 0
HID_RI_USAGE_PAGE(8, 0x09), // Button
HID_RI_USAGE_MINIMUM(8, 0x01),
HID_RI_USAGE_MAXIMUM(8, JOYSTICK_BUTTON_COUNT),
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, JOYSTICK_BUTTON_COUNT),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
# if (JOYSTICK_BUTTON_COUNT % 8) != 0
HID_RI_REPORT_COUNT(8, 8 - (JOYSTICK_BUTTON_COUNT % 8)),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
# endif
# endif
HID_RI_END_COLLECTION(0),
HID_RI_END_COLLECTION(0),
# ifndef JOYSTICK_SHARED_EP
};
# endif
#endif
#ifdef DIGITIZER_ENABLE
# ifndef DIGITIZER_SHARED_EP
const USB_Descriptor_HIDReport_Datatype_t PROGMEM DigitizerReport[] = {
# elif !defined(SHARED_REPORT_STARTED)
const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
# define SHARED_REPORT_STARTED
# endif
HID_RI_USAGE_PAGE(8, 0x0D), // Digitizers
HID_RI_USAGE(8, 0x01), // Digitizer
HID_RI_COLLECTION(8, 0x01), // Application
# ifdef DIGITIZER_SHARED_EP
HID_RI_REPORT_ID(8, REPORT_ID_DIGITIZER),
# endif
HID_RI_USAGE(8, 0x20), // Stylus
HID_RI_COLLECTION(8, 0x00), // Physical
// In Range, Tip Switch & Barrel Switch (3 bits)
HID_RI_USAGE(8, 0x32), // In Range
HID_RI_USAGE(8, 0x42), // Tip Switch
HID_RI_USAGE(8, 0x44), // Barrel Switch
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x03),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Padding (5 bits)
HID_RI_REPORT_COUNT(8, 0x05),
HID_RI_INPUT(8, HID_IOF_CONSTANT),
// X/Y Position (4 bytes)
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x30), // X
HID_RI_USAGE(8, 0x31), // Y
HID_RI_LOGICAL_MAXIMUM(16, 0x7FFF),
HID_RI_REPORT_COUNT(8, 0x02),
HID_RI_REPORT_SIZE(8, 0x10),
HID_RI_UNIT(8, 0x33), // Inch, English Linear
HID_RI_UNIT_EXPONENT(8, 0x0E), // -2
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
HID_RI_END_COLLECTION(0),
HID_RI_END_COLLECTION(0),
# ifndef DIGITIZER_SHARED_EP
};
# endif
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#if defined(SHARED_EP_ENABLE) && !defined(SHARED_REPORT_STARTED)
const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
#endif
#ifdef EXTRAKEY_ENABLE
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x80), // System Control
HID_RI_COLLECTION(8, 0x01), // Application
HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM),
HID_RI_USAGE_MINIMUM(8, 0x01), // Pointer
HID_RI_USAGE_MAXIMUM(16, 0x00B7), // System Display LCD Autoscale
HID_RI_LOGICAL_MINIMUM(8, 0x01),
HID_RI_LOGICAL_MAXIMUM(16, 0x00B7),
HID_RI_REPORT_COUNT(8, 1),
HID_RI_REPORT_SIZE(8, 16),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
HID_RI_END_COLLECTION(0),
HID_RI_USAGE_PAGE(8, 0x0C), // Consumer
HID_RI_USAGE(8, 0x01), // Consumer Control
HID_RI_COLLECTION(8, 0x01), // Application
HID_RI_REPORT_ID(8, REPORT_ID_CONSUMER),
HID_RI_USAGE_MINIMUM(8, 0x01), // Consumer Control
HID_RI_USAGE_MAXIMUM(16, 0x02A0), // AC Desktop Show All Applications
HID_RI_LOGICAL_MINIMUM(8, 0x01),
HID_RI_LOGICAL_MAXIMUM(16, 0x02A0),
HID_RI_REPORT_COUNT(8, 1),
HID_RI_REPORT_SIZE(8, 16),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
HID_RI_END_COLLECTION(0),
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifdef PROGRAMMABLE_BUTTON_ENABLE
HID_RI_USAGE_PAGE(8, 0x0C), // Consumer
HID_RI_USAGE(8, 0x01), // Consumer Control
HID_RI_COLLECTION(8, 0x01), // Application
HID_RI_REPORT_ID(8, REPORT_ID_PROGRAMMABLE_BUTTON),
HID_RI_USAGE(8, 0x03), // Programmable Buttons
HID_RI_COLLECTION(8, 0x04), // Named Array
HID_RI_USAGE_PAGE(8, 0x09), // Button
HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1
HID_RI_USAGE_MAXIMUM(8, 0x20), // Button 32
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 32),
HID_RI_REPORT_SIZE(8, 1),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
HID_RI_END_COLLECTION(0),
HID_RI_END_COLLECTION(0),
#endif
#ifdef NKRO_ENABLE
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x06), // Keyboard
HID_RI_COLLECTION(8, 0x01), // Application
HID_RI_REPORT_ID(8, REPORT_ID_NKRO),
// Modifiers (8 bits)
HID_RI_USAGE_PAGE(8, 0x07), // Keyboard/Keypad
HID_RI_USAGE_MINIMUM(8, 0xE0), // Keyboard Left Control
HID_RI_USAGE_MAXIMUM(8, 0xE7), // Keyboard Right GUI
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, 0x08),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Keycodes
HID_RI_USAGE_PAGE(8, 0x07), // Keyboard/Keypad
HID_RI_USAGE_MINIMUM(8, 0x00),
HID_RI_USAGE_MAXIMUM(8, KEYBOARD_REPORT_BITS * 8 - 1),
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(8, 0x01),
HID_RI_REPORT_COUNT(8, KEYBOARD_REPORT_BITS * 8),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Status LEDs (5 bits)
HID_RI_USAGE_PAGE(8, 0x08), // LED
HID_RI_USAGE_MINIMUM(8, 0x01), // Num Lock
HID_RI_USAGE_MAXIMUM(8, 0x05), // Kana
HID_RI_REPORT_COUNT(8, 0x05),
HID_RI_REPORT_SIZE(8, 0x01),
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
// LED padding (3 bits)
HID_RI_REPORT_COUNT(8, 0x01),
HID_RI_REPORT_SIZE(8, 0x03),
HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
HID_RI_END_COLLECTION(0),
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifdef SHARED_EP_ENABLE
};
#endif
2016-11-28 08:31:16 +01:00
#ifdef RAW_ENABLE
const USB_Descriptor_HIDReport_Datatype_t PROGMEM RawReport[] = {
HID_RI_USAGE_PAGE(16, RAW_USAGE_PAGE), // Vendor Defined
HID_RI_USAGE(8, RAW_USAGE_ID), // Vendor Defined
HID_RI_COLLECTION(8, 0x01), // Application
// Data to host
HID_RI_USAGE(8, 0x62), // Vendor Defined
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(16, 0x00FF),
HID_RI_REPORT_COUNT(8, RAW_EPSIZE),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Data from host
HID_RI_USAGE(8, 0x63), // Vendor Defined
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(16, 0x00FF),
HID_RI_REPORT_COUNT(8, RAW_EPSIZE),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
2016-11-28 08:31:16 +01:00
HID_RI_END_COLLECTION(0),
};
#endif
#ifdef CONSOLE_ENABLE
const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] = {
HID_RI_USAGE_PAGE(16, 0xFF31), // Vendor Defined (PJRC Teensy compatible)
HID_RI_USAGE(8, 0x74), // Vendor Defined (PJRC Teensy compatible)
HID_RI_COLLECTION(8, 0x01), // Application
// Data to host
HID_RI_USAGE(8, 0x75), // Vendor Defined
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(16, 0x00FF),
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
// Data from host
HID_RI_USAGE(8, 0x76), // Vendor Defined
HID_RI_LOGICAL_MINIMUM(8, 0x00),
HID_RI_LOGICAL_MAXIMUM(16, 0x00FF),
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
HID_RI_REPORT_SIZE(8, 0x08),
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
HID_RI_END_COLLECTION(0),
};
#endif
/*
* Device descriptor
*/
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = {
.Header = {
.Size = sizeof(USB_Descriptor_Device_t),
.Type = DTYPE_Device
},
.USBSpecification = VERSION_BCD(2, 0, 0),
2016-08-01 07:02:52 +02:00
#if VIRTSER_ENABLE
.Class = USB_CSCP_IADDeviceClass,
.SubClass = USB_CSCP_IADDeviceSubclass,
.Protocol = USB_CSCP_IADDeviceProtocol,
2016-08-01 07:02:52 +02:00
#else
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
2016-08-01 07:02:52 +02:00
#endif
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
// Specified in config.h
.VendorID = VENDOR_ID,
.ProductID = PRODUCT_ID,
.ReleaseNumber = DEVICE_VER,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
#if defined(SERIAL_NUMBER)
.SerialNumStrIndex = 0x03,
#else
.SerialNumStrIndex = 0x00,
#endif
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
#ifndef USB_MAX_POWER_CONSUMPTION
2019-08-30 20:19:03 +02:00
# define USB_MAX_POWER_CONSUMPTION 500
#endif
#ifndef USB_POLLING_INTERVAL_MS
# define USB_POLLING_INTERVAL_MS 1
#endif
/*
* Configuration descriptors
*/
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = {
.Config = {
.Header = {
.Size = sizeof(USB_Descriptor_Configuration_Header_t),
.Type = DTYPE_Configuration
},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = TOTAL_INTERFACES,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP),
.MaxPowerConsumption = USB_CONFIG_POWER_MA(USB_MAX_POWER_CONSUMPTION)
},
#ifndef KEYBOARD_SHARED_EP
/*
* Keyboard
*/
.Keyboard_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = KEYBOARD_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_BootSubclass,
.Protocol = HID_CSCP_KeyboardBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Keyboard_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(KeyboardReport)
},
.Keyboard_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = USB_POLLING_INTERVAL_MS
},
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#endif
#ifdef RAW_ENABLE
/*
* Raw HID
*/
.Raw_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = RAW_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 2,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Raw_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(RawReport)
},
.Raw_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | RAW_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = RAW_EPSIZE,
.PollingIntervalMS = 0x01
},
.Raw_OUTEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_OUT | RAW_OUT_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = RAW_EPSIZE,
.PollingIntervalMS = 0x01
},
#endif
#if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP)
/*
* Mouse
*/
.Mouse_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = MOUSE_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_BootSubclass,
.Protocol = HID_CSCP_MouseBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Mouse_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(MouseReport)
},
.Mouse_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MOUSE_EPSIZE,
.PollingIntervalMS = USB_POLLING_INTERVAL_MS
},
#endif
#ifdef SHARED_EP_ENABLE
/*
* Shared
*/
.Shared_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = SHARED_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
2019-08-30 20:19:03 +02:00
# ifdef KEYBOARD_SHARED_EP
.SubClass = HID_CSCP_BootSubclass,
.Protocol = HID_CSCP_KeyboardBootProtocol,
2019-08-30 20:19:03 +02:00
# else
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
2019-08-30 20:19:03 +02:00
# endif
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Shared_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(SharedReport)
},
.Shared_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | SHARED_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = SHARED_EPSIZE,
.PollingIntervalMS = USB_POLLING_INTERVAL_MS
},
#endif
#ifdef CONSOLE_ENABLE
/*
* Console
*/
.Console_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = CONSOLE_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 2,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Console_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(ConsoleReport)
},
.Console_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | CONSOLE_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CONSOLE_EPSIZE,
.PollingIntervalMS = 0x01
},
.Console_OUTEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_OUT | CONSOLE_OUT_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CONSOLE_EPSIZE,
.PollingIntervalMS = 0x01
},
#endif
2013-07-28 10:34:41 +02:00
2015-08-21 16:46:53 +02:00
#ifdef MIDI_ENABLE
/*
* MIDI
*/
.Audio_Interface_Association = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_Association_t),
.Type = DTYPE_InterfaceAssociation
},
.FirstInterfaceIndex = AC_INTERFACE,
.TotalInterfaces = 2,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_ControlSubclass,
.Protocol = AUDIO_CSCP_ControlProtocol,
.IADStrIndex = NO_DESCRIPTOR,
},
.Audio_ControlInterface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = AC_INTERFACE,
.AlternateSetting = 0,
.TotalEndpoints = 0,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_ControlSubclass,
.Protocol = AUDIO_CSCP_ControlProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_ControlInterface_SPC = {
.Header = {
.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_Header,
.ACSpecification = VERSION_BCD(1, 0, 0),
.TotalLength = sizeof(USB_Audio_Descriptor_Interface_AC_t),
.InCollection = 1,
.InterfaceNumber = AS_INTERFACE,
},
.Audio_StreamInterface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = AS_INTERFACE,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = AUDIO_CSCP_AudioClass,
.SubClass = AUDIO_CSCP_MIDIStreamingSubclass,
.Protocol = AUDIO_CSCP_StreamingProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Audio_StreamInterface_SPC = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_General,
.AudioSpecification = VERSION_BCD(1, 0, 0),
.TotalLength = offsetof(USB_Descriptor_Configuration_t, MIDI_Out_Jack_Endpoint_SPC) + sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t) - offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC)
},
.MIDI_In_Jack_Emb = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_InputJack_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x01,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Ext = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_InputJack_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x02,
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Emb = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_Embedded,
.JackID = 0x03,
.NumberOfPins = 1,
.SourceJackID = {0x02},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_Out_Jack_Ext = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t),
.Type = AUDIO_DTYPE_CSInterface
},
.Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
.JackType = MIDI_JACKTYPE_External,
.JackID = 0x04,
.NumberOfPins = 1,
.SourceJackID = {0x01},
.SourcePinID = {0x01},
.JackStrIndex = NO_DESCRIPTOR
},
.MIDI_In_Jack_Endpoint = {
.Endpoint = {
.Header = {
.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x05
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.MIDI_In_Jack_Endpoint_SPC = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t),
.Type = AUDIO_DTYPE_CSEndpoint
},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.TotalEmbeddedJacks = 0x01,
.AssociatedJackID = {0x01}
},
.MIDI_Out_Jack_Endpoint = {
.Endpoint = {
.Header = {
.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0x05
},
.Refresh = 0,
.SyncEndpointNumber = 0
},
.MIDI_Out_Jack_Endpoint_SPC = {
.Header = {
.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t),
.Type = AUDIO_DTYPE_CSEndpoint
},
.Subtype = AUDIO_DSUBTYPE_CSEndpoint_General,
.TotalEmbeddedJacks = 0x01,
.AssociatedJackID = {0x03}
},
2016-08-01 07:02:52 +02:00
#endif
#ifdef VIRTSER_ENABLE
/*
* Virtual Serial
*/
.CDC_Interface_Association = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_Association_t),
.Type = DTYPE_InterfaceAssociation
},
.FirstInterfaceIndex = CCI_INTERFACE,
.TotalInterfaces = 2,
.Class = CDC_CSCP_CDCClass,
.SubClass = CDC_CSCP_ACMSubclass,
.Protocol = CDC_CSCP_ATCommandProtocol,
.IADStrIndex = NO_DESCRIPTOR,
},
.CDC_CCI_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = CCI_INTERFACE,
.AlternateSetting = 0,
.TotalEndpoints = 1,
.Class = CDC_CSCP_CDCClass,
.SubClass = CDC_CSCP_ACMSubclass,
.Protocol = CDC_CSCP_ATCommandProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_Functional_Header = {
.Header = {
.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t),
.Type = CDC_DTYPE_CSInterface
},
.Subtype = 0x00,
.CDCSpecification = VERSION_BCD(1, 1, 0),
},
.CDC_Functional_ACM = {
.Header = {
.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t),
.Type = CDC_DTYPE_CSInterface
},
.Subtype = 0x02,
.Capabilities = 0x02,
},
.CDC_Functional_Union = {
.Header = {
.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t),
.Type = CDC_DTYPE_CSInterface
},
.Subtype = 0x06,
.MasterInterfaceNumber = CCI_INTERFACE,
.SlaveInterfaceNumber = CDI_INTERFACE,
},
.CDC_NotificationEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
.CDC_DCI_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = CDI_INTERFACE,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = CDC_CSCP_CDCDataClass,
.SubClass = CDC_CSCP_NoDataSubclass,
.Protocol = CDC_CSCP_NoDataProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.CDC_DataOutEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_OUT | CDC_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_EPSIZE,
.PollingIntervalMS = 0x05
},
.CDC_DataInEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | CDC_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_EPSIZE,
.PollingIntervalMS = 0x05
},
2015-08-21 16:46:53 +02:00
#endif
Hid joystick interface (#4226) * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-25 14:01:15 +02:00
2022-11-26 17:14:45 +01:00
#if defined(JOYSTICK_ENABLE) && !defined(JOYSTICK_SHARED_EP)
Hid joystick interface (#4226) * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-25 14:01:15 +02:00
/*
* Joystick
*/
.Joystick_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = JOYSTICK_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Joystick_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(JoystickReport)
},
.Joystick_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = JOYSTICK_EPSIZE,
.PollingIntervalMS = USB_POLLING_INTERVAL_MS
}
#endif
#if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP)
/*
* Digitizer
*/
.Digitizer_Interface = {
.Header = {
.Size = sizeof(USB_Descriptor_Interface_t),
.Type = DTYPE_Interface
},
.InterfaceNumber = DIGITIZER_INTERFACE,
.AlternateSetting = 0x00,
.TotalEndpoints = 1,
.Class = HID_CSCP_HIDClass,
.SubClass = HID_CSCP_NonBootSubclass,
.Protocol = HID_CSCP_NonBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Digitizer_HID = {
.Header = {
.Size = sizeof(USB_HID_Descriptor_HID_t),
.Type = HID_DTYPE_HID
},
.HIDSpec = VERSION_BCD(1, 1, 1),
.CountryCode = 0x00,
.TotalReportDescriptors = 1,
.HIDReportType = HID_DTYPE_Report,
.HIDReportLength = sizeof(DigitizerReport)
},
.Digitizer_INEndpoint = {
.Header = {
.Size = sizeof(USB_Descriptor_Endpoint_t),
.Type = DTYPE_Endpoint
},
.EndpointAddress = (ENDPOINT_DIR_IN | DIGITIZER_IN_EPNUM),
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = DIGITIZER_EPSIZE,
.PollingIntervalMS = USB_POLLING_INTERVAL_MS
},
#endif
};
/*
* String descriptors
*/
const USB_Descriptor_String_t PROGMEM LanguageString = {
.Header = {
.Size = 4,
.Type = DTYPE_String
},
.UnicodeString = {LANGUAGE_ID_ENG}
};
const USB_Descriptor_String_t PROGMEM ManufacturerString = {
.Header = {
.Size = sizeof(USBSTR(MANUFACTURER)),
.Type = DTYPE_String
},
.UnicodeString = USBSTR(MANUFACTURER)
};
const USB_Descriptor_String_t PROGMEM ProductString = {
.Header = {
.Size = sizeof(USBSTR(PRODUCT)),
.Type = DTYPE_String
},
.UnicodeString = USBSTR(PRODUCT)
};
#if defined(SERIAL_NUMBER)
const USB_Descriptor_String_t PROGMEM SerialNumberString = {
.Header = {
.Size = sizeof(USBSTR(SERIAL_NUMBER)),
.Type = DTYPE_String
},
.UnicodeString = USBSTR(SERIAL_NUMBER)
};
#endif
// clang-format on
/**
* This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t get_usb_descriptor(const uint16_t wValue, const uint16_t wIndex, const uint16_t wLength, const void** const DescriptorAddress) {
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorIndex = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType) {
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorIndex) {
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
#if defined(SERIAL_NUMBER)
case 0x03:
Address = &SerialNumberString;
Size = pgm_read_byte(&SerialNumberString.Header.Size);
break;
#endif
}
#ifdef OS_DETECTION_ENABLE
process_wlength(wLength);
#endif
break;
case HID_DTYPE_HID:
switch (wIndex) {
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifndef KEYBOARD_SHARED_EP
case KEYBOARD_INTERFACE:
Address = &ConfigurationDescriptor.Keyboard_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP)
case MOUSE_INTERFACE:
Address = &ConfigurationDescriptor.Mouse_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifdef SHARED_EP_ENABLE
case SHARED_INTERFACE:
Address = &ConfigurationDescriptor.Shared_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
#endif
2016-11-28 08:31:16 +01:00
#ifdef RAW_ENABLE
case RAW_INTERFACE:
Address = &ConfigurationDescriptor.Raw_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
2016-11-28 08:31:16 +01:00
#endif
#ifdef CONSOLE_ENABLE
case CONSOLE_INTERFACE:
Address = &ConfigurationDescriptor.Console_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
#endif
2022-11-26 17:14:45 +01:00
#if defined(JOYSTICK_ENABLE) && !defined(JOYSTICK_SHARED_EP)
Hid joystick interface (#4226) * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-25 14:01:15 +02:00
case JOYSTICK_INTERFACE:
Address = &ConfigurationDescriptor.Joystick_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
#endif
#if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP)
case DIGITIZER_INTERFACE:
Address = &ConfigurationDescriptor.Digitizer_HID;
Size = sizeof(USB_HID_Descriptor_HID_t);
break;
#endif
}
break;
case HID_DTYPE_Report:
switch (wIndex) {
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifndef KEYBOARD_SHARED_EP
case KEYBOARD_INTERFACE:
Address = &KeyboardReport;
Size = sizeof(KeyboardReport);
break;
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP)
case MOUSE_INTERFACE:
Address = &MouseReport;
Size = sizeof(MouseReport);
break;
#endif
Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-16 07:22:05 +01:00
#ifdef SHARED_EP_ENABLE
case SHARED_INTERFACE:
Address = &SharedReport;
Size = sizeof(SharedReport);
break;
#endif
2016-11-28 08:31:16 +01:00
#ifdef RAW_ENABLE
case RAW_INTERFACE:
Address = &RawReport;
Size = sizeof(RawReport);
break;
2016-11-28 08:31:16 +01:00
#endif
#ifdef CONSOLE_ENABLE
case CONSOLE_INTERFACE:
Address = &ConsoleReport;
Size = sizeof(ConsoleReport);
break;
#endif
2022-11-26 17:14:45 +01:00
#if defined(JOYSTICK_ENABLE) && !defined(JOYSTICK_SHARED_EP)
Hid joystick interface (#4226) * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-25 14:01:15 +02:00
case JOYSTICK_INTERFACE:
Address = &JoystickReport;
Size = sizeof(JoystickReport);
break;
#endif
#if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP)
case DIGITIZER_INTERFACE:
Address = &DigitizerReport;
Size = sizeof(DigitizerReport);
break;
Hid joystick interface (#4226) * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-25 14:01:15 +02:00
#endif
}
break;
}
*DescriptorAddress = Address;
return Size;
}