qmk-keychron-q3-colemak-dh/keyboards/gh60/satan/readme.md

# Satan GH60

A clone of the GH60 60% keyboard, with full backlighting support.

Keyboard Maintainer: QMK Community  
Hardware Supported: Satan GH60 PCB  
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/

Make example for this keyboard (after setting up your build environment):

    make gh60/satan:default

**Note:** This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing. 

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## RGB Underglow (WS2812B LED Strip)

This board also supports underglow with a slight mod.

Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:

![controller](https://i.imgur.com/9vyRBoT.jpg)

Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:

![power](https://i.imgur.com/pHMZHLP.jpg)

## ISP Header

If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:

| 1 |  2 | 3 |  4 |   5 | 6 |  7 |
|---|----|---|----|-----|---|----|
|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here 2019-02-28 21:06:26 +01:00			`# Satan GH60`
remove .hex, .PNG, .jpg 2017-06-12 04:16:42 +02:00
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here 2019-02-28 21:06:26 +01:00			`A clone of the GH60 60% keyboard, with full backlighting support.`
Make the bulk of our keyboards match the readme.md standard 2017-08-17 00:08:16 +02:00
Satan refactor and Configurator support (#3305) * Matrix refactor * Keymap refactor * Configurator support * Readme cleanup 2018-07-05 03:02:01 +02:00			`Keyboard Maintainer: QMK Community`
			`Hardware Supported: Satan GH60 PCB`
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here 2019-02-28 21:06:26 +01:00			`Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/`
Make the bulk of our keyboards match the readme.md standard 2017-08-17 00:08:16 +02:00
			`Make example for this keyboard (after setting up your build environment):`

GH60 Refactor: Move Satan into GH60 directory (#6485) * Move Satan into the GH60 directory to avoid the confusion of what PCB people have * set bootmagic to lite * rename gh60 file to revc 2019-08-05 08:06:33 +02:00			`make gh60/satan:default`

			`Note: This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing.`
Make the bulk of our keyboards match the readme.md standard 2017-08-17 00:08:16 +02:00
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here 2019-02-28 21:06:26 +01:00			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## RGB Underglow (WS2812B LED Strip)`

			`This board also supports underglow with a slight mod.`

			`Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:`

			`![controller](https://i.imgur.com/9vyRBoT.jpg)`

			`Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:`

			`![power](https://i.imgur.com/pHMZHLP.jpg)`

			`## ISP Header`

			`If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:`

			`\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \|`
			`\|---\|----\|---\|----\|-----\|---\|----\|`
			`\|VCC\|MISO\|SCK\|MOSI\|RESET\|GND\|NC\|`