keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
24d824aae4
qmk-keychron-q3-colemak-dh/builddefs/build_keyboard.mk

575 lines
21 KiB
Makefile
Raw Normal View History

Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Determine what keyboard we are building and setup the build environment.
#
# We support folders up to 5 levels deep below `keyboards/`. This file is
# responsible for determining which folder is being used and doing the
# corresponding environment setup.
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
ifndef VERBOSE
.SILENT:
endif
.DEFAULT_GOAL := all
Migrate makefile utilities to sub-directory (#14917)
2021-10-28 02:07:53 +02:00
include paths.mk
include $(BUILDDEFS_PATH)/message.mk
Change order of variable assignment BUILD_DIR and TARGET was assigned too late, so the dfu-util target, which depends on them did not work.
2016-08-21 12:53:36 +02:00
Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376)
2022-06-29 23:42:23 +02:00
# Helper to add defines with a 'QMK_' prefix
define add_qmk_prefix_defs
ifdef $1
# Need to cater for 'STM32L4xx+'
OPT_DEFS += -DQMK_$(2)="$($1)" -DQMK_$(2)_$(shell echo $($1) | sed -e 's@+@Plus@g' -e 's@[^a-zA-Z0-9]@_@g' | tr '[:lower:]' '[:upper:]')
endif
endef
Begin the process of deprecating bin/qmk in favor of the global cli (#12109) * Begin the process of deprecating bin/qmk in favor of the global cli * Correctly set the qmk bin
2021-03-08 04:10:03 +01:00
# Set the qmk cli to use
QMK_BIN ?= qmk
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Set the filename for the final firmware binary
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
Change order of variable assignment BUILD_DIR and TARGET was assigned too late, so the dfu-util target, which depends on them did not work.
2016-08-21 12:53:36 +02:00
Add step summary output to CI builds, with failure logs. (#20288)
2023-03-29 06:55:31 +02:00
ifeq ($(strip $(DUMP_CI_METADATA)),yes)
$(info CI Metadata: KEYBOARD=$(KEYBOARD))
$(info CI Metadata: KEYMAP=$(KEYMAP))
endif
Change order of variable assignment BUILD_DIR and TARGET was assigned too late, so the dfu-util target, which depends on them did not work.
2016-08-21 12:53:36 +02:00
# Force expansion
TARGET := $(TARGET)
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
ifneq ($(FORCE_LAYOUT),)
TARGET := $(TARGET)_$(FORCE_LAYOUT)
endif
# Object files and generated keymap directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
INTERMEDIATE_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522) * add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-15 06:31:56 +01:00
ifdef SKIP_VERSION
OPT_DEFS += -DSKIP_VERSION
endif
Various Makefile optimisations (#16015)
2022-01-25 00:54:56 +01:00
# Generate the version.h file
Accumulate version.h generator flags. (#19716)
2023-01-30 09:47:46 +01:00
VERSION_H_FLAGS :=
Various Makefile optimisations (#16015)
2022-01-25 00:54:56 +01:00
ifdef SKIP_VERSION
Accumulate version.h generator flags. (#19716)
2023-01-30 09:47:46 +01:00
VERSION_H_FLAGS += --skip-all
Various Makefile optimisations (#16015)
2022-01-25 00:54:56 +01:00
endif
ifdef SKIP_GIT
Accumulate version.h generator flags. (#19716)
2023-01-30 09:47:46 +01:00
VERSION_H_FLAGS += --skip-git
Various Makefile optimisations (#16015)
2022-01-25 00:54:56 +01:00
endif
Ensure `version.h` is recreated each build. (#16188)
2022-02-03 21:36:02 +01:00
# Generate the board's version.h file.
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o $(INTERMEDIATE_OUTPUT)/src/version.h)
Ensure `version.h` is recreated each build. (#16188)
2022-02-03 21:36:02 +01:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Determine which subfolders exist.
KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_PATHS :=
KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Pull in rules.mk files from all our subfolders
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
include $(KEYBOARD_PATH_5)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
include $(KEYBOARD_PATH_4)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
include $(KEYBOARD_PATH_3)/rules.mk
Actual compilation
2016-08-08 09:26:23 +02:00
endif
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
include $(KEYBOARD_PATH_2)/rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
include $(KEYBOARD_PATH_1)/rules.mk
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
# Pull in rules from DD keyboard config
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_rules.mk)
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
include $(INFO_RULES_MK)
QMK CLI and JSON keymap support (#6176) * Script to generate keymap.c from JSON file. * Support for keymap.json * Add a warning about the keymap.c getting overwritten. * Fix keymap generating * Install the python deps * Flesh out more of the python environment * Remove defunct json2keymap * Style everything with yapf * Polish up python support * Hide json keymap.c into the .build dir * Polish up qmk-compile-json * Make milc work with positional arguments * Fix a couple small things * Fix some errors and make the CLI more understandable * Make the qmk wrapper more robust * Add basic QMK Doctor * Clean up docstrings and flesh them out as needed * remove unused compile_firmware() function
2019-07-15 21:14:27 +02:00
# Check for keymap.json first, so we can regenerate keymap.c
Migrate more makefile utilities to builddefs sub-directory (#16002)
2022-02-10 18:45:51 +01:00
include $(BUILDDEFS_PATH)/build_json.mk
QMK CLI and JSON keymap support (#6176) * Script to generate keymap.c from JSON file. * Support for keymap.json * Add a warning about the keymap.c getting overwritten. * Fix keymap generating * Install the python deps * Flesh out more of the python environment * Remove defunct json2keymap * Style everything with yapf * Polish up python support * Hide json keymap.c into the .build dir * Polish up qmk-compile-json * Make milc work with positional arguments * Fix a couple small things * Fix some errors and make the CLI more understandable * Make the qmk wrapper more robust * Add basic QMK Doctor * Clean up docstrings and flesh them out as needed * remove unused compile_firmware() function
2019-07-15 21:14:27 +02:00
add 'include keyboard_features.mk' into build_keyboard.mk (#8422) * add 'include keyboard_features.mk' into build_keyboard.mk keyboard_features.mk is a keyboard-local version of the functions performed by common_features.mk. * add comment into build_keyboard.mk * added description of keyboard_features.mk in hardware_keyboard_guidelines.md. * rename `keyboard_features.mk` to `post_rules.mk`
2021-08-29 01:42:57 +02:00
# Pull in keymap level rules.mk
QMK Userspace (#22222) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-11-27 21:53:43 +01:00
ifeq ("$(wildcard $(KEYMAP_PATH))", "")
# Look through the possible keymap folders until we find a matching keymap.c
ifneq ($(QMK_USERSPACE),)
ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/rules.mk
KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.c
KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)
else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/rules.mk
KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.c
KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)
else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/rules.mk
KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.c
KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)
else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/rules.mk
KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.c
KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)
else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/rules.mk
KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.c
KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)
endif
endif
ifeq ($(KEYMAP_PATH),)
ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_1)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_2)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_3)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_4)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-include $(MAIN_KEYMAP_PATH_5)/rules.mk
KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
else ifneq ($(LAYOUTS),)
# If we haven't found a keymap yet fall back to community layouts
include $(BUILDDEFS_PATH)/build_layout.mk
else ifeq ("$(wildcard $(KEYMAP_JSON_PATH))", "") # Not finding keymap.c is fine if we found a keymap.json
$(call CATASTROPHIC_ERROR,Invalid keymap,Could not find keymap)
# this state should never be reached
endif
endif
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
endif
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
# Have we found a keymap.json?
ifneq ("$(wildcard $(KEYMAP_JSON))", "")
[Feature] Compilation warning if both `keymap.json` and `keymap.c` exist (#19939) Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-09-25 06:17:50 +02:00
ifneq ("$(wildcard $(KEYMAP_C))", "")
$(call WARNING_MESSAGE,Keymap is specified as both keymap.json and keymap.c -- keymap.json file wins.)
endif
KEYMAP_PATH := $(KEYMAP_JSON_PATH)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
KEYMAP_C := $(INTERMEDIATE_OUTPUT)/src/keymap.c
KEYMAP_H := $(INTERMEDIATE_OUTPUT)/src/config.h
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
# Load the keymap-level rules.mk if exists
-include $(KEYMAP_PATH)/rules.mk
# Load any rules.mk content from keymap.json
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(INTERMEDIATE_OUTPUT)/src/rules.mk $(KEYMAP_JSON))
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
include $(INFO_RULES_MK)
Fix issues with recent keymap.json changes (#14089) * Fix issues with recent keymap.json changes * Allow empty author string
2021-08-20 11:11:49 +02:00
# Add rules to generate the keymap files - indentation here is important
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(INTERMEDIATE_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
$(eval CMD=$(QMK_BIN) json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON))
@$(BUILD_CMD)
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(INTERMEDIATE_OUTPUT)/src/config.h: $(KEYMAP_JSON)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
Build correctly when out of tree (#18775)
2022-10-19 18:43:25 +02:00
$(eval CMD=$(QMK_BIN) generate-config-h --quiet --output $(KEYMAP_H) $(KEYMAP_JSON))
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(BUILD_CMD)
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
generated-files: $(INTERMEDIATE_OUTPUT)/src/config.h $(INTERMEDIATE_OUTPUT)/src/keymap.c
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
endif
Refactor CTPC logic to allow future converters (#16621) * Refactor CTPC logic to allow future converters * Update builddefs/converters.mk Co-authored-by: Stefan Kerkmann <karlk90@pm.me> Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-04-03 19:22:52 +02:00
include $(BUILDDEFS_PATH)/converters.mk
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
Split out mcu_selection to platform (#19701)
2023-01-28 21:40:47 +01:00
MCU_ORIG := $(MCU)
include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk)
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
# PLATFORM_KEY should be detected in DD keyboard config via key 'processor' (or rules.mk 'MCU')
De-duplicate platform detection (#19603)
2023-01-19 01:27:00 +01:00
ifeq ($(PLATFORM_KEY),)
$(call CATASTROPHIC_ERROR,Platform not defined)
endif
PLATFORM=$(shell echo $(PLATFORM_KEY) | tr '[:lower:]' '[:upper:]')
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Find all the C source files to be compiled in subfolders.
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
KEYBOARD_SRC :=
KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
Actual compilation
2016-08-08 09:26:23 +02:00
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
ifneq ("$(wildcard $(KEYBOARD_C_5))","")
KEYBOARD_SRC += $(KEYBOARD_C_5)
endif
ifneq ("$(wildcard $(KEYBOARD_C_4))","")
KEYBOARD_SRC += $(KEYBOARD_C_4)
endif
ifneq ("$(wildcard $(KEYBOARD_C_3))","")
KEYBOARD_SRC += $(KEYBOARD_C_3)
endif
ifneq ("$(wildcard $(KEYBOARD_C_2))","")
KEYBOARD_SRC += $(KEYBOARD_C_2)
endif
ifneq ("$(wildcard $(KEYBOARD_C_1))","")
KEYBOARD_SRC += $(KEYBOARD_C_1)
endif
Fix LAYOUT define generation (#4148) * Fix LAYOUT define generation Prior to this, only the full keyboard path was defined. Eg `KEYBOARD_planck_rev6`. But the docs mention `KEYBOAD_planck`, which never actually gets defined. This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists. * Clean up changes to make it more readable
2018-10-16 20:14:52 +02:00
# Generate KEYBOARD_name_subname for all levels of the keyboard folder
KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
Fix LAYOUT define generation (#4148) * Fix LAYOUT define generation Prior to this, only the full keyboard path was defined. Eg `KEYBOARD_planck_rev6`. But the docs mention `KEYBOAD_planck`, which never actually gets defined. This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists. * Clean up changes to make it more readable
2018-10-16 20:14:52 +02:00
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
endif
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
# that the same keymap may be used on multiple keyboards.
#
# We grab the most top-level include file that we can. That file should
docs: some typos (#18582) probably hacktoberism
2022-10-05 18:32:07 +02:00
# use #ifdef statements to include all the necessary subfolder includes,
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# as described here:
#
# https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
#
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
Tidy up LAYOUT macro generation (#18262)
2022-09-19 02:35:46 +02:00
FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
Tidy up LAYOUT macro generation (#18262)
2022-09-19 02:35:46 +02:00
FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
Tidy up LAYOUT macro generation (#18262)
2022-09-19 02:35:46 +02:00
FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
Tidy up LAYOUT macro generation (#18262)
2022-09-19 02:35:46 +02:00
FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
Tidy up LAYOUT macro generation (#18262)
2022-09-19 02:35:46 +02:00
FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
endif
Comment and organize build_keyboard.mk a bit
2018-08-11 20:16:21 +02:00
# Find all of the config.h files and add them to our CONFIG_H define.
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
CONFIG_H :=
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_5)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_4)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_3)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_2)/config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_1)/config.h
Add output specific config file
2016-08-15 07:58:05 +02:00
endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
POST_CONFIG_H :=
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
endif
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
# Create dependencies on DD keyboard config - structure validated elsewhere
DD_CONFIG_FILES :=
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","")
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/info.json
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","")
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/info.json
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","")
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/info.json
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","")
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/info.json
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","")
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/keyboard.json
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
endif
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
CONFIG_H += $(INTERMEDIATE_OUTPUT)/src/info_config.h
KEYBOARD_SRC += $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(DD_CONFIG_FILES)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_config.h)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(BUILD_CMD)
Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * add missing docstring Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 19:27:37 +01:00
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(DD_CONFIG_FILES)
Data driven `g_led_config` (#16728)
2022-05-15 23:39:29 +02:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c)
Data driven `g_led_config` (#16728)
2022-05-15 23:39:29 +02:00
@$(BUILD_CMD)
Enable 'keyboard.json' as a build target (#22891)
2024-03-10 06:20:25 +01:00
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(DD_CONFIG_FILES)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h)
Print out generated files during build (#16672)
2022-03-17 00:45:06 +01:00
@$(BUILD_CMD)
Allow <keyboard>.h to be optional when going data driven (#12706) * Allow <keyboard>.h to be optional when going data driven * Remove stub files as no longer required * Rename function * Remove include of layouts.h for now * Take advantage of type=keyboard_folder * Take advantage of type=keyboard_folder - kb should still be mandatory
2021-05-01 03:00:04 +02:00
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
generated-files: $(INTERMEDIATE_OUTPUT)/src/info_config.h $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h
Fix up build dependencies. (#11435)
2021-01-04 21:36:02 +01:00
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
generated-files: $(INTERMEDIATE_OUTPUT)/src/info_deps.d
Generate `make` dependency file during build for info.json's etc. (#20451)
2023-05-15 13:58:12 +02:00
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(INTERMEDIATE_OUTPUT)/src/info_deps.d:
Generate `make` dependency file during build for info.json's etc. (#20451)
2023-05-15 13:58:12 +02:00
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
$(eval CMD=$(QMK_BIN) generate-make-dependencies -kb $(KEYBOARD) -km $(KEYMAP) -o $(INTERMEDIATE_OUTPUT)/src/info_deps.d)
Generate `make` dependency file during build for info.json's etc. (#20451)
2023-05-15 13:58:12 +02:00
@$(BUILD_CMD)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
-include $(INTERMEDIATE_OUTPUT)/src/info_deps.d
Generate `make` dependency file during build for info.json's etc. (#20451)
2023-05-15 13:58:12 +02:00
Fix up build dependencies. (#11435)
2021-01-04 21:36:02 +01:00
.INTERMEDIATE : generated-files
Revert "[Core] Re-order user space rules inclusion (#17459)" (#18032)
2022-08-13 23:13:15 +02:00
# Userspace setup and definitions
ifeq ("$(USER_NAME)","")
USER_NAME := $(KEYMAP)
endif
USER_PATH := users/$(USER_NAME)
QMK Userspace (#22222) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-11-27 21:53:43 +01:00
# If we have userspace, then add it to the lookup VPATH
ifneq ($(wildcard $(QMK_USERSPACE)),)
VPATH += $(QMK_USERSPACE)
endif
# If the equivalent users directory exists in userspace, use that in preference to anything currently in the main repo
ifneq ($(wildcard $(QMK_USERSPACE)/$(USER_PATH)),)
USER_PATH := $(QMK_USERSPACE)/$(USER_PATH)
endif
Revert "[Core] Re-order user space rules inclusion (#17459)" (#18032)
2022-08-13 23:13:15 +02:00
# Pull in user level rules.mk
-include $(USER_PATH)/rules.mk
move the info.json rules above userspace
2021-01-12 21:50:14 +01:00
ifneq ("$(wildcard $(USER_PATH)/config.h)","")
CONFIG_H += $(USER_PATH)/config.h
endif
Allow post_config.h to be implemented in userspace (#11519) > Rebased and pushed. Squashed and merged. :)
2021-01-29 01:04:37 +01:00
ifneq ("$(wildcard $(USER_PATH)/post_config.h)","")
POST_CONFIG_H += $(USER_PATH)/post_config.h
endif
move the info.json rules above userspace
2021-01-12 21:50:14 +01:00
Add a <FEATURE>_SUPPORTED flag (#9058) * Initial attempt at allowing keyboards to indicate what features they do not support * try to use a for loop instead * Update disable_features.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * add a few more features * remove my test fixture * disable things that make all:all suggested" Co-authored-by: Zach White <skullydazed@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-01-30 22:08:58 +01:00
# Disable features that a keyboard doesn't support
Migrate makefile utilities to sub-directory (#14917)
2021-10-28 02:07:53 +02:00
-include $(BUILDDEFS_PATH)/disable_features.mk
Add a <FEATURE>_SUPPORTED flag (#9058) * Initial attempt at allowing keyboards to indicate what features they do not support * try to use a for loop instead * Update disable_features.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * add a few more features * remove my test fixture * disable things that make all:all suggested" Co-authored-by: Zach White <skullydazed@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-01-30 22:08:58 +01:00
Generalise CTPC logic from common_features (#18803)
2022-10-22 21:39:39 +02:00
ifneq ("$(CONVERTER)","")
-include $(CONVERTER)/post_converter.mk
endif
add 'include keyboard_features.mk' into build_keyboard.mk (#8422) * add 'include keyboard_features.mk' into build_keyboard.mk keyboard_features.mk is a keyboard-local version of the functions performed by common_features.mk. * add comment into build_keyboard.mk * added description of keyboard_features.mk in hardware_keyboard_guidelines.md. * rename `keyboard_features.mk` to `post_rules.mk`
2021-08-29 01:42:57 +02:00
# Pull in post_rules.mk files from all our subfolders
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","")
include $(KEYBOARD_PATH_1)/post_rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_rules.mk)","")
include $(KEYBOARD_PATH_2)/post_rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_rules.mk)","")
include $(KEYBOARD_PATH_3)/post_rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_rules.mk)","")
include $(KEYBOARD_PATH_4)/post_rules.mk
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_rules.mk)","")
include $(KEYBOARD_PATH_5)/post_rules.mk
endif
move the info.json rules above userspace
2021-01-12 21:50:14 +01:00
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
CONFIG_H += $(KEYMAP_PATH)/config.h
endif
Add config.h and rules.mk support for data driven keymaps (#12859) * Add config.h and rules.mk support for data driven keymaps * tidy up after rebase * Rename key as it can contain more than just keyboard overrides * tidy up after rebase * Add validation
2021-08-18 22:52:41 +02:00
ifneq ("$(KEYMAP_H)","")
CONFIG_H += $(KEYMAP_H)
endif
move the info.json rules above userspace
2021-01-12 21:50:14 +01:00
QMK Userspace (#22222) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-11-27 21:53:43 +01:00
ifeq ($(KEYMAP_C),)
$(call CATASTROPHIC_ERROR,Invalid keymap,Could not find keymap)
endif
Add keymap wrappers for introspection into the keymap. (#17229) * Introspection handlers for keymaps. * Renaming.
2022-06-05 02:26:02 +02:00
OPT_DEFS += -DKEYMAP_C=\"$(KEYMAP_C)\"
Allow for `keymaps` array to be implemented in a file other than `$(KEYMAP_C)` (#17559)
2022-07-05 00:58:35 +02:00
# If a keymap or userspace places their keymap array in another file instead, allow for it to be included
# !!NOTE!! -- For this to work, the source file cannot be part of $(SRC), so users should not add it via `SRC += <file>`
ifneq ($(strip $(INTROSPECTION_KEYMAP_C)),)
OPT_DEFS += -DINTROSPECTION_KEYMAP_C=\"$(strip $(INTROSPECTION_KEYMAP_C))\"
endif
QMK CLI and JSON keymap support (#6176) * Script to generate keymap.c from JSON file. * Support for keymap.json * Add a warning about the keymap.c getting overwritten. * Fix keymap generating * Install the python deps * Flesh out more of the python environment * Remove defunct json2keymap * Style everything with yapf * Polish up python support * Hide json keymap.c into the .build dir * Polish up qmk-compile-json * Make milc work with positional arguments * Fix a couple small things * Fix some errors and make the CLI more understandable * Make the qmk wrapper more robust * Add basic QMK Doctor * Clean up docstrings and flesh them out as needed * remove unused compile_firmware() function
2019-07-15 21:14:27 +02:00
# project specific files
Begin to carve out platform/protocol API - Single main loop (#13843) * Begin to carve out platform/protocol API * Fix up after rebase
2021-08-18 01:11:07 +02:00
SRC += \
$(KEYBOARD_SRC) \
Add keymap wrappers for introspection into the keymap. (#17229) * Introspection handlers for keymaps. * Renaming.
2022-06-05 02:26:02 +02:00
$(QUANTUM_DIR)/keymap_introspection.c \
Begin to carve out platform/protocol API - Single main loop (#13843) * Begin to carve out platform/protocol API * Fix up after rebase
2021-08-18 01:11:07 +02:00
$(QUANTUM_SRC) \
$(QUANTUM_DIR)/main.c \
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(KEYMAP_PATH)
Change VPATH path addition order (#5754) Specifically, to fix some edge cases, and keep the handling consistent, the userspace folder should not actually be added at the end. Ideally, it should be added after the keymap paths, but before the keyboard's path. This issue was discovered in #5484, and the fix created by mtei.
2019-05-02 17:01:58 +02:00
VPATH += $(USER_PATH)
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now
2017-10-14 23:32:19 +02:00
VPATH += $(KEYBOARD_PATHS)
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
VPATH += $(COMMON_VPATH)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
VPATH += $(INTERMEDIATE_OUTPUT)/src
Parsing of makefile variables from starting dir
2016-08-01 08:23:37 +02:00
Migrate more makefile utilities to builddefs sub-directory (#16002)
2022-02-10 18:45:51 +01:00
include $(BUILDDEFS_PATH)/common_features.mk
Migrate makefile utilities to sub-directory (#14917)
2021-10-28 02:07:53 +02:00
include $(BUILDDEFS_PATH)/generic_features.mk
Added protocol.mk to build
2016-11-25 08:15:12 +01:00
include $(TMK_PATH)/protocol.mk
Move tmk_core/common/<plat> (#13918)
2021-11-19 19:41:02 +01:00
include $(PLATFORM_PATH)/common.mk
Split common.mk into common.mk and common_features.mk To support including keyboard/keymap specific rules before it
2017-06-16 21:14:47 +02:00
Fix LIB_SRC insert position (#5731) The insertion point for `$(patsubst %.c,%.clib,$(LIB_SRC))` must be after all normal `SRC += ..` . I modified it to be so. Because LIB_SRC and SRC are assumed to be used in pairs. Similarly, QUANTUM_LIB_SRC and QUANTUM_SRC are assumed to be used in pairs.
2019-05-03 15:20:23 +02:00
SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522) * add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-15 06:31:56 +01:00
SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
More common settings for unit tests and keyboards
2016-08-27 12:43:12 +02:00
Move bootloader.mk to platforms (#18228)
2022-08-31 16:17:24 +02:00
-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/bootloader.mk
Move tmk_core/common/<plat> (#13918)
2021-11-19 19:41:02 +01:00
include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk
-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk
Align some ChibiOS build logic (#8461) * Align some ChibiOS build logic * infer more makefile logic * Move bootloader logic to chibios file
2020-03-22 10:48:17 +01:00
ifneq ($(strip $(PROTOCOL)),)
Move protocol makefiles into their respective folders (#21332) * Move protocol makefiles into their respective folders * Fix USB-USB converter
2023-06-22 16:07:28 +02:00
PROTOCOL_KEY = $(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]'))
Got ps2avrGB to work with the V-USB protocol
2017-01-21 18:30:06 +01:00
else
Move protocol makefiles into their respective folders (#21332) * Move protocol makefiles into their respective folders * Fix USB-USB converter
2023-06-22 16:07:28 +02:00
PROTOCOL_KEY = $(PLATFORM_KEY)
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 21:07:52 +02:00
endif
Move protocol makefiles into their respective folders (#21332) * Move protocol makefiles into their respective folders * Fix USB-USB converter
2023-06-22 16:07:28 +02:00
include $(TMK_PATH)/protocol/$(PROTOCOL_KEY)/$(PROTOCOL_KEY).mk
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 21:07:52 +02:00
Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376)
2022-06-29 23:42:23 +02:00
# Setup definitions based on the selected MCU
$(eval $(call add_qmk_prefix_defs,MCU_ORIG,MCU))
$(eval $(call add_qmk_prefix_defs,MCU_ARCH,MCU_ARCH))
$(eval $(call add_qmk_prefix_defs,MCU_PORT_NAME,MCU_PORT_NAME))
$(eval $(call add_qmk_prefix_defs,MCU_FAMILY,MCU_FAMILY))
$(eval $(call add_qmk_prefix_defs,MCU_SERIES,MCU_SERIES))
$(eval $(call add_qmk_prefix_defs,BOARD,BOARD))
[QP] Add support for OLED, variable framebuffer bpp (#19997) Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com> Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Fixup delta frame coordinates after #20296.
2023-10-22 04:27:31 +02:00
$(eval $(call add_qmk_prefix_defs,OPT,OPT))
Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376)
2022-06-29 23:42:23 +02:00
Optionally keep intermediate file listings in order to do comparisons between builds. (#20237)
2023-03-23 02:48:25 +01:00
# Control whether intermediate file listings are generated
# e.g.:
# make handwired/onekey/blackpill_f411:default KEEP_INTERMEDIATES=yes
# cat .build/obj_handwired_onekey_blackpill_f411_default/quantum/quantum.i | sed -e 's@^#.*@@g' -e 's@^\s*//.*@@g' -e '/^\s*$/d' | clang-format
ifeq ($(strip $(KEEP_INTERMEDIATES)), yes)
OPT_DEFS += -save-temps=obj
endif
Align some ChibiOS build logic (#8461) * Align some ChibiOS build logic * infer more makefile logic * Move bootloader logic to chibios file
2020-03-22 10:48:17 +01:00
# TODO: remove this bodge?
PROJECT_DEFS := $(OPT_DEFS)
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
PROJECT_CONFIG := $(CONFIG_H)
Merge ChibiOS and LUFA descriptor support (#2362) * Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2018-02-08 21:07:46 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
CONFIG_H += $(POST_CONFIG_H)
QMK DFU bootloader generation (#2009) * adds :bootloader target * update planck and preonic revisions * remove references to .h files for planck * update preonic keymap * only add keyboard.h files that exist * add production target * hook things up with the new lufa variables * update rules for planck/preonic * back backlight key turn of status led when pressed * add manufacturer/product strings to bootloader
2017-11-14 22:11:29 +01:00
ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
Consolidate `KEYBOARD_OUTPUT`+`KEYMAP_OUTPUT`=>`INTERMEDIATE_OUTPUT` (#21272)
2023-06-21 00:41:49 +02:00
OUTPUTS := $(INTERMEDIATE_OUTPUT)
$(INTERMEDIATE_OUTPUT)_SRC := $(SRC) $(PLATFORM_SRC)
$(INTERMEDIATE_OUTPUT)_DEFS := $(OPT_DEFS) \
-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h\" \
-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
$(PROJECT_DEFS)
$(INTERMEDIATE_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) $(PROJECT_INC)
$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(PROJECT_CONFIG)
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
Rules for compiling and linking google test
2016-08-22 08:16:08 +02:00
# Default target.
Updates bootloader settings, adds file size check (#2029) * pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-11-28 05:08:21 +01:00
all: build check-size
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 21:02:18 +01:00
Fix up build dependencies. (#11435)
2021-01-04 21:36:02 +01:00
build: elf cpfirmware
Fix file size check for parallel make (#5012)
2019-01-31 03:20:13 +01:00
check-size: build
Add target 'check-md5' to `build_keyboard.mk` (#11338) * Add target 'build-for-compare' to `build_keyboard.mk` The `build-for-compare` target provides an easy way to check the md5 checksum of the generated binary. You can easily see if there is any change in the generated binaries between the two versions, as in the example below. ``` $ git checkout 0.11.0 M build_keyboard.mk M tmk_core/rules.mk Note: checking out '0.11.0'. HEAD is now at c66df1664 2020 November 28 Breaking Changes Update (#11053) $ make helix:all:build-for-compare | grep ^MD5 MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6 MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934 MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791 MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6 MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d MD5 (.build/helix_rev2_xulkal.hex) = 01f603dc46bcf9094d7e106831d8f5b1 MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba $ git checkout 0.11.1 M build_keyboard.mk M tmk_core/rules.mk Previous HEAD position was c66df1664 2020 November 28 Breaking Changes Update (#11053) HEAD is now at cc08e3082 nix-shell: add milc dependency (#11086) $ make helix:all:build-for-compare | grep ^MD5 MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6 MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934 MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791 MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6 MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d MD5 (.build/helix_rev2_xulkal.hex) = d848383adfd7463b138c6da179cf1436 MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba ``` * make builds reproducable by default * update build_keyboard.mk: remove 'build-for-compare' target * GNU make (3.81) on macOS 10.14(Mojave) does not have the 'undefine' directive. * Adopted fauxpark's suggestion. * Update tmk_core/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * update tmk_core/rules.mk * fix tmk_core/rules.mk Co-authored-by: Zach White <skullydazed@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-31 07:20:56 +01:00
check-md5: build
add 'objs-size' target into tmk_core/avr.mk (#5490)
2019-07-16 07:45:31 +02:00
objs-size: build
More general system for generating several outputs
2016-08-15 07:20:16 +02:00
Allow for specifying the number of symbols to output. (#19497)
2023-01-04 06:07:13 +01:00
ifneq ($(strip $(TOP_SYMBOLS)),)
Dump out the largest symbols in flash and in RAM. (#17397)
2022-06-16 01:55:15 +02:00
ifeq ($(strip $(TOP_SYMBOLS)),yes)
Allow for specifying the number of symbols to output. (#19497)
2023-01-04 06:07:13 +01:00
NUM_TOP_SYMBOLS := 10
else
NUM_TOP_SYMBOLS := $(strip $(TOP_SYMBOLS))
endif
Dump out the largest symbols in flash and in RAM. (#17397)
2022-06-16 01:55:15 +02:00
all: top-symbols
check-size: top-symbols
top-symbols: build
echo "###########################################"
echo "# Highest flash usage:"
Fixup symbol sizing listing. (#22307)
2023-10-21 12:31:23 +02:00
$(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep ' [RrTt] ' | head -n$(NUM_TOP_SYMBOLS) | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
Dump out the largest symbols in flash and in RAM. (#17397)
2022-06-16 01:55:15 +02:00
echo "###########################################"
echo "# Highest RAM usage:"
Fixup symbol sizing listing. (#22307)
2023-10-21 12:31:23 +02:00
$(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep ' [BbCDdGgSs] ' | head -n$(NUM_TOP_SYMBOLS) | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
Dump out the largest symbols in flash and in RAM. (#17397)
2022-06-16 01:55:15 +02:00
echo "###########################################"
endif
Migrate makefile utilities to sub-directory (#14917)
2021-10-28 02:07:53 +02:00
include $(BUILDDEFS_PATH)/show_options.mk
Migrate more makefile utilities to builddefs sub-directory (#16002)
2022-02-10 18:45:51 +01:00
include $(BUILDDEFS_PATH)/common_rules.mk
Fix up build dependencies. (#11435)
2021-01-04 21:36:02 +01:00
# Ensure we have generated files available for each of the objects
define GEN_FILES
$1: generated-files
endef
$(foreach O,$(OBJ),$(eval $(call GEN_FILES,$(patsubst %.a,%.o,$(O)))))
Reference in New Issue Copy Permalink