qmk-keychron-q3-colemak-dh/keyboards/splitkb/kyria/rev2/config.h

/*
Copyright 2022 Thomas Baart <thomas@splitkb.com>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

// Side detection
// col 4 row 3 on right-hand-side
#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row
#define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c`

/*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */

#if defined(CONVERT_TO_PROTON_C)
#    define SERIAL_USART_FULL_DUPLEX      // Enable full duplex operation mode.
#    define SERIAL_USART_PIN_SWAP         // Swap TX and RX pins if keyboard is master halve.
#    define SERIAL_USART_DRIVER      SD1  // USART driver of TX pin. default: SD1
#    define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#    define SERIAL_USART_TX_PIN      D3
#    define SERIAL_USART_RX_PIN      D2

#    define WS2812_DI_PIN            PAL_LINE(GPIOA, 3)
#    define WS2812_PWM_DRIVER        PWMD2                  // default: PWMD2
#    define WS2812_PWM_CHANNEL       4                      // default: 2
#    define WS2812_PWM_PAL_MODE      1                      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
#    define WS2812_DMA_STREAM        STM32_DMA1_STREAM2     // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#    define WS2812_DMA_CHANNEL       2                      // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#    define WS2812_DMAMUX_ID         STM32_DMAMUX1_TIM2_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
#else
#    define WS2812_DI_PIN D3
#    define SOFT_SERIAL_PIN D2
#endif

#ifdef OLED_ENABLE
#    define OLED_DISPLAY_128X64
#    define SPLIT_OLED_ENABLE
#endif
[Keyboard] Add Kyria rev. 2 (#16178) 2022-02-21 07:33:00 +01:00			`/*`
			`Copyright 2022 Thomas Baart <thomas@splitkb.com>`

			`This program is free software: you can redistribute it and/or modify`
			`it under the terms of the GNU General Public License as published by`
			`the Free Software Foundation, either version 2 of the License, or`
			`(at your option) any later version.`

			`This program is distributed in the hope that it will be useful,`
			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`GNU General Public License for more details.`

			`You should have received a copy of the GNU General Public License`
			`along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

			`#pragma once`

			`// Side detection`
			`// col 4 row 3 on right-hand-side`
			`#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row`
			#define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c`

			`/*`
			`* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.`
			`*/`

			`#if defined(CONVERT_TO_PROTON_C)`
			`# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.`
			`# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.`
			`# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1`
			`# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7`
			`# define SERIAL_USART_TX_PIN D3`
			`# define SERIAL_USART_RX_PIN D2`

Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 10:00:54 +02:00			`# define WS2812_DI_PIN PAL_LINE(GPIOA, 3)`
[Keyboard] Add Kyria rev. 2 (#16178) 2022-02-21 07:33:00 +01:00			`# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2`
			`# define WS2812_PWM_CHANNEL 4 // default: 2`
			`# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2`
			`# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.`
			`# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.`
			`# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.`
			`#else`
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 10:00:54 +02:00			`# define WS2812_DI_PIN D3`
[Keyboard] Add Kyria rev. 2 (#16178) 2022-02-21 07:33:00 +01:00			`# define SOFT_SERIAL_PIN D2`
			`#endif`

			`#ifdef OLED_ENABLE`
			`# define OLED_DISPLAY_128X64`
			`# define SPLIT_OLED_ENABLE`
			`#endif`