30 lines
1.3 KiB
Markdown
30 lines
1.3 KiB
Markdown
|
# Ishi 80 Mk 0
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Ishi 80 is a 60% keyboard with a SouthPaw, Mirrored Numpad.
|
||
|
|
|
||
|
|
Note: This firmware is for ATMega32U4 based daughterboards with the standard Pro-Micro footprint. It does not support the Encoder and OLED display functionality.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Jason Devadoss](https://github.com/jasonj2232)
|
||
|
|
* Hardware Supported: Ishi80 Mk 0 with standard Pro Micro footprint daughterboards
|
||
|
|
* Hardware Availability: -
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make argo_works/ishi/80/mk0_avr:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make argo_works/ishi/80/mk0_avr:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|