qmk-keychron-q3-colemak-dh/keyboards/handwired/3dortho14u/readme.md

# 3dortho14u

![3dortho14u](https://i.imgur.com/us16LYTh.jpg)

A symmetrical 14u wide ortholinear keyboard.

In addition to the 3d printed parts and microcontroller, the following hardware is required:
* 8 * 12 mm M3 bolt
* Either:
  * 8 * M3 muts and CA glue
    OR
  * 8 * 3x3 mm threaded insert
* Optional:
  * USB daughter board

---

* Keyboard Maintainer: [xia0](https://github.com/xia0)
* Hardware Supported:
  * rev1: Teensy 2.0 (ATmega32u4)
  * rev2: Arduino Pro Micro (ATmega32u4)
* Hardware Availability: [github](https://github.com/xia0/keeb_files/tree/main/3dortho14u)

Make example for this keyboard (after setting up your build environment):

    make 3dortho14u/rev1:default

Flashing example for this keyboard:

    make 3dortho14u/rev1:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
[Keyboard] Add keyboard 3dortho14u (#16329) Co-authored-by: xia0 <xiao@morgan.net.au> 2022-02-21 20:22:25 +01:00			`# 3dortho14u`

			`![3dortho14u](https://i.imgur.com/us16LYTh.jpg)`

			`A symmetrical 14u wide ortholinear keyboard.`

			`In addition to the 3d printed parts and microcontroller, the following hardware is required:`
			`* 8 * 12 mm M3 bolt`
			`* Either:`
			`* 8 * M3 muts and CA glue`
			`OR`
			`* 8 * 3x3 mm threaded insert`
			`* Optional:`
			`* USB daughter board`

			`---`

			`* Keyboard Maintainer: [xia0](https://github.com/xia0)`
			`* Hardware Supported:`
			`* rev1: Teensy 2.0 (ATmega32u4)`
			`* rev2: Arduino Pro Micro (ATmega32u4)`
			`* Hardware Availability: [github](https://github.com/xia0/keeb_files/tree/main/3dortho14u)`

			`Make example for this keyboard (after setting up your build environment):`

			`make 3dortho14u/rev1:default`

			`Flashing example for this keyboard:`

			`make 3dortho14u/rev1:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 12:34:17 +02:00			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available