qmk-keychron-q3-colemak-dh/keyboards/ergodone/config.h

#ifndef ERGODOX_ERGODONE_CONFIG_H
#define ERGODOX_ERGODONE_CONFIG_H

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0x1209  
#define PRODUCT_ID      0x2328  
// The official ErgoDone VID and PID are documented at http://pid.codes/1209/2328/.
#define DEVICE_VER      0x0001
#define MANUFACTURER    K.T.E.C.
#define PRODUCT         ErgoDone

/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 14

#define MOUSEKEY_INTERVAL       20
#define MOUSEKEY_DELAY          0
#define MOUSEKEY_TIME_TO_MAX    60
#define MOUSEKEY_MAX_SPEED      7
#define MOUSEKEY_WHEEL_DELAY 0

#define TAPPING_TOGGLE  1

/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST

#define TAPPING_TERM    200
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* key combination for command */
#define IS_COMMAND() ( \
    get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
    get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)

/* number of backlight levels */
#define BACKLIGHT_LEVELS 3

#define LED_BRIGHTNESS_LO       15
#define LED_BRIGHTNESS_HI       255

/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER

/* Set 0 if debouncing isn't needed */
#define DEBOUNCE    5

#define USB_MAX_POWER_CONSUMPTION 500

/* NKRO */
#ifndef FORCE_NKRO
    #define FORCE_NKRO  // Depends on NKRO_ENABLE.
#endif

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
// #define NO_DEBUG

/* disable print */
// #define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//#define DEBUG_MATRIX_SCAN_RATE

#endif
Add support for the ErgoDone 2017-08-12 16:05:05 +02:00			`#ifndef ERGODOX_ERGODONE_CONFIG_H`
			`#define ERGODOX_ERGODONE_CONFIG_H`

			`#include "config_common.h"`

			`/* USB Device descriptor parameter */`
Ergodone via support (#11618) Co-authored-by: Erovia <Erovia@users.noreply.github.com> 2021-04-16 16:26:19 +02:00			`#define VENDOR_ID 0x1209`
			`#define PRODUCT_ID 0x2328`
ErgoDone: VID/PID/NKRO (#1872) * - Fancy default PID and option for corresponding VID. - Information about official VID/PID. - Correct manufacturer name. - NKRO enabled by default. * Resolved build error with `#ifndef FORCE_NKRO`. 2017-10-21 22:00:41 +02:00			`// The official ErgoDone VID and PID are documented at http://pid.codes/1209/2328/.`
Add support for the ErgoDone 2017-08-12 16:05:05 +02:00			`#define DEVICE_VER 0x0001`
ErgoDone: VID/PID/NKRO (#1872) * - Fancy default PID and option for corresponding VID. - Information about official VID/PID. - Correct manufacturer name. - NKRO enabled by default. * Resolved build error with `#ifndef FORCE_NKRO`. 2017-10-21 22:00:41 +02:00			`#define MANUFACTURER K.T.E.C.`
Add support for the ErgoDone 2017-08-12 16:05:05 +02:00			`#define PRODUCT ErgoDone`

			`/* key matrix size */`
			`#define MATRIX_ROWS 6`
			`#define MATRIX_COLS 14`

Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches 2017-08-24 04:29:07 +02:00			`#define MOUSEKEY_INTERVAL 20`
			`#define MOUSEKEY_DELAY 0`
			`#define MOUSEKEY_TIME_TO_MAX 60`
			`#define MOUSEKEY_MAX_SPEED 7`
			`#define MOUSEKEY_WHEEL_DELAY 0`

			`#define TAPPING_TOGGLE 1`

			`/* define if matrix has ghost */`
			`//#define MATRIX_HAS_GHOST`

			`#define TAPPING_TERM 200`
			`#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)`

			`/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */`
			`#define LOCKING_SUPPORT_ENABLE`
			`/* Locking resynchronize hack */`
			`#define LOCKING_RESYNC_ENABLE`

			`/* key combination for command */`
			`#define IS_COMMAND() ( \`
Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) * Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt) 2019-01-27 09:28:40 +01:00			`get_mods() == (MOD_BIT(KC_LCTL) \| MOD_BIT(KC_RCTL)) \|\| \`
			`get_mods() == (MOD_BIT(KC_LSFT) \| MOD_BIT(KC_RSFT)) \`
Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches 2017-08-24 04:29:07 +02:00			`)`

Add dummy backlight/LED functions for keymaps that require them 2017-08-12 17:15:24 +02:00			`/* number of backlight levels */`
			`#define BACKLIGHT_LEVELS 3`

			`#define LED_BRIGHTNESS_LO 15`
			`#define LED_BRIGHTNESS_HI 255`

Add support for the ErgoDone 2017-08-12 16:05:05 +02:00			`/* fix space cadet rollover issue */`
			`#define DISABLE_SPACE_CADET_ROLLOVER`

			`/* Set 0 if debouncing isn't needed */`
			`#define DEBOUNCE 5`

			`#define USB_MAX_POWER_CONSUMPTION 500`

ErgoDone: VID/PID/NKRO (#1872) * - Fancy default PID and option for corresponding VID. - Information about official VID/PID. - Correct manufacturer name. - NKRO enabled by default. * Resolved build error with `#ifndef FORCE_NKRO`. 2017-10-21 22:00:41 +02:00			`/* NKRO */`
			`#ifndef FORCE_NKRO`
			`#define FORCE_NKRO // Depends on NKRO_ENABLE.`
			`#endif`

Add support for the ErgoDone 2017-08-12 16:05:05 +02:00			`/*`
			`* Feature disable options`
			`* These options are also useful to firmware size reduction.`
			`*/`

			`/* disable debug print */`
			`// #define NO_DEBUG`

			`/* disable print */`
			`// #define NO_PRINT`

			`/* disable action features */`
			`//#define NO_ACTION_LAYER`
			`//#define NO_ACTION_TAPPING`
			`//#define NO_ACTION_ONESHOT`
			`//#define NO_ACTION_MACRO`
			`//#define NO_ACTION_FUNCTION`
			`//#define DEBUG_MATRIX_SCAN_RATE`

			`#endif`