qmk-keychron-q3-colemak-dh/keyboards/fjlabs/solanis/readme.md

# Solanis H87C/H88C Replacement PCBs by FJLaboratories

The following is the QMK Firmware for the Solanis by [FJLaboratories](https://www.fjlaboratories.com/).

* Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)
* Hardware Supported: Solanis

Make example for this keyboard (after setting up your build environment):

    make fjlabs/solanis:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 

## Bootloader

You can enter the bootloader by shorting the RST pads on the back of the PCB while the PCB is plugged into the computer.
[Keyboard] Solanis H87C/H88C Compatible Replacement PCBs (#16942) Co-authored-by: Ryan <fauxpark@gmail.com> 2022-04-29 09:06:49 +02:00			`# Solanis H87C/H88C Replacement PCBs by FJLaboratories`

			`The following is the QMK Firmware for the Solanis by [FJLaboratories](https://www.fjlaboratories.com/).`
FJLabs Solanis Layout Macro Additions (#20639) * add matrix_diagram.md * info.json: apply friendly formatting * add LAYOUT_tkl_f13_ansi_split_bs_rshift * add LAYOUT_tkl_f13_ansi * add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift * add LAYOUT_tkl_f13_ansi_tsangan * add LAYOUT_tkl_ansi_split_bs_rshift * add LAYOUT_tkl_ansi * add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * add LAYOUT_tkl_ansi_tsangan * enable Community Layout support * edit listed maintainer (reference GitHub username) 2023-04-30 17:47:24 +02:00
			`* Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)`
[Keyboard] Solanis H87C/H88C Compatible Replacement PCBs (#16942) Co-authored-by: Ryan <fauxpark@gmail.com> 2022-04-29 09:06:49 +02:00			`* Hardware Supported: Solanis`

			`Make example for this keyboard (after setting up your build environment):`

			`make fjlabs/solanis:default`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`You can enter the bootloader by shorting the RST pads on the back of the PCB while the PCB is plugged into the computer.`