qmk-keychron-q3-colemak-dh/keyboards/evyd13/atom47/rev2/readme.md

# Atom47 rev2

This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.

## Support
Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)  
Hardware Supported: Atom47 rev2  
Hardware Availability: None  


## Features
- QMK Firmware  
- In-switch leds  
- Through-hole micro usb connector (less likely to break off!)  
- Easily reachable reset button under the spacebar  
- In-switch CapsLock indicator  

## Build
To build the default keymap, simply run `make atom47/rev2:default`.

For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.

See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap 2018-04-06 01:16:35 +02:00			`# Atom47 rev2`

			`This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.`

			`## Support`
QMK Configurator updates for Alpha 28-key, AMJ40 and AMJ Pad (#2873) * QMK Configurator update for Alpha 28-key * QMK Configurator update for AMJ40 * QMK Configurator update for AMJ Pad * QMK Configurator update for Atom47 * QMK Configurator update for OLKB Atomic 2018-05-02 17:02:35 +02:00			`Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)`
Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap 2018-04-06 01:16:35 +02:00			`Hardware Supported: Atom47 rev2`
			`Hardware Availability: None`


			`## Features`
			`- QMK Firmware`
			`- In-switch leds`
			`- Through-hole micro usb connector (less likely to break off!)`
			`- Easily reachable reset button under the spacebar`
			`- In-switch CapsLock indicator`

			`## Build`
			To build the default keymap, simply run `make atom47/rev2:default`.

			For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.

Modified URLs to point to new locations 2019-01-13 01:51:21 +01:00			`See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.`