qmk-keychron-q3-colemak-dh/keyboards/gray_studio/aero75/readme.md

# Gray Studio Aero 75

![Gray Studio Aero 75](https://graystudio.site/wp-content/uploads/2022/09/aero75-png-1024x442.png)

A 75% keyboard featuring an anodized aluminum case around a gasket-mounted, flex-cut PCB.

* Keyboard Maintainer: [edwardslau](https://github.com/edwardslau)
* Hardware Supported: Aero 75 Hotswap (STM32F103)
  * Aero 75 Soldered version is **not currently supported**.
* Hardware Availability: [GrayStudio](https://graystudio.site/en/aero75/)

Make example for this keyboard (after setting up your build environment):

    make gray_studio/aero75:default

Flashing example for this keyboard:

    make gray_studio/aero75:default:flash

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the top-left key (Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (top-right on the Function layer by default)

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] GrayStudio Aero75 Hotswap (#18883) Co-authored-by: Drashna Jaelre <drashna@live.com> 2022-11-19 22:51:59 +01:00			`# Gray Studio Aero 75`
GrayStudio Aero 75 Refactor and Touch-Up (#20640) * add matrix_diagram.md * info.json: apply friendly formatting * rename LAYOUT_all to LAYOUT_ansi_blocker Existing codebase only supports the Hotswap version, but there is a Soldered version that supports additional layouts. * refactor keymaps - use four-space indent - update grid-alignment of keycodes - remove trailing spaces * flesh-out keyboard readme 2023-04-30 22:50:18 +02:00
			`![Gray Studio Aero 75](https://graystudio.site/wp-content/uploads/2022/09/aero75-png-1024x442.png)`

			`A 75% keyboard featuring an anodized aluminum case around a gasket-mounted, flex-cut PCB.`

			`* Keyboard Maintainer: [edwardslau](https://github.com/edwardslau)`
			`* Hardware Supported: Aero 75 Hotswap (STM32F103)`
			`* Aero 75 Soldered version is not currently supported.`
			`* Hardware Availability: [GrayStudio](https://graystudio.site/en/aero75/)`

			`Make example for this keyboard (after setting up your build environment):`

			`make gray_studio/aero75:default`

			`Flashing example for this keyboard:`

			`make gray_studio/aero75:default:flash`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the top-left key (Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available (top-right on the Function layer by default)

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`