keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d14573620d
qmk-keychron-q3-colemak-dh/keyboards/donutcables/budget96/readme.md

46 lines
1.7 KiB
Markdown
Raw Normal View History

[Keyboard] Add Budget96 by Donut Cables (#5550) * initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not needed
2019-04-04 23:25:35 +02:00
# budget96
96 key atmega32a keyboard.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: Budget96 PCB
Hardware Availability: [DonutCables](https://donutcables.com/)
Make example for this keyboard (after setting up your build environment):
make donutcables/budget96:default
Flashing
[Keyboard] Refactor budget96 to remove custom i2c code in favor of QMK i2c_master (#5571) * remove custom i2c code in favor of QMK i2c_master * fix readme * disable bootmagic as it doesn't work on bmc boards
2019-04-07 16:34:01 +02:00
**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard.
[Keyboard] Add Budget96 by Donut Cables (#5550) * initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not needed
2019-04-04 23:25:35 +02:00
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset.
3. Press the `Find Device` button and ensure that your keyboard is found.
4. Press the `Open .hex File` button and locate the `.hex` file you created.
5. Press the `Flash Device` button and wait for the process to complete.
macOS:
1. Install homebrew by typing the following:
```
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
```
2. Install `crosspack-avr`.
```
brew cask install crosspack-avr
```
3. Install the following packages:
```
[Keyboard] Refactor budget96 to remove custom i2c code in favor of QMK i2c_master (#5571) * remove custom i2c code in favor of QMK i2c_master * fix readme * disable bootmagic as it doesn't work on bmc boards
2019-04-07 16:34:01 +02:00
brew install python3
[Keyboard] Add Budget96 by Donut Cables (#5550) * initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not needed
2019-04-04 23:25:35 +02:00
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
Budget96 Production PCB Fix (#6900) * production version of the PCB has the top two right most keys swapped around. There are only 6 protos in existence and one of them is mine so we can just do this. * update readme by adding backticks
2019-10-05 19:19:49 +02:00
```
[Keyboard] Add Budget96 by Donut Cables (#5550) * initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not needed
2019-04-04 23:25:35 +02:00
4. Place your keyboard into reset.
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Reference in New Issue Copy Permalink