2019-11-04 00:43:26 +01:00
/*
2022-02-21 07:33:00 +01:00
Copyright 2022 Thomas Baart < thomas @ splitkb . com >
2019-11-04 00:43:26 +01:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# pragma once
/* key matrix size */
/* Rows are doubled up */
2021-07-26 03:18:39 +02:00
# define MATRIX_ROWS 8
# define MATRIX_COLS 8
2019-11-04 00:43:26 +01:00
// wiring
2021-07-26 03:18:39 +02:00
# define MATRIX_ROW_PINS \
{ B4 , E6 , D7 , D4 }
# define MATRIX_COL_PINS \
{ B6 , B2 , B3 , B1 , F7 , F6 , F5 , F4 }
2019-11-04 00:43:26 +01:00
2021-07-26 03:18:39 +02:00
# define ENCODERS_PAD_A \
{ C6 }
# define ENCODERS_PAD_B \
{ B5 }
# define ENCODERS_PAD_A_RIGHT \
{ B5 }
# define ENCODERS_PAD_B_RIGHT \
{ C6 }
2019-11-04 00:43:26 +01:00
/* COL2ROW, ROW2COL*/
# define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
2021-07-26 03:18:39 +02:00
# define DEBOUNCE 5
2019-11-04 00:43:26 +01:00
/*
* Split Keyboard specific options , make sure you have ' SPLIT_KEYBOARD = yes ' in your rules . mk , and define SOFT_SERIAL_PIN .
*/
2021-10-02 04:11:34 +02:00
# if defined(CONVERT_TO_PROTON_C)
# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
# define SERIAL_USART_TX_PIN D3
# define SERIAL_USART_RX_PIN D2
# define RGB_DI_PIN PAL_LINE(GPIOA, 3)
# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
# define WS2812_PWM_CHANNEL 4 // default: 2
# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
# else
# define RGB_DI_PIN D3
# define SOFT_SERIAL_PIN D2
# endif
2021-07-26 03:18:39 +02:00
# define RGBLED_SPLIT \
{ 10 , 10 }
2019-11-04 00:43:26 +01:00
# define RGBLED_NUM 20
2021-08-24 08:28:26 +02:00
# ifdef OLED_ENABLE
2021-07-26 03:18:39 +02:00
# define OLED_DISPLAY_128X64
2021-08-15 09:54:08 +02:00
# define SPLIT_OLED_ENABLE
2021-07-26 03:18:39 +02:00
# endif
2021-07-27 04:42:34 +02:00
/* RGB matrix support */
# ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
# define DRIVER_LED_TOTAL RGBLED_NUM // Number of LEDs
# define RGB_MATRIX_SPLIT { 10, 10 }
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
# define RGB_DISABLE_WHEN_USB_SUSPENDED
# endif
