qmk-keychron-q3-colemak-dh/keyboards/kprepublic/bm68rgb/readme.md

# bm68rgb

![bm68rgb](https://i.imgur.com/uuYP8OIl.jpeg)

A 65% hotswap in switch RGB keyboard from KPRepublic.

* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
* Hardware Supported: BM68 RGB
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm68rgb-bm68-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)

Make example for this keyboard (after setting up your build environment):

    make kprepublic/bm68rgb:default

Flashing example for this keyboard:

    make kprepublic/bm68rgb:default:flash

To reset the board into bootloader mode, do one of the following:

* Short the two-pad footprint to the left of the spacebar switch while the board is plugged in
* Hold the Esc key while connecting the USB cable (also erases persistent settings)

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] bm68rgb (#12128) * add support for Bbm68rgb * pull request changes filled * pull request changes filled(this time for real) * added new line to files that did not have new lines at end of file * updated modifier keys for rgb effects * Update keyboards/bm68rgb/readme.md * Apply suggestions from code review * Apply suggestions from code review * add nkro suppport * Update keyboards/bm68rgb/rules.mk * modified keymap to better correspond to physical layout * updated comment style 2021-03-07 00:13:20 +01:00			`# bm68rgb`

			`![bm68rgb](https://i.imgur.com/uuYP8OIl.jpeg)`

			`A 65% hotswap in switch RGB keyboard from KPRepublic.`

			`* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)`
			`* Hardware Supported: BM68 RGB`
			`* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm68rgb-bm68-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)`

			`Make example for this keyboard (after setting up your build environment):`

Update readme files (#14172) 2021-08-26 17:53:24 +02:00			`make kprepublic/bm68rgb:default`
[Keyboard] bm68rgb (#12128) * add support for Bbm68rgb * pull request changes filled * pull request changes filled(this time for real) * added new line to files that did not have new lines at end of file * updated modifier keys for rgb effects * Update keyboards/bm68rgb/readme.md * Apply suggestions from code review * Apply suggestions from code review * add nkro suppport * Update keyboards/bm68rgb/rules.mk * modified keymap to better correspond to physical layout * updated comment style 2021-03-07 00:13:20 +01:00
			`Flashing example for this keyboard:`

Update readme files (#14172) 2021-08-26 17:53:24 +02:00			`make kprepublic/bm68rgb:default:flash`
[Keyboard] bm68rgb (#12128) * add support for Bbm68rgb * pull request changes filled * pull request changes filled(this time for real) * added new line to files that did not have new lines at end of file * updated modifier keys for rgb effects * Update keyboards/bm68rgb/readme.md * Apply suggestions from code review * Apply suggestions from code review * add nkro suppport * Update keyboards/bm68rgb/rules.mk * modified keymap to better correspond to physical layout * updated comment style 2021-03-07 00:13:20 +01:00
			`To reset the board into bootloader mode, do one of the following:`

			`* Short the two-pad footprint to the left of the spacebar switch while the board is plugged in`
			`* Hold the Esc key while connecting the USB cable (also erases persistent settings)`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`