hhkb: Integrate RN-42 support, remove hhkb_rn42
This commit is contained in:
tmk
parent
ce66988650
commit
099701dd31
@ -1,141 +0,0 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hhkb_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap_common.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymap_hasu.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
# PJRC Teensy++ 2.0
|
||||
#MCU = at90usb1286
|
||||
# TMK Alt Controller or PJRC Teensy 2.0
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task
|
||||
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096 (TMK Alt Controller)
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
||||
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
|
||||
debug-on: all
|
||||
|
||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
|
||||
debug-off: all
|
||||
@ -39,7 +39,7 @@
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hhkb_lufa
|
||||
TARGET = hhkb_rn42
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
@ -53,13 +53,10 @@ SRC += keymap_common.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
CONFIG_H = config_rn42.h
|
||||
|
||||
|
||||
# MCU name
|
||||
# PJRC Teensy++ 2.0
|
||||
#MCU = at90usb1286
|
||||
# TMK Alt Controller or PJRC Teensy 2.0
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
@ -121,11 +118,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#HHKB_JP = yes # HHKB JP support
|
||||
|
||||
|
||||
ifdef HHKB_JP
|
||||
OPT_DEFS += -DHHKB_JP
|
||||
endif
|
||||
|
||||
|
||||
#
|
||||
# Keymap file
|
||||
#
|
||||
@ -134,12 +126,17 @@ ifdef KEYMAP
|
||||
else
|
||||
ifdef HHKB_JP
|
||||
SRC := keymap_jp.c $(SRC)
|
||||
else
|
||||
SRC := keymap_hasu.c $(SRC)
|
||||
else
|
||||
SRC := keymap_hhkb.c $(SRC)
|
||||
endif
|
||||
endif
|
||||
|
||||
|
||||
ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
|
||||
OPT_DEFS += -DHHKB_JP
|
||||
endif
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
@ -154,4 +151,5 @@ debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
|
||||
debug-on: all
|
||||
|
||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
|
||||
debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
|
||||
debug-off: all
|
||||
@ -10,11 +10,17 @@ See [this thread][AltController] in geekhack.org.
|
||||
[AltController]: http://geekhack.org/index.php?topic=12047.0
|
||||
|
||||
|
||||
## Update
|
||||
* Bluetooth module RN-42 is supported.(2015/01)
|
||||
* V-USB and iWRAP are no longer supported now, but still it'll works with a little fix. See not_supported directory.(2015/01)
|
||||
|
||||
|
||||
##Features
|
||||
* Customizable keymap
|
||||
* More keymap layers(more Fn keys)
|
||||
* Mouse keys
|
||||
* USB NKRO
|
||||
* Bluetooth(RN-42)
|
||||
|
||||
See README of [tmk_keyboard] for more.
|
||||
|
||||
@ -50,8 +56,9 @@ If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER
|
||||
### Build
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:
|
||||
|
||||
$ make KEYMAP=[hasu|hhkb|spacefn|<name>]
|
||||
$ make -f Makefile.jp KEYMAP=[jp|<name>] # for HHKB JP
|
||||
$ make -f Makefile.<jp|pjrc|rn42> KEYMAP=(hasu|hhkb|spacefn|<name>)
|
||||
|
||||
You can omit `-f` option when you use `Makefile`. `Makefile` is used for **Pro2 and Pro**, `Makefile.jp` fits for **JP** model and `Makefile.rn42` supports Bluetooth module **RN-42**. `Makefile.pjrc` uses **PJRC** as output protocol instead of **LUFA**.
|
||||
|
||||
|
||||
### Program
|
||||
@ -59,13 +66,11 @@ First, push reset button on board to start bootloader.
|
||||
|
||||
This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.
|
||||
|
||||
$ make dfu
|
||||
$ make -f Makefile.jp dfu # for HHKB JP
|
||||
$ make -f Makefile.<variant> KEYMAP=<name> dfu
|
||||
|
||||
Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.
|
||||
|
||||
$ make flip
|
||||
$ make -f Makefile.jp flip # for HHKB JP
|
||||
$ make -f Makefile.<variant> KEYMAP=<name> flip
|
||||
|
||||
Use [Teensy Loader] if your controller is Teensy/Teensy++.
|
||||
|
||||
|
||||
@ -41,17 +41,32 @@ static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
|
||||
static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
|
||||
static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
|
||||
static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
|
||||
#ifdef HHKB_POWER_SAVING
|
||||
static inline void KEY_POWER_ON(void) {
|
||||
DDRB = 0xFF; PORTB = 0x40; // change pins output
|
||||
DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
|
||||
/* Without this wait you will miss or get false key events. */
|
||||
_delay_ms(5); // wait for powering up
|
||||
}
|
||||
static inline void KEY_POWER_OFF(void) {
|
||||
/* input with pull-up consumes less than without it when pin is open. */
|
||||
DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
|
||||
DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
|
||||
}
|
||||
static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); }
|
||||
#else
|
||||
static inline void KEY_POWER_ON(void) {}
|
||||
static inline void KEY_POWER_OFF(void) {}
|
||||
static inline bool KEY_POWER_STATE(void) { return true; }
|
||||
#endif
|
||||
static inline void KEY_INIT(void)
|
||||
{
|
||||
/* row,col,prev: output */
|
||||
DDRB = 0xFF;
|
||||
PORTB = 0x00;
|
||||
PORTB = 0x40; // unable
|
||||
/* key: input with pull-up */
|
||||
DDRD &= ~0x80;
|
||||
PORTD |= 0x80;
|
||||
/* keyswitch board power on */
|
||||
DDRD |= (1<<4);
|
||||
PORTD |= (1<<4);
|
||||
PORTD |= 0x80;
|
||||
#ifdef HHKB_JP
|
||||
/* row extention for HHKB JP */
|
||||
DDRC |= (1<<6|1<<7);
|
||||
@ -59,6 +74,8 @@ static inline void KEY_INIT(void)
|
||||
#endif
|
||||
KEY_UNABLE();
|
||||
KEY_PREV_OFF();
|
||||
|
||||
KEY_POWER_OFF();
|
||||
}
|
||||
static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
|
||||
{
|
||||
@ -98,6 +115,7 @@ static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
|
||||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
|
||||
#define KEY_POWER_ON()
|
||||
#define KEY_POWER_OFF()
|
||||
#define KEY_POWER_STATE() true
|
||||
|
||||
|
||||
#else
|
||||
|
||||
@ -27,8 +27,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include "timer.h"
|
||||
#include "matrix.h"
|
||||
#include "hhkb_avr.h"
|
||||
#include <avr/wdt.h>
|
||||
#include "suspend.h"
|
||||
#include "lufa.h"
|
||||
|
||||
|
||||
// matrix power saving
|
||||
#define MATRIX_POWER_SAVE 10000
|
||||
static uint32_t matrix_last_modified = 0;
|
||||
|
||||
// matrix state buffer(1:on, 0:off)
|
||||
static matrix_row_t *matrix;
|
||||
static matrix_row_t *matrix_prev;
|
||||
@ -72,7 +79,8 @@ uint8_t matrix_scan(void)
|
||||
matrix_prev = matrix;
|
||||
matrix = tmp;
|
||||
|
||||
KEY_POWER_ON();
|
||||
// power on
|
||||
if (!KEY_POWER_STATE()) KEY_POWER_ON();
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
|
||||
KEY_SELECT(row, col);
|
||||
@ -126,8 +134,16 @@ uint8_t matrix_scan(void)
|
||||
// This takes 25us or more to make sure KEY_STATE returns to idle state.
|
||||
_delay_us(75);
|
||||
}
|
||||
if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
|
||||
}
|
||||
// power off
|
||||
if (KEY_POWER_STATE() &&
|
||||
(USB_DeviceState == DEVICE_STATE_Suspended ||
|
||||
USB_DeviceState == DEVICE_STATE_Unattached ) &&
|
||||
timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) {
|
||||
KEY_POWER_OFF();
|
||||
suspend_power_down();
|
||||
}
|
||||
KEY_POWER_OFF();
|
||||
return 1;
|
||||
}
|
||||
|
||||
@ -165,3 +181,10 @@ void matrix_print(void)
|
||||
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_power_up(void) {
|
||||
KEY_POWER_ON();
|
||||
}
|
||||
void matrix_power_down(void) {
|
||||
KEY_POWER_OFF();
|
||||
}
|
||||
|
||||
@ -1,166 +0,0 @@
|
||||
#ifndef HHKB_AVR_H
|
||||
#define HHKB_AVR_H
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
|
||||
|
||||
// Timer resolution check
|
||||
#if (1000000/TIMER_RAW_FREQ > 20)
|
||||
# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* HHKB Matrix I/O
|
||||
*
|
||||
* row: HC4051[A,B,C] selects scan row0-7
|
||||
* row-ext: [En0,En1] row extention for JP
|
||||
* col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
|
||||
* key: on: 0/off: 1
|
||||
* prev: hysteresis control: assert(1) when previous key state is on
|
||||
*/
|
||||
|
||||
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
/*
|
||||
* For TMK HHKB alt controller(ATMega32U4)
|
||||
*
|
||||
* row: PB0-2
|
||||
* col: PB3-5,6
|
||||
* key: PD7(pull-uped)
|
||||
* prev: PB7
|
||||
* power: PD4(L:off/H:on)
|
||||
* row-ext: PC6,7 for HHKB JP(active low)
|
||||
*/
|
||||
static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); }
|
||||
static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
|
||||
static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
|
||||
static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
|
||||
static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
|
||||
#ifdef HHKB_POWER_SAVING
|
||||
static inline void KEY_POWER_ON(void) {
|
||||
DDRB = 0xFF; PORTB = 0x40; // change pins output
|
||||
DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
|
||||
/* Without this wait you will miss or get false key events. */
|
||||
_delay_ms(5); // wait for powering up
|
||||
}
|
||||
static inline void KEY_POWER_OFF(void) {
|
||||
/* input with pull-up consumes less than without it when pin is open. */
|
||||
DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
|
||||
DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
|
||||
}
|
||||
static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); }
|
||||
#else
|
||||
static inline void KEY_POWER_ON(void) {}
|
||||
static inline void KEY_POWER_OFF(void) {}
|
||||
static inline bool KEY_POWER_STATE(void) { return true; }
|
||||
#endif
|
||||
static inline void KEY_INIT(void)
|
||||
{
|
||||
/* row,col,prev: output */
|
||||
DDRB = 0xFF;
|
||||
PORTB = 0x40; // unable
|
||||
/* key: input with pull-up */
|
||||
DDRD &= ~0x80;
|
||||
PORTD |= 0x80;
|
||||
#ifdef HHKB_JP
|
||||
/* row extention for HHKB JP */
|
||||
DDRC |= (1<<6|1<<7);
|
||||
PORTC |= (1<<6|1<<7);
|
||||
#endif
|
||||
KEY_UNABLE();
|
||||
KEY_PREV_OFF();
|
||||
|
||||
KEY_POWER_OFF();
|
||||
}
|
||||
static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
|
||||
{
|
||||
PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07);
|
||||
#ifdef HHKB_JP
|
||||
if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6);
|
||||
else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
#elif defined(__AVR_AT90USB1286__)
|
||||
/*
|
||||
* For Teensy++(AT90USB1286)
|
||||
*
|
||||
* HHKB pro HHKB pro2
|
||||
* row: PB0-2 (6-8) (5-7)
|
||||
* col: PB3-5,6 (9-12) (8-11)
|
||||
* key: PE6(pull-uped) (4) (3)
|
||||
* prev: PE7 (5) (4)
|
||||
*
|
||||
* TODO: convert into 'staitc inline' function
|
||||
*/
|
||||
#define KEY_INIT() do { \
|
||||
DDRB |= 0x7F; \
|
||||
DDRE |= (1<<7); \
|
||||
DDRE &= ~(1<<6); \
|
||||
PORTE |= (1<<6); \
|
||||
} while (0)
|
||||
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
|
||||
(((COL) & 0x07)<<3) | \
|
||||
((ROW) & 0x07))
|
||||
#define KEY_ENABLE() (PORTB &= ~(1<<6))
|
||||
#define KEY_UNABLE() (PORTB |= (1<<6))
|
||||
#define KEY_STATE() (PINE & (1<<6))
|
||||
#define KEY_PREV_ON() (PORTE |= (1<<7))
|
||||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
|
||||
#define KEY_POWER_ON()
|
||||
#define KEY_POWER_OFF()
|
||||
|
||||
|
||||
#else
|
||||
# error "define code for matrix scan"
|
||||
#endif
|
||||
|
||||
|
||||
#if 0
|
||||
// For ATMega328P with V-USB
|
||||
//
|
||||
// #elif defined(__AVR_ATmega328P__)
|
||||
// Ports for V-USB
|
||||
// key: PB0(pull-uped)
|
||||
// prev: PB1
|
||||
// row: PB2-4
|
||||
// col: PC0-2,3
|
||||
// power: PB5(Low:on/Hi-z:off)
|
||||
#define KEY_INIT() do { \
|
||||
DDRB |= 0x3E; \
|
||||
DDRB &= ~(1<<0); \
|
||||
PORTB |= 1<<0; \
|
||||
DDRC |= 0x0F; \
|
||||
KEY_UNABLE(); \
|
||||
KEY_PREV_OFF(); \
|
||||
} while (0)
|
||||
#define KEY_SELECT(ROW, COL) do { \
|
||||
PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
|
||||
PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
|
||||
} while (0)
|
||||
#define KEY_ENABLE() (PORTC &= ~(1<<3))
|
||||
#define KEY_UNABLE() (PORTC |= (1<<3))
|
||||
#define KEY_STATE() (PINB & (1<<0))
|
||||
#define KEY_PREV_ON() (PORTB |= (1<<1))
|
||||
#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
|
||||
// Power supply switching
|
||||
#define KEY_POWER_ON() do { \
|
||||
KEY_INIT(); \
|
||||
PORTB &= ~(1<<5); \
|
||||
_delay_ms(1); \
|
||||
} while (0)
|
||||
#define KEY_POWER_OFF() do { \
|
||||
DDRB &= ~0x3F; \
|
||||
PORTB &= ~0x3F; \
|
||||
DDRC &= ~0x0F; \
|
||||
PORTC &= ~0x0F; \
|
||||
} while (0)
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -1,33 +0,0 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include "action.h"
|
||||
#include <avr/pgmspace.h>
|
||||
#include "keymap_common.h"
|
||||
|
||||
|
||||
/* translates key to keycode */
|
||||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
|
||||
{
|
||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
|
||||
}
|
||||
|
||||
/* translates Fn keycode to action */
|
||||
action_t keymap_fn_to_action(uint8_t keycode)
|
||||
{
|
||||
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
|
||||
}
|
||||
@ -1,84 +0,0 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "keycode.h"
|
||||
#include "action.h"
|
||||
#include "action_code.h"
|
||||
#include "action_layer.h"
|
||||
#include "action_macro.h"
|
||||
#include "action_util.h"
|
||||
#include "report.h"
|
||||
#include "host.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "keymap.h"
|
||||
|
||||
|
||||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
|
||||
extern const uint16_t fn_actions[];
|
||||
|
||||
|
||||
#define KEYMAP( \
|
||||
K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
|
||||
K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
|
||||
K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
|
||||
K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
|
||||
K35, K36, K37, K57, K56 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
|
||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
|
||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
|
||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \
|
||||
}
|
||||
|
||||
|
||||
#define KEYMAP_JP( \
|
||||
K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \
|
||||
K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \
|
||||
K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \
|
||||
K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \
|
||||
K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \
|
||||
{ KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -1,282 +0,0 @@
|
||||
/*
|
||||
* Hasu: my personal keymap
|
||||
*/
|
||||
#include "keymap_common.h"
|
||||
|
||||
|
||||
#ifdef KEYMAP_SECTION_ENABLE
|
||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
|
||||
#else
|
||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
|
||||
#endif
|
||||
/* Layer 0: Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1|
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui|Alt | Fn4 |Fn5 |Gui|
|
||||
* `-------------------------------------------'
|
||||
*/
|
||||
[0] = \
|
||||
KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
|
||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \
|
||||
FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
|
||||
LGUI,LALT, FN4, FN5, RGUI),
|
||||
|
||||
/* Layer 1: HHKB mode[HHKB Fn]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | | | +| -|End|PgD|Dow|Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui|Alt | Space |Alt |Gui|
|
||||
* `-------------------------------------------'
|
||||
*/
|
||||
[1] = \
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
|
||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
|
||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \
|
||||
LGUI,LALT, TRNS, RALT,RGUI),
|
||||
|
||||
/* Layer 2: Vi mode[Slash]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui|Alt | Space |Alt |Gui|
|
||||
* `-------------------------------------------'
|
||||
*/
|
||||
[2] = \
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
|
||||
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
|
||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \
|
||||
LGUI,LALT, SPC, RALT,RGUI),
|
||||
|
||||
/* Layer 3: Mouse mode(IJKL)[Semicolon]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt | Mb1 |Fn |Fn |
|
||||
* `--------------------------------------------'
|
||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
|
||||
*/
|
||||
[3] = \
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
|
||||
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \
|
||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
|
||||
LGUI,LALT, BTN1, TRNS,TRNS),
|
||||
|
||||
/* Layer 4: Mouse mode(IJKL)[Space]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt | Mb1 |Fn |Fn |
|
||||
* `--------------------------------------------'
|
||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
|
||||
*/
|
||||
[4] = \
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
|
||||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
|
||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
|
||||
LGUI,LALT, TRNS, TRNS,TRNS),
|
||||
|
||||
#if 0
|
||||
/* Layer 3: Mouse mode(HJKL)[Semicolon]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt | Mb1 |Alt |Fn0|
|
||||
* `--------------------------------------------'
|
||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
|
||||
*/
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
TAB, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \
|
||||
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \
|
||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \
|
||||
LGUI,LALT, BTN1, RALT,TRNS),
|
||||
|
||||
/* Layer4: Mouse mode(HJKL)[Space]
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt | Fn0 |Alt |Fn0|
|
||||
* `--------------------------------------------'
|
||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
|
||||
*/
|
||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
FN8, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \
|
||||
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \
|
||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
|
||||
LGUI,LALT, TRNS, RALT,RGUI),
|
||||
#endif
|
||||
#if 0
|
||||
/* Layer x: Matias half-qwerty keyboard style[Space]
|
||||
* ,-----------------------------------------------------------.
|
||||
* | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt | Fn0 |Alt |Gui|
|
||||
* `--------------------------------------------'
|
||||
*/
|
||||
KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \
|
||||
BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \
|
||||
LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \
|
||||
LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \
|
||||
LGUI,LALT, TRNS, RALT,RGUI),
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
|
||||
/* id for user defined functions */
|
||||
enum function_id {
|
||||
LSHIFT_LPAREN,
|
||||
};
|
||||
|
||||
enum macro_id {
|
||||
HELLO,
|
||||
VOLUP,
|
||||
ALT_TAB,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* Fn action definition
|
||||
*/
|
||||
#ifdef KEYMAP_SECTION_ENABLE
|
||||
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
|
||||
#else
|
||||
const uint16_t fn_actions[] PROGMEM = {
|
||||
#endif
|
||||
[0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used)
|
||||
[1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps)
|
||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
|
||||
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
|
||||
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
|
||||
[5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL)
|
||||
[6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
|
||||
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
|
||||
[8] = ACTION_MACRO(ALT_TAB), // Application switching
|
||||
[9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
|
||||
[10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
|
||||
|
||||
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace
|
||||
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc
|
||||
// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '('
|
||||
// [x] = ACTION_MACRO(HELLO), // Macro: say hello
|
||||
// [x] = ACTION_MACRO(VOLUP), // Macro: media key
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* Macro definition
|
||||
*/
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch (id) {
|
||||
case HELLO:
|
||||
return (record->event.pressed ?
|
||||
MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) :
|
||||
MACRO_NONE );
|
||||
case VOLUP:
|
||||
return (record->event.pressed ?
|
||||
MACRO( D(VOLU), U(VOLU), END ) :
|
||||
MACRO_NONE );
|
||||
case ALT_TAB:
|
||||
return (record->event.pressed ?
|
||||
MACRO( D(LALT), D(TAB), END ) :
|
||||
MACRO( U(TAB), END ));
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* user defined action function
|
||||
*/
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
if (record->event.pressed) dprint("P"); else dprint("R");
|
||||
dprintf("%d", record->tap.count);
|
||||
if (record->tap.interrupted) dprint("i");
|
||||
dprint("\n");
|
||||
|
||||
switch (id) {
|
||||
case LSHIFT_LPAREN:
|
||||
// Shift parentheses example: LShft + tap '('
|
||||
// http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses
|
||||
// http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count > 0 && !record->tap.interrupted) {
|
||||
if (record->tap.interrupted) {
|
||||
dprint("tap interrupted\n");
|
||||
register_mods(MOD_BIT(KC_LSHIFT));
|
||||
}
|
||||
} else {
|
||||
register_mods(MOD_BIT(KC_LSHIFT));
|
||||
}
|
||||
} else {
|
||||
if (record->tap.count > 0 && !(record->tap.interrupted)) {
|
||||
add_weak_mods(MOD_BIT(KC_LSHIFT));
|
||||
send_keyboard_report();
|
||||
register_code(KC_9);
|
||||
unregister_code(KC_9);
|
||||
del_weak_mods(MOD_BIT(KC_LSHIFT));
|
||||
send_keyboard_report();
|
||||
record->tap.count = 0; // ad hoc: cancel tap
|
||||
} else {
|
||||
unregister_mods(MOD_BIT(KC_LSHIFT));
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
@ -1,50 +0,0 @@
|
||||
/*
|
||||
* HHKB JP Layout
|
||||
*/
|
||||
#include "keymap_common.h"
|
||||
|
||||
|
||||
#ifdef KEYMAP_SECTION_ENABLE
|
||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
|
||||
#else
|
||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
|
||||
#endif
|
||||
/* Layer 0: Default Layer */
|
||||
KEYMAP_JP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, \
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, \
|
||||
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS,ENT, \
|
||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, UP, RSFT, \
|
||||
FN0, ZKHK,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,FN0, LEFT,DOWN,RGHT),
|
||||
|
||||
/* Layer 1: HHKB mode (HHKB Fn)
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
|
||||
* |------------------------------------------------------` |
|
||||
* | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | +| -|End|PgD|Dow| | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | || | | | | | | | | || | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
KEYMAP_JP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
|
||||
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, \
|
||||
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS,PENT, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS),
|
||||
};
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* Fn action definition
|
||||
*/
|
||||
#ifdef KEYMAP_SECTION_ENABLE
|
||||
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
|
||||
#else
|
||||
const uint16_t fn_actions[] PROGMEM = {
|
||||
#endif
|
||||
[0] = ACTION_LAYER_MOMENTARY(1),
|
||||
};
|
||||
@ -1,33 +0,0 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "stdint.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
/* HHKB has no LEDs */
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
DDRD |= (1<<6);
|
||||
PORTD |= (1<<6);
|
||||
} else {
|
||||
DDRD |= (1<<6);
|
||||
PORTD &= ~(1<<6);
|
||||
}
|
||||
}
|
||||
@ -1,190 +0,0 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "timer.h"
|
||||
#include "matrix.h"
|
||||
#include "hhkb_avr.h"
|
||||
#include <avr/wdt.h>
|
||||
#include "suspend.h"
|
||||
#include "lufa.h"
|
||||
|
||||
|
||||
// matrix power saving
|
||||
#define MATRIX_POWER_SAVE 10000
|
||||
static uint32_t matrix_last_modified = 0;
|
||||
|
||||
// matrix state buffer(1:on, 0:off)
|
||||
static matrix_row_t *matrix;
|
||||
static matrix_row_t *matrix_prev;
|
||||
static matrix_row_t _matrix0[MATRIX_ROWS];
|
||||
static matrix_row_t _matrix1[MATRIX_ROWS];
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
#ifdef DEBUG
|
||||
debug_enable = true;
|
||||
debug_keyboard = true;
|
||||
#endif
|
||||
|
||||
KEY_INIT();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
|
||||
matrix = _matrix0;
|
||||
matrix_prev = _matrix1;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
uint8_t *tmp;
|
||||
|
||||
tmp = matrix_prev;
|
||||
matrix_prev = matrix;
|
||||
matrix = tmp;
|
||||
|
||||
// power on
|
||||
if (!KEY_POWER_STATE()) KEY_POWER_ON();
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
|
||||
KEY_SELECT(row, col);
|
||||
_delay_us(5);
|
||||
|
||||
// Not sure this is needed. This just emulates HHKB controller's behaviour.
|
||||
if (matrix_prev[row] & (1<<col)) {
|
||||
KEY_PREV_ON();
|
||||
}
|
||||
_delay_us(10);
|
||||
|
||||
// NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
|
||||
// If V-USB interrupts in this section we could lose 40us or so
|
||||
// and would read invalid value from KEY_STATE.
|
||||
uint8_t last = TIMER_RAW;
|
||||
|
||||
KEY_ENABLE();
|
||||
|
||||
// Wait for KEY_STATE outputs its value.
|
||||
// 1us was ok on one HHKB, but not worked on another.
|
||||
// no wait doesn't work on Teensy++ with pro(1us works)
|
||||
// no wait does work on tmk PCB(8MHz) with pro2
|
||||
// 1us wait does work on both of above
|
||||
// 1us wait doesn't work on tmk(16MHz)
|
||||
// 5us wait does work on tmk(16MHz)
|
||||
// 5us wait does work on tmk(16MHz/2)
|
||||
// 5us wait does work on tmk(8MHz)
|
||||
// 10us wait does work on Teensy++ with pro
|
||||
// 10us wait does work on 328p+iwrap with pro
|
||||
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
|
||||
_delay_us(5);
|
||||
|
||||
if (KEY_STATE()) {
|
||||
matrix[row] &= ~(1<<col);
|
||||
} else {
|
||||
matrix[row] |= (1<<col);
|
||||
}
|
||||
|
||||
// Ignore if this code region execution time elapses more than 20us.
|
||||
// MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us]
|
||||
// MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b)
|
||||
if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
|
||||
matrix[row] = matrix_prev[row];
|
||||
}
|
||||
|
||||
_delay_us(5);
|
||||
KEY_PREV_OFF();
|
||||
KEY_UNABLE();
|
||||
|
||||
// NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
|
||||
// This takes 25us or more to make sure KEY_STATE returns to idle state.
|
||||
_delay_us(75);
|
||||
}
|
||||
if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
|
||||
}
|
||||
// power off
|
||||
if (KEY_POWER_STATE() &&
|
||||
(USB_DeviceState == DEVICE_STATE_Suspended ||
|
||||
USB_DeviceState == DEVICE_STATE_Unattached ) &&
|
||||
timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) {
|
||||
KEY_POWER_OFF();
|
||||
suspend_power_down();
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
if (matrix[i] != matrix_prev[i])
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_has_ghost(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_power_up(void) {
|
||||
KEY_POWER_ON();
|
||||
}
|
||||
void matrix_power_down(void) {
|
||||
KEY_POWER_OFF();
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user