RAMA U80-A, wilba.tech WT60-A, WT65-A, WT80-A, IS31FL3736 driver (#3925)
* Initial commit of RAMA U80-A * Initial commit of RAMA U80-A * Moved IS31FL3736 driver, minor cleanups * Superficial stuff * Review changes * Refactored to use common code.
This commit is contained in:
Wilba6582
Jack Humbert
parent
f70f45ee67
commit
13e166d9c4
306
drivers/issi/is31fl3736.c
Normal file
306
drivers/issi/is31fl3736.c
Normal file
@ -0,0 +1,306 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <util/delay.h>
|
||||||
|
#else
|
||||||
|
#include "wait.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include "is31fl3736.h"
|
||||||
|
#include <string.h>
|
||||||
|
#include "i2c_master.h"
|
||||||
|
#include "progmem.h"
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// This is a 7-bit address, that gets left-shifted and bit 0
|
||||||
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
||||||
|
// The address will vary depending on your wiring:
|
||||||
|
// 00 <-> GND
|
||||||
|
// 01 <-> SCL
|
||||||
|
// 10 <-> SDA
|
||||||
|
// 11 <-> VCC
|
||||||
|
// ADDR1 represents A1:A0 of the 7-bit address.
|
||||||
|
// ADDR2 represents A3:A2 of the 7-bit address.
|
||||||
|
// The result is: 0b101(ADDR2)(ADDR1)
|
||||||
|
#define ISSI_ADDR_DEFAULT 0x50
|
||||||
|
|
||||||
|
#define ISSI_COMMANDREGISTER 0xFD
|
||||||
|
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
|
||||||
|
#define ISSI_INTERRUPTMASKREGISTER 0xF0
|
||||||
|
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
|
||||||
|
|
||||||
|
#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
|
||||||
|
#define ISSI_PAGE_PWM 0x01 //PG1
|
||||||
|
#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
|
||||||
|
#define ISSI_PAGE_FUNCTION 0x03 //PG3
|
||||||
|
|
||||||
|
#define ISSI_REG_CONFIGURATION 0x00 //PG3
|
||||||
|
#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
|
||||||
|
#define ISSI_REG_RESET 0x11// PG3
|
||||||
|
#define ISSI_REG_SWPULLUP 0x0F //PG3
|
||||||
|
#define ISSI_REG_CSPULLUP 0x10 //PG3
|
||||||
|
|
||||||
|
#ifndef ISSI_TIMEOUT
|
||||||
|
#define ISSI_TIMEOUT 100
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ISSI_PERSISTENCE
|
||||||
|
#define ISSI_PERSISTENCE 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Transfer buffer for TWITransmitData()
|
||||||
|
uint8_t g_twi_transfer_buffer[20];
|
||||||
|
|
||||||
|
// These buffers match the IS31FL3736 PWM registers.
|
||||||
|
// The control buffers match the PG0 LED On/Off registers.
|
||||||
|
// Storing them like this is optimal for I2C transfers to the registers.
|
||||||
|
// We could optimize this and take out the unused registers from these
|
||||||
|
// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
|
||||||
|
// probably not worth the extra complexity.
|
||||||
|
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
|
||||||
|
bool g_pwm_buffer_update_required = false;
|
||||||
|
|
||||||
|
uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
|
||||||
|
bool g_led_control_registers_update_required = false;
|
||||||
|
|
||||||
|
void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||||
|
{
|
||||||
|
g_twi_transfer_buffer[0] = reg;
|
||||||
|
g_twi_transfer_buffer[1] = data;
|
||||||
|
|
||||||
|
#if ISSI_PERSISTENCE > 0
|
||||||
|
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
||||||
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||||
|
{
|
||||||
|
// assumes PG1 is already selected
|
||||||
|
|
||||||
|
// transmit PWM registers in 12 transfers of 16 bytes
|
||||||
|
// g_twi_transfer_buffer[] is 20 bytes
|
||||||
|
|
||||||
|
// iterate over the pwm_buffer contents at 16 byte intervals
|
||||||
|
for ( int i = 0; i < 192; i += 16 ) {
|
||||||
|
g_twi_transfer_buffer[0] = i;
|
||||||
|
// copy the data from i to i+15
|
||||||
|
// device will auto-increment register for data after the first byte
|
||||||
|
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
|
||||||
|
for ( int j = 0; j < 16; j++ ) {
|
||||||
|
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
|
||||||
|
}
|
||||||
|
|
||||||
|
#if ISSI_PERSISTENCE > 0
|
||||||
|
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
||||||
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_init( uint8_t addr )
|
||||||
|
{
|
||||||
|
// In order to avoid the LEDs being driven with garbage data
|
||||||
|
// in the LED driver's PWM registers, shutdown is enabled last.
|
||||||
|
// Set up the mode and other settings, clear the PWM registers,
|
||||||
|
// then disable software shutdown.
|
||||||
|
|
||||||
|
// Unlock the command register.
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||||
|
|
||||||
|
// Select PG0
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
|
||||||
|
// Turn off all LEDs.
|
||||||
|
for ( int i = 0x00; i <= 0x17; i++ )
|
||||||
|
{
|
||||||
|
IS31FL3736_write_register( addr, i, 0x00 );
|
||||||
|
}
|
||||||
|
|
||||||
|
// Unlock the command register.
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||||
|
|
||||||
|
// Select PG1
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
|
||||||
|
// Set PWM on all LEDs to 0
|
||||||
|
// No need to setup Breath registers to PWM as that is the default.
|
||||||
|
for ( int i = 0x00; i <= 0xBF; i++ )
|
||||||
|
{
|
||||||
|
IS31FL3736_write_register( addr, i, 0x00 );
|
||||||
|
}
|
||||||
|
|
||||||
|
// Unlock the command register.
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||||
|
|
||||||
|
// Select PG3
|
||||||
|
IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
|
||||||
|
// Set global current to maximum.
|
||||||
|
IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
|
||||||
|
// Disable software shutdown.
|
||||||
|
IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
|
||||||
|
|
||||||
|
// Wait 10ms to ensure the device has woken up.
|
||||||
|
#ifdef __AVR__
|
||||||
|
_delay_ms( 10 );
|
||||||
|
#else
|
||||||
|
wait_ms(10);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
|
||||||
|
{
|
||||||
|
if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
|
||||||
|
is31_led led = g_is31_leds[index];
|
||||||
|
|
||||||
|
g_pwm_buffer[led.driver][led.r] = red;
|
||||||
|
g_pwm_buffer[led.driver][led.g] = green;
|
||||||
|
g_pwm_buffer[led.driver][led.b] = blue;
|
||||||
|
g_pwm_buffer_update_required = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
|
||||||
|
{
|
||||||
|
for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
|
||||||
|
{
|
||||||
|
IS31FL3736_set_color( i, red, green, blue );
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
|
||||||
|
{
|
||||||
|
is31_led led = g_is31_leds[index];
|
||||||
|
|
||||||
|
// IS31FL3733
|
||||||
|
// The PWM register for a matrix position (0x00 to 0xBF) can be
|
||||||
|
// divided by 8 to get the LED control register (0x00 to 0x17),
|
||||||
|
// then mod 8 to get the bit position within that register.
|
||||||
|
|
||||||
|
// IS31FL3736
|
||||||
|
// The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
|
||||||
|
// A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
|
||||||
|
// B1=0x10 B2=0x12 B3=0x14
|
||||||
|
// But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
|
||||||
|
// A1-A4=0x00 A5-A8=0x01
|
||||||
|
// So, the same math applies.
|
||||||
|
|
||||||
|
uint8_t control_register_r = led.r / 8;
|
||||||
|
uint8_t control_register_g = led.g / 8;
|
||||||
|
uint8_t control_register_b = led.b / 8;
|
||||||
|
|
||||||
|
uint8_t bit_r = led.r % 8;
|
||||||
|
uint8_t bit_g = led.g % 8;
|
||||||
|
uint8_t bit_b = led.b % 8;
|
||||||
|
|
||||||
|
if ( red ) {
|
||||||
|
g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
|
||||||
|
} else {
|
||||||
|
g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
|
||||||
|
}
|
||||||
|
if ( green ) {
|
||||||
|
g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
|
||||||
|
} else {
|
||||||
|
g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
|
||||||
|
}
|
||||||
|
if ( blue ) {
|
||||||
|
g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
|
||||||
|
} else {
|
||||||
|
g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
|
||||||
|
}
|
||||||
|
|
||||||
|
g_led_control_registers_update_required = true;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_mono_set_brightness( int index, uint8_t value )
|
||||||
|
{
|
||||||
|
if ( index >= 0 && index < 96 ) {
|
||||||
|
// Index in range 0..95 -> A1..A8, B1..B8, etc.
|
||||||
|
// Map index 0..95 to registers 0x00..0xBE (interleaved)
|
||||||
|
uint8_t pwm_register = index * 2;
|
||||||
|
g_pwm_buffer[0][pwm_register] = value;
|
||||||
|
g_pwm_buffer_update_required = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_mono_set_brightness_all( uint8_t value )
|
||||||
|
{
|
||||||
|
for ( int i = 0; i < 96; i++ )
|
||||||
|
{
|
||||||
|
IS31FL3736_mono_set_brightness( i, value );
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
|
||||||
|
{
|
||||||
|
// Index in range 0..95 -> A1..A8, B1..B8, etc.
|
||||||
|
|
||||||
|
// Map index 0..95 to registers 0x00..0xBE (interleaved)
|
||||||
|
uint8_t pwm_register = index * 2;
|
||||||
|
// Map register 0x00..0xBE (interleaved) into control register and bit
|
||||||
|
uint8_t control_register = pwm_register / 8;
|
||||||
|
uint8_t bit = pwm_register % 8;
|
||||||
|
|
||||||
|
if ( enabled ) {
|
||||||
|
g_led_control_registers[0][control_register] |= (1 << bit);
|
||||||
|
} else {
|
||||||
|
g_led_control_registers[0][control_register] &= ~(1 << bit);
|
||||||
|
}
|
||||||
|
|
||||||
|
g_led_control_registers_update_required = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
|
||||||
|
{
|
||||||
|
if ( g_pwm_buffer_update_required )
|
||||||
|
{
|
||||||
|
// Firstly we need to unlock the command register and select PG1
|
||||||
|
IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||||
|
IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
|
||||||
|
|
||||||
|
IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
|
||||||
|
//IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
|
||||||
|
}
|
||||||
|
g_pwm_buffer_update_required = false;
|
||||||
|
}
|
||||||
|
|
||||||
|
void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
|
||||||
|
{
|
||||||
|
if ( g_led_control_registers_update_required )
|
||||||
|
{
|
||||||
|
// Firstly we need to unlock the command register and select PG0
|
||||||
|
IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||||
|
IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
|
||||||
|
for ( int i=0; i<24; i++ )
|
||||||
|
{
|
||||||
|
IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
|
||||||
|
//IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
172
drivers/issi/is31fl3736.h
Normal file
172
drivers/issi/is31fl3736.h
Normal file
@ -0,0 +1,172 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
|
||||||
|
// Simple interface option.
|
||||||
|
// If these aren't defined, just define them to make it compile
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef DRIVER_COUNT
|
||||||
|
#define DRIVER_COUNT 2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef DRIVER_LED_TOTAL
|
||||||
|
#define DRIVER_LED_TOTAL 96
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct is31_led {
|
||||||
|
uint8_t driver:2;
|
||||||
|
uint8_t r;
|
||||||
|
uint8_t g;
|
||||||
|
uint8_t b;
|
||||||
|
} __attribute__((packed)) is31_led;
|
||||||
|
|
||||||
|
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
|
||||||
|
|
||||||
|
void IS31FL3736_init( uint8_t addr );
|
||||||
|
void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
|
||||||
|
void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
|
||||||
|
|
||||||
|
void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
|
||||||
|
void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
|
||||||
|
|
||||||
|
void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
|
||||||
|
|
||||||
|
void IS31FL3736_mono_set_brightness( int index, uint8_t value );
|
||||||
|
void IS31FL3736_mono_set_brightness_all( uint8_t value );
|
||||||
|
void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
|
||||||
|
|
||||||
|
// This should not be called from an interrupt
|
||||||
|
// (eg. from a timer interrupt).
|
||||||
|
// Call this while idle (in between matrix scans).
|
||||||
|
// If the buffer is dirty, it will update the driver with the buffer.
|
||||||
|
void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
|
||||||
|
void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
|
||||||
|
|
||||||
|
#define A_1 0x00
|
||||||
|
#define A_2 0x02
|
||||||
|
#define A_3 0x04
|
||||||
|
#define A_4 0x06
|
||||||
|
#define A_5 0x08
|
||||||
|
#define A_6 0x0A
|
||||||
|
#define A_7 0x0C
|
||||||
|
#define A_8 0x0E
|
||||||
|
|
||||||
|
#define B_1 0x10
|
||||||
|
#define B_2 0x12
|
||||||
|
#define B_3 0x14
|
||||||
|
#define B_4 0x16
|
||||||
|
#define B_5 0x18
|
||||||
|
#define B_6 0x1A
|
||||||
|
#define B_7 0x1C
|
||||||
|
#define B_8 0x1E
|
||||||
|
|
||||||
|
#define C_1 0x20
|
||||||
|
#define C_2 0x22
|
||||||
|
#define C_3 0x24
|
||||||
|
#define C_4 0x26
|
||||||
|
#define C_5 0x28
|
||||||
|
#define C_6 0x2A
|
||||||
|
#define C_7 0x2C
|
||||||
|
#define C_8 0x2E
|
||||||
|
|
||||||
|
#define D_1 0x30
|
||||||
|
#define D_2 0x32
|
||||||
|
#define D_3 0x34
|
||||||
|
#define D_4 0x36
|
||||||
|
#define D_5 0x38
|
||||||
|
#define D_6 0x3A
|
||||||
|
#define D_7 0x3C
|
||||||
|
#define D_8 0x3E
|
||||||
|
|
||||||
|
#define E_1 0x40
|
||||||
|
#define E_2 0x42
|
||||||
|
#define E_3 0x44
|
||||||
|
#define E_4 0x46
|
||||||
|
#define E_5 0x48
|
||||||
|
#define E_6 0x4A
|
||||||
|
#define E_7 0x4C
|
||||||
|
#define E_8 0x4E
|
||||||
|
|
||||||
|
#define F_1 0x50
|
||||||
|
#define F_2 0x52
|
||||||
|
#define F_3 0x54
|
||||||
|
#define F_4 0x56
|
||||||
|
#define F_5 0x58
|
||||||
|
#define F_6 0x5A
|
||||||
|
#define F_7 0x5C
|
||||||
|
#define F_8 0x5E
|
||||||
|
|
||||||
|
#define G_1 0x60
|
||||||
|
#define G_2 0x62
|
||||||
|
#define G_3 0x64
|
||||||
|
#define G_4 0x66
|
||||||
|
#define G_5 0x68
|
||||||
|
#define G_6 0x6A
|
||||||
|
#define G_7 0x6C
|
||||||
|
#define G_8 0x6E
|
||||||
|
|
||||||
|
#define H_1 0x70
|
||||||
|
#define H_2 0x72
|
||||||
|
#define H_3 0x74
|
||||||
|
#define H_4 0x76
|
||||||
|
#define H_5 0x78
|
||||||
|
#define H_6 0x7A
|
||||||
|
#define H_7 0x7C
|
||||||
|
#define H_8 0x7E
|
||||||
|
|
||||||
|
#define I_1 0x80
|
||||||
|
#define I_2 0x82
|
||||||
|
#define I_3 0x84
|
||||||
|
#define I_4 0x86
|
||||||
|
#define I_5 0x88
|
||||||
|
#define I_6 0x8A
|
||||||
|
#define I_7 0x8C
|
||||||
|
#define I_8 0x8E
|
||||||
|
|
||||||
|
#define J_1 0x90
|
||||||
|
#define J_2 0x92
|
||||||
|
#define J_3 0x94
|
||||||
|
#define J_4 0x96
|
||||||
|
#define J_5 0x98
|
||||||
|
#define J_6 0x9A
|
||||||
|
#define J_7 0x9C
|
||||||
|
#define J_8 0x9E
|
||||||
|
|
||||||
|
#define K_1 0xA0
|
||||||
|
#define K_2 0xA2
|
||||||
|
#define K_3 0xA4
|
||||||
|
#define K_4 0xA6
|
||||||
|
#define K_5 0xA8
|
||||||
|
#define K_6 0xAA
|
||||||
|
#define K_7 0xAC
|
||||||
|
#define K_8 0xAE
|
||||||
|
|
||||||
|
#define L_1 0xB0
|
||||||
|
#define L_2 0xB2
|
||||||
|
#define L_3 0xB4
|
||||||
|
#define L_4 0xB6
|
||||||
|
#define L_5 0xB8
|
||||||
|
#define L_6 0xBA
|
||||||
|
#define L_7 0xBC
|
||||||
|
#define L_8 0xBE
|
||||||
|
|
||||||
@ -6,4 +6,6 @@ Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
|
|||||||
|
|
||||||
[RAMA M60-A](https://rama.works/#/m60-a/)
|
[RAMA M60-A](https://rama.works/#/m60-a/)
|
||||||
|
|
||||||
|
[RAMA U80-A](https://rama.works/#/tkl-a/)
|
||||||
|
|
||||||
[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)
|
[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)
|
||||||
|
|||||||
187
keyboards/rama/u80_a/config.h
Normal file
187
keyboards/rama/u80_a/config.h
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0x5241 // "RW"
|
||||||
|
#define PRODUCT_ID 0x080A // 80-A
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER RAMA.WORKS
|
||||||
|
#define PRODUCT RAMA U80-A
|
||||||
|
#define DESCRIPTION RAMA U80-A Keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 6
|
||||||
|
#define MATRIX_COLS 17
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||||
|
#define DIODE_DIRECTION ROW2COL
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
13
keyboards/rama/u80_a/info.json
Normal file
13
keyboards/rama/u80_a/info.json
Normal file
@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"keyboard_name": "RAMA U80-A",
|
||||||
|
"url": "https://rama.works/#/tkl-a/",
|
||||||
|
"maintainer": "Wilba",
|
||||||
|
"bootloader": "atmel-dfu",
|
||||||
|
"width": 18.25,
|
||||||
|
"height": 6.5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT_all": {
|
||||||
|
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
22
keyboards/rama/u80_a/keymaps/default/keymap.c
Normal file
22
keyboards/rama/u80_a/keymaps/default/keymap.c
Normal file
@ -0,0 +1,22 @@
|
|||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
[0] = LAYOUT_all(
|
||||||
|
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||||
|
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||||
|
|
||||||
|
[1] = LAYOUT_all(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
15
keyboards/rama/u80_a/readme.md
Normal file
15
keyboards/rama/u80_a/readme.md
Normal file
@ -0,0 +1,15 @@
|
|||||||
|
# RAMA U80-A
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
|
||||||
|
|
||||||
|
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
|
||||||
|
Hardware Supported: RAMA U80-A PCB
|
||||||
|
Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make rama/u80_a:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
68
keyboards/rama/u80_a/rules.mk
Normal file
68
keyboards/rama/u80_a/rules.mk
Normal file
@ -0,0 +1,68 @@
|
|||||||
|
# project specific files
|
||||||
|
SRC = drivers/issi/is31fl3736.c \
|
||||||
|
drivers/avr/i2c_master.c \
|
||||||
|
keyboards/wilba_tech/wt_mono_backlight.c \
|
||||||
|
keyboards/wilba_tech/wt_main.c
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
17
keyboards/rama/u80_a/u80_a.c
Normal file
17
keyboards/rama/u80_a/u80_a.c
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Nothing to see here, move along... ;-)
|
||||||
43
keyboards/rama/u80_a/u80_a.h
Normal file
43
keyboards/rama/u80_a/u80_a.h
Normal file
@ -0,0 +1,43 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define ____ KC_NO
|
||||||
|
|
||||||
|
// Right switch of split backspace is at 3,13 and is the only switch
|
||||||
|
// whose physical position doesn't match switch matrix position :-(
|
||||||
|
// However, it also makes no sense to view the physical as 18 columns,
|
||||||
|
// so the numbering goes 00 to 16. Deal with it.
|
||||||
|
|
||||||
|
#define LAYOUT_all( \
|
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
|
||||||
|
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
|
||||||
|
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \
|
||||||
|
K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K516 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
|
||||||
|
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
|
||||||
|
{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
|
||||||
|
{ K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 } \
|
||||||
|
}
|
||||||
|
|
||||||
187
keyboards/wilba_tech/wt60_a/config.h
Normal file
187
keyboards/wilba_tech/wt60_a/config.h
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0x6582 // wilba.tech
|
||||||
|
#define PRODUCT_ID 0x060A // 60-A
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER wilba.tech
|
||||||
|
#define PRODUCT wilba.tech WT60-A
|
||||||
|
#define DESCRIPTION wilba.tech WT60-A
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 5
|
||||||
|
#define MATRIX_COLS 14
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||||
|
#define DIODE_DIRECTION ROW2COL
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
16
keyboards/wilba_tech/wt60_a/info.json
Normal file
16
keyboards/wilba_tech/wt60_a/info.json
Normal file
@ -0,0 +1,16 @@
|
|||||||
|
{
|
||||||
|
"keyboard_name": "wilba.tech WT60-A",
|
||||||
|
"url": "https://wilba.tech",
|
||||||
|
"maintainer": "Wilba",
|
||||||
|
"bootloader": "atmel-dfu",
|
||||||
|
"width": 15,
|
||||||
|
"height": 5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT_60_ansi": {
|
||||||
|
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
|
||||||
|
},
|
||||||
|
"LAYOUT_60_ansi_split_bs_rshift": {
|
||||||
|
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
@ -0,0 +1,38 @@
|
|||||||
|
// ANSI split backspace/right shift layout for WT60-A
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
// Default layer
|
||||||
|
[0] = LAYOUT_60_ansi_split_bs_rshift(
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL),
|
||||||
|
|
||||||
|
// Fn1 Layer
|
||||||
|
[1] = LAYOUT_60_ansi_split_bs_rshift(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
|
||||||
|
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn2 Layer
|
||||||
|
[2] = LAYOUT_60_ansi_split_bs_rshift(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn3 Layer
|
||||||
|
[3] = LAYOUT_60_ansi_split_bs_rshift(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
};
|
||||||
38
keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c
Normal file
38
keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c
Normal file
@ -0,0 +1,38 @@
|
|||||||
|
// Default layout for WT60-A
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
// Default layer
|
||||||
|
[0] = LAYOUT_60_ansi(
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||||
|
|
||||||
|
// Fn1 Layer
|
||||||
|
[1] = LAYOUT_60_ansi(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
|
||||||
|
KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn2 Layer
|
||||||
|
[2] = LAYOUT_60_ansi(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn3 Layer
|
||||||
|
[3] = LAYOUT_60_ansi(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
};
|
||||||
15
keyboards/wilba_tech/wt60_a/readme.md
Normal file
15
keyboards/wilba_tech/wt60_a/readme.md
Normal file
@ -0,0 +1,15 @@
|
|||||||
|
# WILBA.TECH WT60-A
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
WT60-A is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
|
||||||
|
|
||||||
|
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
|
||||||
|
Hardware Supported: WILBA.TECH WT65-A
|
||||||
|
Hardware Availability: Custom keyboard group buys
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make wilba_tech/wt60_a:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
68
keyboards/wilba_tech/wt60_a/rules.mk
Normal file
68
keyboards/wilba_tech/wt60_a/rules.mk
Normal file
@ -0,0 +1,68 @@
|
|||||||
|
# project specific files
|
||||||
|
SRC = drivers/issi/is31fl3736.c \
|
||||||
|
drivers/avr/i2c_master.c \
|
||||||
|
keyboards/wilba_tech/wt_mono_backlight.c \
|
||||||
|
keyboards/wilba_tech/wt_main.c
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
17
keyboards/wilba_tech/wt60_a/wt60_a.c
Normal file
17
keyboards/wilba_tech/wt60_a/wt60_a.c
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Nothing to see here, move along... ;-)
|
||||||
52
keyboards/wilba_tech/wt60_a/wt60_a.h
Normal file
52
keyboards/wilba_tech/wt60_a/wt60_a.h
Normal file
@ -0,0 +1,52 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define ____ KC_NO
|
||||||
|
|
||||||
|
#define LAYOUT_60_ansi_split_bs_rshift( \
|
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
|
||||||
|
K400, K401, K402, K406, K410, K411, K412, K413 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
|
||||||
|
{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
|
||||||
|
{ K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_60_ansi( \
|
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
|
||||||
|
K400, K401, K402, K406, K410, K411, K412, K413 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____ }, \
|
||||||
|
{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____ }, \
|
||||||
|
{ K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 } \
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
187
keyboards/wilba_tech/wt65_a/config.h
Normal file
187
keyboards/wilba_tech/wt65_a/config.h
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0x6582 // wilba.tech
|
||||||
|
#define PRODUCT_ID 0x065A // 65-A
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER wilba.tech
|
||||||
|
#define PRODUCT wilba.tech WT65-A
|
||||||
|
#define DESCRIPTION wilba.tech WT65-A
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 5
|
||||||
|
#define MATRIX_COLS 15
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||||
|
#define DIODE_DIRECTION ROW2COL
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
13
keyboards/wilba_tech/wt65_a/info.json
Normal file
13
keyboards/wilba_tech/wt65_a/info.json
Normal file
@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"keyboard_name": "wilba.tech WT65-A",
|
||||||
|
"url": "https://wilba.tech",
|
||||||
|
"maintainer": "Wilba",
|
||||||
|
"bootloader": "atmel-dfu",
|
||||||
|
"width": 16,
|
||||||
|
"height": 5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT_all": {
|
||||||
|
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Fn", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
37
keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c
Normal file
37
keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c
Normal file
@ -0,0 +1,37 @@
|
|||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
// Default layer
|
||||||
|
[0] = LAYOUT_all(
|
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||||
|
|
||||||
|
// Fn1 Layer
|
||||||
|
[1] = LAYOUT_all(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, KC_TRNS,
|
||||||
|
KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn2 Layer
|
||||||
|
[2] = LAYOUT_all(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
// Fn3 Layer
|
||||||
|
[3] = LAYOUT_all(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
};
|
||||||
|
|
||||||
15
keyboards/wilba_tech/wt65_a/readme.md
Normal file
15
keyboards/wilba_tech/wt65_a/readme.md
Normal file
@ -0,0 +1,15 @@
|
|||||||
|
# WILBA.TECH WT65-A
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
WT65-A is a keyboard PCB supporting 65% layout with 0.25U blocker. [More info at wilba.tech](https://wilba.tech/)
|
||||||
|
|
||||||
|
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
|
||||||
|
Hardware Supported: WILBA.TECH WT65-A
|
||||||
|
Hardware Availability: Custom keyboard group buys
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make wilba_tech/wt65_a:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
68
keyboards/wilba_tech/wt65_a/rules.mk
Normal file
68
keyboards/wilba_tech/wt65_a/rules.mk
Normal file
@ -0,0 +1,68 @@
|
|||||||
|
# project specific files
|
||||||
|
SRC = drivers/issi/is31fl3736.c \
|
||||||
|
drivers/avr/i2c_master.c \
|
||||||
|
keyboards/wilba_tech/wt_mono_backlight.c \
|
||||||
|
keyboards/wilba_tech/wt_main.c
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
17
keyboards/wilba_tech/wt65_a/wt65_a.c
Normal file
17
keyboards/wilba_tech/wt65_a/wt65_a.c
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Nothing to see here, move along... ;-)
|
||||||
41
keyboards/wilba_tech/wt65_a/wt65_a.h
Normal file
41
keyboards/wilba_tech/wt65_a/wt65_a.h
Normal file
@ -0,0 +1,41 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define ____ KC_NO
|
||||||
|
|
||||||
|
// Right switch of split backspace is at 2,13 and is the only switch
|
||||||
|
// whose physical position doesn't match switch matrix position :-(
|
||||||
|
// However, it also makes no sense to view the physical as 16 columns,
|
||||||
|
// so the numbering goes 00 to 14. Deal with it.
|
||||||
|
|
||||||
|
#define LAYOUT_all( \
|
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
|
||||||
|
K400, K401, K402, K406, K410, K411, K412, K413, K414 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
|
||||||
|
{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
|
||||||
|
{ K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413, K414 } \
|
||||||
|
}
|
||||||
|
|
||||||
187
keyboards/wilba_tech/wt80_a/config.h
Normal file
187
keyboards/wilba_tech/wt80_a/config.h
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0x6582 // wilba.tech
|
||||||
|
#define PRODUCT_ID 0x080A // 80-A
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER wilba.tech
|
||||||
|
#define PRODUCT wilba.tech WT80-A
|
||||||
|
#define DESCRIPTION wilba.tech WT80-A
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 6
|
||||||
|
#define MATRIX_COLS 17
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||||
|
#define DIODE_DIRECTION ROW2COL
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
13
keyboards/wilba_tech/wt80_a/info.json
Normal file
13
keyboards/wilba_tech/wt80_a/info.json
Normal file
@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"keyboard_name": "wilba.tech WT80-A",
|
||||||
|
"url": "https://wilba.tech",
|
||||||
|
"maintainer": "Wilba",
|
||||||
|
"bootloader": "atmel-dfu",
|
||||||
|
"width": 18.25,
|
||||||
|
"height": 6.5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT_all": {
|
||||||
|
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
22
keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c
Normal file
22
keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c
Normal file
@ -0,0 +1,22 @@
|
|||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
[0] = LAYOUT_all(
|
||||||
|
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||||
|
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||||
|
|
||||||
|
[1] = LAYOUT_all(
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
15
keyboards/wilba_tech/wt80_a/readme.md
Normal file
15
keyboards/wilba_tech/wt80_a/readme.md
Normal file
@ -0,0 +1,15 @@
|
|||||||
|
# WILBA.TECH WT80-A
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
WT80-A is a keyboard PCB supporting TKL layout with 0.25U gaps. [More info at wilba.tech](https://wilba.tech/)
|
||||||
|
|
||||||
|
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
|
||||||
|
Hardware Supported: WILBA.TECH WT80-A
|
||||||
|
Hardware Availability: Custom keyboard group buys
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make wilba_tech/wt80_a:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
68
keyboards/wilba_tech/wt80_a/rules.mk
Normal file
68
keyboards/wilba_tech/wt80_a/rules.mk
Normal file
@ -0,0 +1,68 @@
|
|||||||
|
# project specific files
|
||||||
|
SRC = drivers/issi/is31fl3736.c \
|
||||||
|
drivers/avr/i2c_master.c \
|
||||||
|
keyboards/wilba_tech/wt_mono_backlight.c \
|
||||||
|
keyboards/wilba_tech/wt_main.c
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
17
keyboards/wilba_tech/wt80_a/wt80_a.c
Normal file
17
keyboards/wilba_tech/wt80_a/wt80_a.c
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Nothing to see here, move along... ;-)
|
||||||
43
keyboards/wilba_tech/wt80_a/wt80_a.h
Normal file
43
keyboards/wilba_tech/wt80_a/wt80_a.h
Normal file
@ -0,0 +1,43 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define ____ KC_NO
|
||||||
|
|
||||||
|
// Right switch of split backspace is at 3,13 and is the only switch
|
||||||
|
// whose physical position doesn't match switch matrix position :-(
|
||||||
|
// However, it also makes no sense to view the physical as 18 columns,
|
||||||
|
// so the numbering goes 00 to 16. Deal with it.
|
||||||
|
|
||||||
|
#define LAYOUT_all( \
|
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
|
||||||
|
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
|
||||||
|
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \
|
||||||
|
K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K516 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
|
||||||
|
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
|
||||||
|
{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
|
||||||
|
{ K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 } \
|
||||||
|
}
|
||||||
|
|
||||||
55
keyboards/wilba_tech/wt_main.c
Normal file
55
keyboards/wilba_tech/wt_main.c
Normal file
@ -0,0 +1,55 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
#include "keyboards/wilba_tech/wt_mono_backlight.h"
|
||||||
|
|
||||||
|
void bootmagic_lite(void)
|
||||||
|
{
|
||||||
|
// The lite version of TMK's bootmagic.
|
||||||
|
// 100% less potential for accidentally making the
|
||||||
|
// keyboard do stupid things.
|
||||||
|
|
||||||
|
// We need multiple scans because debouncing can't be turned off.
|
||||||
|
matrix_scan();
|
||||||
|
wait_ms(DEBOUNCING_DELAY);
|
||||||
|
wait_ms(DEBOUNCING_DELAY);
|
||||||
|
matrix_scan();
|
||||||
|
|
||||||
|
// If the Esc (matrix 0,0) is held down on power up,
|
||||||
|
// reset the EEPROM valid state and jump to bootloader.
|
||||||
|
if ( matrix_get_row(0) & (1<<0) ) {
|
||||||
|
// Set the TMK/QMK EEPROM state as invalid.
|
||||||
|
eeconfig_disable();
|
||||||
|
// Jump to bootloader.
|
||||||
|
bootloader_jump();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void)
|
||||||
|
{
|
||||||
|
bootmagic_lite();
|
||||||
|
backlight_init_drivers();
|
||||||
|
backlight_timer_init();
|
||||||
|
backlight_timer_enable();
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void)
|
||||||
|
{
|
||||||
|
backlight_update_pwm_buffers();
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
116
keyboards/wilba_tech/wt_mono_backlight.c
Normal file
116
keyboards/wilba_tech/wt_mono_backlight.c
Normal file
@ -0,0 +1,116 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "wt_mono_backlight.h"
|
||||||
|
#include "drivers/avr/i2c_master.h"
|
||||||
|
#include "drivers/issi/is31fl3736.h"
|
||||||
|
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
|
||||||
|
#define ISSI_ADDR_DEFAULT 0x50
|
||||||
|
|
||||||
|
bool g_suspend_state = false;
|
||||||
|
|
||||||
|
// Global tick at 20 Hz
|
||||||
|
uint32_t g_tick = 0;
|
||||||
|
uint8_t g_config_effect_speed = 0;
|
||||||
|
uint8_t g_config_brightness = 255;
|
||||||
|
|
||||||
|
void backlight_init_drivers(void)
|
||||||
|
{
|
||||||
|
// Initialize I2C
|
||||||
|
i2c_init();
|
||||||
|
IS31FL3736_init( ISSI_ADDR_DEFAULT );
|
||||||
|
|
||||||
|
for ( uint8_t index = 0; index < 96; index++ ) {
|
||||||
|
IS31FL3736_mono_set_led_control_register( index, true );
|
||||||
|
}
|
||||||
|
IS31FL3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 );
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// This is (F_CPU/1024) / 20 Hz
|
||||||
|
// = 15625 Hz / 20 Hz
|
||||||
|
// = 781
|
||||||
|
#define TIMER3_TOP 781
|
||||||
|
|
||||||
|
void backlight_timer_init(void)
|
||||||
|
{
|
||||||
|
static uint8_t backlight_timer_is_init = 0;
|
||||||
|
if ( backlight_timer_is_init ) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
backlight_timer_is_init = 1;
|
||||||
|
|
||||||
|
// Timer 3 setup
|
||||||
|
TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP
|
||||||
|
_BV(CS32) | _BV(CS30); // prescale by /1024
|
||||||
|
// Set TOP value
|
||||||
|
uint8_t sreg = SREG;
|
||||||
|
cli();
|
||||||
|
|
||||||
|
OCR3AH = (TIMER3_TOP >> 8) & 0xff;
|
||||||
|
OCR3AL = TIMER3_TOP & 0xff;
|
||||||
|
SREG = sreg;
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_timer_enable(void)
|
||||||
|
{
|
||||||
|
TIMSK3 |= _BV(OCIE3A);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_timer_disable(void)
|
||||||
|
{
|
||||||
|
TIMSK3 &= ~_BV(OCIE3A);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_set_suspend_state(bool state)
|
||||||
|
{
|
||||||
|
g_suspend_state = state;
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_effect_cycle_all(void)
|
||||||
|
{
|
||||||
|
uint8_t offset = ( g_tick << g_config_effect_speed ) & 0xFF;
|
||||||
|
|
||||||
|
backlight_set_brightness_all( offset );
|
||||||
|
}
|
||||||
|
|
||||||
|
ISR(TIMER3_COMPA_vect)
|
||||||
|
{
|
||||||
|
// delay 1 second before driving LEDs or doing anything else
|
||||||
|
static uint8_t startup_tick = 0;
|
||||||
|
if ( startup_tick < 20 ) {
|
||||||
|
startup_tick++;
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
g_tick++;
|
||||||
|
|
||||||
|
//backlight_effect_cycle_all();
|
||||||
|
backlight_set_brightness_all( 255 );
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_update_pwm_buffers(void)
|
||||||
|
{
|
||||||
|
IS31FL3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_set_brightness_all( uint8_t value )
|
||||||
|
{
|
||||||
|
IS31FL3736_mono_set_brightness_all( value );
|
||||||
|
}
|
||||||
|
|
||||||
33
keyboards/wilba_tech/wt_mono_backlight.h
Normal file
33
keyboards/wilba_tech/wt_mono_backlight.h
Normal file
@ -0,0 +1,33 @@
|
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
void backlight_init_drivers(void);
|
||||||
|
|
||||||
|
void backlight_timer_init(void);
|
||||||
|
void backlight_timer_enable(void);
|
||||||
|
void backlight_timer_disable(void);
|
||||||
|
|
||||||
|
void backlight_set_suspend_state(bool state);
|
||||||
|
|
||||||
|
void backlight_update_pwm_buffers(void);
|
||||||
|
|
||||||
|
void backlight_set_brightness_all( uint8_t value );
|
||||||
|
|
||||||
Loading…
Reference in New Issue
Block a user