The Key Company project consolidation (#9547)
* Consolidate TKC projects and increase VIA keymap count to 4. * Updated readme files. * Removed config.h via limitation of 2 dynamic keymaps * Reduce dynamic keymaps from 4 to 3 due to EEPROM space limitations. * Update dynamic_keymap.c * Restore 4 dynamic keymaps for VIA in TKC projects. * Update quantum/dynamic_keymap.c
This commit is contained in:
TerryMathews
committed by
James Young
James Young
parent
e6266b19be
commit
4764aa8711
7
keyboards/tkc/candybar/bootloader_defs.h
Normal file
7
keyboards/tkc/candybar/bootloader_defs.h
Normal file
@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
|
||||
714
keyboards/tkc/candybar/chconf.h
Normal file
714
keyboards/tkc/candybar/chconf.h
Normal file
@ -0,0 +1,714 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file rt/templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_0_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_RESOLUTION)
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_FREQUENCY)
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time intervals data size.
|
||||
* @note Allowed values are 16, 32 or 64 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_INTERVALS_SIZE)
|
||||
#define CH_CFG_INTERVALS_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time types data size.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_TYPES_SIZE)
|
||||
#define CH_CFG_TIME_TYPES_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_TIMEDELTA)
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_QUANTUM)
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#if !defined(CH_CFG_NO_IDLE_THREAD)
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_OPTIMIZE_SPEED)
|
||||
#define CH_CFG_OPTIMIZE_SPEED FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_TM)
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_REGISTRY)
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_WAITEXIT)
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES)
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES)
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS)
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS)
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES)
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MAILBOXES)
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMCORE)
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_HEAP)
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMPOOLS)
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Objects FIFOs APIs.
|
||||
* @details If enabled then the objects FIFOs APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_OBJ_FIFOS)
|
||||
#define CH_CFG_USE_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Pipes APIs.
|
||||
* @details If enabled then the pipes APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_PIPES)
|
||||
#define CH_CFG_USE_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Objects factory options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Objects Factory APIs.
|
||||
* @details If enabled then the objects factory APIs are included in the
|
||||
* kernel.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_FACTORY)
|
||||
#define CH_CFG_USE_FACTORY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Maximum length for object names.
|
||||
* @details If the specified length is zero then the name is stored by
|
||||
* pointer but this could have unintended side effects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
|
||||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the registry of generic objects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for generic buffers.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for semaphores.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
|
||||
#define CH_CFG_FACTORY_SEMAPHORES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for mailboxes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAILBOXES)
|
||||
#define CH_CFG_FACTORY_MAILBOXES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for objects FIFOs.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for Pipes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
|
||||
#define CH_CFG_FACTORY_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_STATISTICS)
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_CHECKS)
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_ASSERTS)
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_MASK)
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_FILL_THREADS)
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#if !defined(CH_DBG_THREADS_PROFILING)
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System structure extension.
|
||||
* @details User fields added to the end of the @p ch_system_t structure.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief System initialization hook.
|
||||
* @details User initialization code added to the @p chSysInit() function
|
||||
* just before interrupts are enabled globally.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_INIT_HOOK() { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p _thread_init() function.
|
||||
*
|
||||
* @note It is invoked from within @p _thread_init() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
525
keyboards/tkc/candybar/halconf.h
Normal file
525
keyboards/tkc/candybar/halconf.h
Normal file
@ -0,0 +1,525 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#define _CHIBIOS_HAL_CONF_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_0_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the cryptographic subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SIO subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SIO FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the TRNG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_TRNG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WSPI FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* PAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
|
||||
*/
|
||||
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define CAN_ENFORCE_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CRY driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the SW fall-back of the cryptographic driver.
|
||||
* @details When enabled, this option, activates a fall-back software
|
||||
* implementation for algorithms not supported by the underlying
|
||||
* hardware.
|
||||
* @note Fall-back implementations may not be present for all algorithms.
|
||||
*/
|
||||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_USE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Makes the driver forcibly use the fall-back implementations.
|
||||
*/
|
||||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_ENFORCE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* DAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the zero-copy API.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR_V20 0x50FF8000U
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for non-V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR 0x80100000U
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables circular transfers APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_CIRCULAR FALSE
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Handling method for SPI CS line.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
|
||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* WSPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
||||
115
keyboards/tkc/candybar/lefty/config.h
Normal file
115
keyboards/tkc/candybar/lefty/config.h
Normal file
@ -0,0 +1,115 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x544B //TK
|
||||
#define PRODUCT_ID 0x0003
|
||||
#define DEVICE_VER 0x0006
|
||||
#define MANUFACTURER The Key Company
|
||||
#define PRODUCT Candybar
|
||||
#define DESCRIPTION A compact staggered 40% keyboard with attached numpad
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 17
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
// #define WS2812_LED_N 2
|
||||
// #define RGBLED_NUM WS2812_LED_N
|
||||
// #define WS2812_TIM_N 2
|
||||
// #define WS2812_TIM_CH 2
|
||||
// #define PORT_WS2812 GPIOA
|
||||
// #define PIN_WS2812 1
|
||||
// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
|
||||
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
|
||||
//#define WS2812_EXTERNAL_PULLUP
|
||||
17
keyboards/tkc/candybar/lefty/info.json
Normal file
17
keyboards/tkc/candybar/lefty/info.json
Normal file
@ -0,0 +1,17 @@
|
||||
{
|
||||
"keyboard_name": "TKC Candybar",
|
||||
"url": "",
|
||||
"maintainer": "terrymathews",
|
||||
"width": 17,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"Q", "x":5, "y":0}, {"label":"W", "x":6, "y":0}, {"label":"E", "x":7, "y":0}, {"label":"R", "x":8, "y":0}, {"label":"T", "x":9, "y":0}, {"label":"Y", "x":10, "y":0}, {"label":"U", "x":11, "y":0}, {"label":"I", "x":12, "y":0}, {"label":"O", "x":13, "y":0}, {"label":"P", "x":14, "y":0}, {"label":"{", "x":15, "y":0}, {"label":"}", "x":16, "y":0},
|
||||
{"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.25}, {"label":"A", "x":5.25, "y":1}, {"label":"S", "x":6.25, "y":1}, {"label":"D", "x":7.25, "y":1}, {"label":"F", "x":8.25, "y":1}, {"label":"G", "x":9.25, "y":1}, {"label":"H", "x":10.25, "y":1}, {"label":"J", "x":11.25, "y":1}, {"label":"K", "x":12.25, "y":1}, {"label":"L", "x":13.25, "y":1}, {"label":":", "x":14.25, "y":1}, {"label":"Enter", "x":15.25, "y":1, "w":1.75},
|
||||
{"label":"1", "x":0, "y":2}, {"label":"2", "x":1, "y":2}, {"label":"3", "x":2, "y":2}, {"x":3, "y":2}, {"label":"Shift", "x":4, "y":2, "w":1.75}, {"label":"Z", "x":5.75, "y":2}, {"label":"X", "x":6.75, "y":2}, {"label":"C", "x":7.75, "y":2}, {"label":"V", "x":8.75, "y":2}, {"label":"B", "x":9.75, "y":2}, {"label":"N", "x":10.75, "y":2}, {"label":"M", "x":11.75, "y":2}, {"label":"<", "x":12.75, "y":2}, {"label":">", "x":13.75, "y":2}, {"label":"\u2191", "x":14.75, "y":2}, {"label":"Shift", "x":15.75, "y":2, "w":1.25},
|
||||
{"label":"Fn", "x":0, "y":3}, {"label":"0", "x":1, "y":3}, {"label":".", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"Ctrl", "x":4, "y":3, "w":1.25}, {"label":"Win", "x":5.25, "y":3, "w":1.25}, {"label":"Alt", "x":6.5, "y":3, "w":1.25}, {"x":7.75, "y":3, "w":1.75}, {"x":9.5, "y":3}, {"x":10.5, "y":3, "w":2.25}, {"label":"Win", "x":12.75, "y":3, "w":1.25}, {"label":"\u2190", "x":14, "y":3}, {"label":"\u2193", "x":15, "y":3}, {"label":"\u2192", "x":16, "y":3}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
38
keyboards/tkc/candybar/lefty/keymaps/default/keymap.c
Normal file
38
keyboards/tkc/candybar/lefty/keymaps/default/keymap.c
Normal file
@ -0,0 +1,38 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \
|
||||
MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_VOLU, RESET , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SLCK, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NLCK, KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
|
||||
KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
|
||||
};
|
||||
52
keyboards/tkc/candybar/lefty/keymaps/via/keymap.c
Normal file
52
keyboards/tkc/candybar/lefty/keymaps/via/keymap.c
Normal file
@ -0,0 +1,52 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _AL 2
|
||||
#define _LL 3
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \
|
||||
MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_VOLU, RESET , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SLCK, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NLCK, KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
|
||||
KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
|
||||
|
||||
[_AL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_VOLU, RESET , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SLCK, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NLCK, KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
|
||||
KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
|
||||
|
||||
[_LL] = LAYOUT(
|
||||
KC_P7 , KC_P8, KC_P9 , KC_VOLU, RESET , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
|
||||
KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SLCK, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \
|
||||
KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NLCK, KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
|
||||
KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
|
||||
};
|
||||
1
keyboards/tkc/candybar/lefty/keymaps/via/rules.mk
Normal file
1
keyboards/tkc/candybar/lefty/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
21
keyboards/tkc/candybar/lefty/lefty.c
Normal file
21
keyboards/tkc/candybar/lefty/lefty.c
Normal file
@ -0,0 +1,21 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "lefty.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
31
keyboards/tkc/candybar/lefty/lefty.h
Normal file
31
keyboards/tkc/candybar/lefty/lefty.h
Normal file
@ -0,0 +1,31 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
#define LAYOUT( \
|
||||
k0d, k0e, k0f, k0g, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k1d, k1e, k1f, k1g, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
|
||||
k2d, k2e, k2f, k2g, k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
|
||||
k3d, k3e, k3f, k3g, k30, k31, k32, k35, k37, k38, k39, k3a, k3b, k3c \
|
||||
) { \
|
||||
{ k00, k01 , k02, k03 , k04 , k05, k06 , k07, k08, k09, k0a, k0b , k0c, k0d, k0e, k0f, k0g } , \
|
||||
{ k10, k11 , k12, k13 , k14 , k15, k16 , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g } , \
|
||||
{ k20, KC_NO, k22, k23 , k24 , k25, k26 , k27, k28, k29, k2a, k2b , k2c, k2d, k2e, k2f, k2g } , \
|
||||
{ k30, k31 , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b , k3c, k3d, k3e, k3f, k3g } \
|
||||
}
|
||||
15
keyboards/tkc/candybar/lefty/readme.md
Normal file
15
keyboards/tkc/candybar/lefty/readme.md
Normal file
@ -0,0 +1,15 @@
|
||||
# The Key Company Candybar
|
||||
|
||||
|
||||
|
||||
The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
|
||||
|
||||
* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
|
||||
* Hardware Supported: TKC Candybar
|
||||
* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make tkc/candybar/lefty:default:dfu-util
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
24
keyboards/tkc/candybar/lefty/rules.mk
Normal file
24
keyboards/tkc/candybar/lefty/rules.mk
Normal file
@ -0,0 +1,24 @@
|
||||
# MCU name
|
||||
MCU = STM32F072
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
# EXTRAFLAGS+=-flto
|
||||
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
SERIAL_LINK_ENABLE = no
|
||||
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
171
keyboards/tkc/candybar/mcuconf.h
Normal file
171
keyboards/tkc/candybar/mcuconf.h
Normal file
@ -0,0 +1,171 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
115
keyboards/tkc/candybar/righty/config.h
Normal file
115
keyboards/tkc/candybar/righty/config.h
Normal file
@ -0,0 +1,115 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x544B //TK
|
||||
#define PRODUCT_ID 0x0002
|
||||
#define DEVICE_VER 0x0006
|
||||
#define MANUFACTURER The Key Company
|
||||
#define PRODUCT Candybar
|
||||
#define DESCRIPTION A compact staggered 40% keyboard with attached numpad
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 17
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
// #define WS2812_LED_N 2
|
||||
// #define RGBLED_NUM WS2812_LED_N
|
||||
// #define WS2812_TIM_N 2
|
||||
// #define WS2812_TIM_CH 2
|
||||
// #define PORT_WS2812 GPIOA
|
||||
// #define PIN_WS2812 1
|
||||
// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
|
||||
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
|
||||
//#define WS2812_EXTERNAL_PULLUP
|
||||
16
keyboards/tkc/candybar/righty/info.json
Normal file
16
keyboards/tkc/candybar/righty/info.json
Normal file
@ -0,0 +1,16 @@
|
||||
{
|
||||
"keyboard_name": "TKC Candybar",
|
||||
"url": "",
|
||||
"maintainer": "terrymathews",
|
||||
"width": 17,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
|
||||
{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
|
||||
{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"↑", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
|
||||
{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"←", "x":11, "y":3}, {"label":"↓", "x":12, "y":3}, {"label":"→", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
|
||||
}
|
||||
}
|
||||
}
|
||||
38
keyboards/tkc/candybar/righty/keymaps/default/keymap.c
Normal file
38
keyboards/tkc/candybar/righty/keymaps/default/keymap.c
Normal file
@ -0,0 +1,38 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT(
|
||||
KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \
|
||||
KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT(
|
||||
RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
|
||||
KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
|
||||
};
|
||||
52
keyboards/tkc/candybar/righty/keymaps/via/keymap.c
Normal file
52
keyboards/tkc/candybar/righty/keymaps/via/keymap.c
Normal file
@ -0,0 +1,52 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _AL 2
|
||||
#define _LL 3
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = LAYOUT(
|
||||
KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \
|
||||
KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT(
|
||||
RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
|
||||
KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
|
||||
|
||||
[_AL] = LAYOUT(
|
||||
RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
|
||||
KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
|
||||
|
||||
[_LL] = LAYOUT(
|
||||
RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
|
||||
KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
|
||||
KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
|
||||
};
|
||||
1
keyboards/tkc/candybar/righty/keymaps/via/rules.mk
Normal file
1
keyboards/tkc/candybar/righty/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
15
keyboards/tkc/candybar/righty/readme.md
Normal file
15
keyboards/tkc/candybar/righty/readme.md
Normal file
@ -0,0 +1,15 @@
|
||||
# The Key Company Candybar
|
||||
|
||||
|
||||
|
||||
The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
|
||||
|
||||
* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
|
||||
* Hardware Supported: TKC Candybar
|
||||
* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make tkc/candybar/righty:default:dfu-util
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
17
keyboards/tkc/candybar/righty/righty.c
Normal file
17
keyboards/tkc/candybar/righty/righty.c
Normal file
@ -0,0 +1,17 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "righty.h"
|
||||
30
keyboards/tkc/candybar/righty/righty.h
Normal file
30
keyboards/tkc/candybar/righty/righty.h
Normal file
@ -0,0 +1,30 @@
|
||||
/* Copyright 2018 Jack Humbert
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, k1d, k1e, k1f, k1g, \
|
||||
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
|
||||
k30, k31, k32, k35, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
|
||||
) { \
|
||||
{ k00, k01 , k02, k03 , k04 , k05, k06 , k07, k08, k09, k0a, k0b , k0c, k0d, k0e, k0f, k0g } , \
|
||||
{ k10, k11 , k12, k13 , k14 , k15, k16 , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g } , \
|
||||
{ k20, KC_NO, k22, k23 , k24 , k25, k26 , k27, k28, k29, k2a, k2b , k2c, k2d, k2e, k2f, k2g } , \
|
||||
{ k30, k31 , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b , k3c, k3d, k3e, k3f, k3g } \
|
||||
}
|
||||
24
keyboards/tkc/candybar/righty/rules.mk
Normal file
24
keyboards/tkc/candybar/righty/rules.mk
Normal file
@ -0,0 +1,24 @@
|
||||
# MCU name
|
||||
MCU = STM32F072
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
# EXTRAFLAGS+=-flto
|
||||
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
SERIAL_LINK_ENABLE = no
|
||||
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
17
keyboards/tkc/m0lly/README.md
Normal file
17
keyboards/tkc/m0lly/README.md
Normal file
@ -0,0 +1,17 @@
|
||||
The Key Company M0LLY
|
||||
|
||||
[TKC M0LLY](https://cdn.shopify.com/s/files/1/1679/2319/files/Molly_Terminal_1024x1024.jpg?v=1529067702)
|
||||
|
||||
|
||||
The Key Company's M0LLY keyboard is inspired by the Apple Macintosh M0110A, and utilizes the AT90USB1286 microcontroller.
|
||||
|
||||
Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
|
||||
Hardware Supported: TKC M0LLY
|
||||
Hardware Availability: [TheKey.Company](https://thekey.company)
|
||||
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make tkc/m0lly:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
183
keyboards/tkc/m0lly/config.h
Normal file
183
keyboards/tkc/m0lly/config.h
Normal file
@ -0,0 +1,183 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x544B // "TK"
|
||||
#define PRODUCT_ID 0x0004
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER The Key Company
|
||||
#define PRODUCT M0lly
|
||||
#define DESCRIPTION QMK keyboard firmware for M0lly
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 19
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
/* Row pin configuration
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F2, F1, F0, E1, E0 }
|
||||
/* Column pin configuration
|
||||
*/
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, F5, F6, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define RGB_DI_PIN D7
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 30 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 5
|
||||
#define RGBLIGHT_SAT_STEP 10
|
||||
#define RGBLIGHT_VAL_STEP 10
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define QMK_ESC_OUTPUT A0 // usually COL
|
||||
#define QMK_ESC_INPUT F4 // usually ROW
|
||||
#define QMK_LED D2 // NumLock on M0lly
|
||||
//#define QMK_SPEAKER C6
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
97
keyboards/tkc/m0lly/info.json
Normal file
97
keyboards/tkc/m0lly/info.json
Normal file
@ -0,0 +1,97 @@
|
||||
{
|
||||
"keyboard_name": "TKC M0LLY",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 19.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"label":"~", "x":0, "y":0},
|
||||
{"label":"!", "x":1, "y":0},
|
||||
{"label":"@", "x":2, "y":0},
|
||||
{"label":"#", "x":3, "y":0},
|
||||
{"label":"$", "x":4, "y":0},
|
||||
{"label":"%", "x":5, "y":0},
|
||||
{"label":"^", "x":6, "y":0},
|
||||
{"label":"&", "x":7, "y":0},
|
||||
{"label":"*", "x":8, "y":0},
|
||||
{"label":"(", "x":9, "y":0},
|
||||
{"label":")", "x":10, "y":0},
|
||||
{"label":"_", "x":11, "y":0},
|
||||
{"label":"+", "x":12, "y":0},
|
||||
{"label":"Bksp", "x":13, "y":0},
|
||||
{"x":14, "y":0},
|
||||
{"label":"Num", "x":15.5, "y":0},
|
||||
{"label":"/", "x":16.5, "y":0},
|
||||
{"label":"*", "x":17.5, "y":0},
|
||||
{"label":"-", "x":18.5, "y":0},
|
||||
{"label":"Tab", "x":0, "y":1, "w":1.5},
|
||||
{"label":"Q", "x":1.5, "y":1},
|
||||
{"label":"W", "x":2.5, "y":1},
|
||||
{"label":"E", "x":3.5, "y":1},
|
||||
{"label":"R", "x":4.5, "y":1},
|
||||
{"label":"T", "x":5.5, "y":1},
|
||||
{"label":"Y", "x":6.5, "y":1},
|
||||
{"label":"U", "x":7.5, "y":1},
|
||||
{"label":"I", "x":8.5, "y":1},
|
||||
{"label":"O", "x":9.5, "y":1},
|
||||
{"label":"P", "x":10.5, "y":1},
|
||||
{"label":"{", "x":11.5, "y":1},
|
||||
{"label":"}", "x":12.5, "y":1},
|
||||
{"label":"|", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"7", "x":15.5, "y":1},
|
||||
{"label":"8", "x":16.5, "y":1},
|
||||
{"label":"9", "x":17.5, "y":1},
|
||||
{"x":18.5, "y":1},
|
||||
{"label":"Caps Lock", "x":0, "y":2, "w":1.75},
|
||||
{"label":"A", "x":1.75, "y":2},
|
||||
{"label":"S", "x":2.75, "y":2},
|
||||
{"label":"D", "x":3.75, "y":2},
|
||||
{"label":"F", "x":4.75, "y":2},
|
||||
{"label":"G", "x":5.75, "y":2},
|
||||
{"label":"H", "x":6.75, "y":2},
|
||||
{"label":"J", "x":7.75, "y":2},
|
||||
{"label":"K", "x":8.75, "y":2},
|
||||
{"label":"L", "x":9.75, "y":2},
|
||||
{"label":":", "x":10.75, "y":2},
|
||||
{"label":"\"", "x":11.75, "y":2},
|
||||
{"label":"ISO ~", "x":12.75, "y":2},
|
||||
{"label":"Enter", "x":13.75, "y":2, "w":1.25},
|
||||
{"label":"4", "x":15.5, "y":2},
|
||||
{"label":"5", "x":16.5, "y":2},
|
||||
{"label":"6", "x":17.5, "y":2},
|
||||
{"label":"+", "x":18.5, "y":2},
|
||||
{"label":"Shift", "x":0, "y":3, "w":1.25},
|
||||
{"x":1.25, "y":3},
|
||||
{"label":"Z", "x":2.25, "y":3},
|
||||
{"label":"X", "x":3.25, "y":3},
|
||||
{"label":"C", "x":4.25, "y":3},
|
||||
{"label":"V", "x":5.25, "y":3},
|
||||
{"label":"B", "x":6.25, "y":3},
|
||||
{"label":"N", "x":7.25, "y":3},
|
||||
{"label":"M", "x":8.25, "y":3},
|
||||
{"label":"<", "x":9.25, "y":3},
|
||||
{"label":">", "x":10.25, "y":3},
|
||||
{"label":"?", "x":11.25, "y":3},
|
||||
{"label":"Shift", "x":12.25, "y":3, "w":1.75},
|
||||
{"x":14, "y":3},
|
||||
{"label":"1", "x":15.5, "y":3},
|
||||
{"label":"2", "x":16.5, "y":3},
|
||||
{"label":"3", "x":17.5, "y":3},
|
||||
{"x":18.5, "y":3},
|
||||
{"label":"Ctrl", "x":0, "y":4, "w":1.25},
|
||||
{"label":"Win", "x":1.25, "y":4, "w":1.25},
|
||||
{"label":"Alt", "x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"label":"Alt", "x":10, "y":4, "w":1.25},
|
||||
{"label":"Win", "x":11.25, "y":4, "w":1.25},
|
||||
{"label":"FN", "x":12.5, "y":4, "w":1.25},
|
||||
{"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
|
||||
{"label":"0", "x":15.5, "y":4},
|
||||
{"x":16.5, "y":4},
|
||||
{"label":".", "x":17.5, "y":4},
|
||||
{"label":"Ent", "x":18.5, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
94
keyboards/tkc/m0lly/keymaps/default/keymap.c
Normal file
94
keyboards/tkc/m0lly/keymaps/default/keymap.c
Normal file
@ -0,0 +1,94 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
*
|
||||
* ,-----------------------------------------------------------. .-------------------.
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | |
|
||||
* |-----------------------------------------------------------| |--------------| + |
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | 1 | 2 | 3 | Ent|
|
||||
* |-----------------------------------------------------------| |--------------| |
|
||||
* |Ctrl|Gui |Alt | Space | Alt | Win |FN |Ctr | | 0 | . | |
|
||||
* `-----------------------------------------------------------' '-------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT_all(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, XXXXXXX, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXXXX, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, MO(FUNCTION), KC_RCTL, KC_P0, XXXXXXX, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Keymap FUNCTION: (Function Layer)
|
||||
*
|
||||
* ,-----------------------------------------------------------. .-------------------.
|
||||
* | | | | | | | | | | | | | | RESET | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp| | | | | | | |
|
||||
* |-----------------------------------------------------------| |--------------| |
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------' '-------------------'
|
||||
*/
|
||||
[FUNCTION] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, MO(FUNCTION), _______, _______, XXXXXXX, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("M0lly\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
116
keyboards/tkc/m0lly/keymaps/via/keymap.c
Normal file
116
keyboards/tkc/m0lly/keymaps/via/keymap.c
Normal file
@ -0,0 +1,116 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
ALTERNATE,
|
||||
LAST,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
*
|
||||
* ,-----------------------------------------------------------. .-------------------.
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | |
|
||||
* |-----------------------------------------------------------| |--------------| + |
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | 1 | 2 | 3 | Ent|
|
||||
* |-----------------------------------------------------------| |--------------| |
|
||||
* |Ctrl|Gui |Alt | Space | Alt | Win |FN |Ctr | | 0 | . | |
|
||||
* `-----------------------------------------------------------' '-------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT_all(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, XXXXXXX,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXXXX, KC_P1, KC_P2, KC_P3, XXXXXXX,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, MO(FUNCTION), KC_RCTL, KC_P0, XXXXXXX, KC_PDOT, KC_PENT
|
||||
),
|
||||
/* Keymap FUNCTION: (Function Layer)
|
||||
*
|
||||
* ,-----------------------------------------------------------. .-------------------.
|
||||
* | | | | | | | | | | | | | | RESET | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp| | | | | | | |
|
||||
* |-----------------------------------------------------------| |--------------| |
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------' '-------------------'
|
||||
*/
|
||||
[FUNCTION] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______,
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, MO(FUNCTION), _______, _______, XXXXXXX, _______, _______
|
||||
),
|
||||
[ALTERNATE] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______,
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, MO(FUNCTION), _______, _______, XXXXXXX, _______, _______
|
||||
),
|
||||
[LAST] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______,
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX, _______, _______, _______, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, _______, MO(FUNCTION), _______, _______, XXXXXXX, _______, _______
|
||||
),
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("M0lly\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
case ALTERNATE:
|
||||
oled_write_P(PSTR("Alternate\n"), false);
|
||||
break;
|
||||
case LAST:
|
||||
oled_write_P(PSTR("Last\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
1
keyboards/tkc/m0lly/keymaps/via/rules.mk
Normal file
1
keyboards/tkc/m0lly/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
76
keyboards/tkc/m0lly/m0lly.c
Normal file
76
keyboards/tkc/m0lly/m0lly.c
Normal file
@ -0,0 +1,76 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "m0lly.h"
|
||||
#include "led.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
setPinInputHigh(D0);
|
||||
setPinInputHigh(D1);
|
||||
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
led_init_ports();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT
|
||||
DDRB |= (1<<7); // OUT
|
||||
PORTB |= (1<<7);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// led_set_user(usb_led);
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// Turn numlock on
|
||||
PORTD |= (1<<2);
|
||||
} else {
|
||||
// Turn numlock off
|
||||
PORTD &= ~(1<<2);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTD |= (1<<3);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTD &= ~(1<<3);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// Turn scrolllock on
|
||||
PORTD |= (1<<4);
|
||||
} else {
|
||||
// Turn scrolllock off
|
||||
PORTD &= ~(1<<4);
|
||||
}
|
||||
}
|
||||
32
keyboards/tkc/m0lly/m0lly.h
Normal file
32
keyboards/tkc/m0lly/m0lly.h
Normal file
@ -0,0 +1,32 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, K1G, K1H, K1I, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, K2H, K2I, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, K3H, K3I, \
|
||||
K40, K41, K42, K45, K49, K4B, K4C, K4D, K4F, K4G, K4H, K4I \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, K1F, K1G, K1H, K1I }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F, K2G, K2H, K2I }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, K3F, K3G, K3H, K3I }, \
|
||||
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, KC_NO, K4B, K4C, K4D, KC_NO, K4F, K4G, K4H, K4I } \
|
||||
}
|
||||
32
keyboards/tkc/m0lly/rules.mk
Normal file
32
keyboards/tkc/m0lly/rules.mk
Normal file
@ -0,0 +1,32 @@
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
OLED_DRIVER_ENABLE = yes
|
||||
17
keyboards/tkc/tkc1800/README.md
Normal file
17
keyboards/tkc/tkc1800/README.md
Normal file
@ -0,0 +1,17 @@
|
||||
The Key Company TKC1800
|
||||
|
||||
[TKC1800 Image Gallery](https://imgur.com/a/Xlttp)
|
||||
|
||||
|
||||
The Key Company TKC1800 is a Cherry 1800 form factor replacement PCB utilizing the AT90USB1286 microcontroller.
|
||||
|
||||
Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
|
||||
Hardware Supported: TKC1800 PCB
|
||||
Hardware Availability: [TheKey.Company](https://thekey.company/collections/tkc-1800)
|
||||
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make tkc/tkc1800:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
183
keyboards/tkc/tkc1800/config.h
Normal file
183
keyboards/tkc/tkc1800/config.h
Normal file
@ -0,0 +1,183 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x544B // "TK"
|
||||
#define PRODUCT_ID 0x0001
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER The Key Company
|
||||
#define PRODUCT TKC1800
|
||||
#define DESCRIPTION QMK keyboard firmware for TKC1800
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 7
|
||||
#define MATRIX_COLS 19
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
/* Row pin configuration
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F4, F3, F2, F1, F0, E1, E0 }
|
||||
/* Column pin configuration
|
||||
*/
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, F5, F6, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define RGB_DI_PIN D7
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 30 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 5
|
||||
#define RGBLIGHT_SAT_STEP 10
|
||||
#define RGBLIGHT_VAL_STEP 10
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define QMK_ESC_OUTPUT A0 // usually COL
|
||||
#define QMK_ESC_INPUT F4 // usually ROW
|
||||
#define QMK_LED D2 // NumLock on TKC1800
|
||||
//#define QMK_SPEAKER C6
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
121
keyboards/tkc/tkc1800/info.json
Normal file
121
keyboards/tkc/tkc1800/info.json
Normal file
@ -0,0 +1,121 @@
|
||||
{
|
||||
"keyboard_name": "TKC1800",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 19.5,
|
||||
"height": 7.25,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"key_count": 107,
|
||||
"layout": [
|
||||
{ "label": "Esc", "x": 0, "y": 0 },
|
||||
{ "label": "F1", "x": 1.25, "y": 0 },
|
||||
{ "label": "F2", "x": 2.25, "y": 0 },
|
||||
{ "label": "F3", "x": 3.25, "y": 0 },
|
||||
{ "label": "F4", "x": 4.25, "y": 0 },
|
||||
{ "label": "F5", "x": 5.5, "y": 0 },
|
||||
{ "label": "F6", "x": 6.5, "y": 0 },
|
||||
{ "label": "F7", "x": 7.5, "y": 0 },
|
||||
{ "label": "F8", "x": 8.5, "y": 0 },
|
||||
{ "label": "F9", "x": 9.75, "y": 0 },
|
||||
{ "label": "F10", "x": 10.75, "y": 0 },
|
||||
{ "label": "F11", "x": 11.75, "y": 0 },
|
||||
{ "label": "F12", "x": 12.75, "y": 0 },
|
||||
{ "label": "Insert", "x": 15.5, "y": 0 },
|
||||
{ "label": "Home", "x": 16.5, "y": 0 },
|
||||
{ "label": "Page Up", "x": 17.5, "y": 0 },
|
||||
{ "label": "Print Screen", "x": 18.5, "y": 0 },
|
||||
{ "label": "Delete", "x": 15.5, "y": 1 },
|
||||
{ "label": "End", "x": 16.5, "y": 1 },
|
||||
{ "label": "Page Down", "x": 17.5, "y": 1 },
|
||||
{ "label": "Scroll Lock", "x": 18.5, "y": 1 },
|
||||
{ "label": "`", "x": 0, "y": 2 },
|
||||
{ "label": "1", "x": 1, "y": 2 },
|
||||
{ "label": "2", "x": 2, "y": 2 },
|
||||
{ "label": "3", "x": 3, "y": 2 },
|
||||
{ "label": "4", "x": 4, "y": 2 },
|
||||
{ "label": "5", "x": 5, "y": 2 },
|
||||
{ "label": "6", "x": 6, "y": 2 },
|
||||
{ "label": "7", "x": 7, "y": 2 },
|
||||
{ "label": "8", "x": 8, "y": 2 },
|
||||
{ "label": "9", "x": 9, "y": 2 },
|
||||
{ "label": "0", "x": 10, "y": 2 },
|
||||
{ "label": "-", "x": 11, "y": 2 },
|
||||
{ "label": "=", "x": 12, "y": 2 },
|
||||
{ "label": "Backspace", "x": 13, "y": 2 },
|
||||
{ "label": "Backspace_Right", "x": 14, "y": 2 },
|
||||
{ "label": "Num Lock", "x": 15.5, "y": 2 },
|
||||
{ "label": "/", "x": 16.5, "y": 2 },
|
||||
{ "label": "*", "x": 17.5, "y": 2 },
|
||||
{ "label": "Pause", "x": 18.5, "y": 2 },
|
||||
{ "label": "Tab", "x": 0, "y": 3, "w": 1.5 },
|
||||
{ "label": "Q", "x": 1.5, "y": 3 },
|
||||
{ "label": "W", "x": 2.5, "y": 3 },
|
||||
{ "label": "E", "x": 3.5, "y": 3 },
|
||||
{ "label": "R", "x": 4.5, "y": 3 },
|
||||
{ "label": "T", "x": 5.5, "y": 3 },
|
||||
{ "label": "Y", "x": 6.5, "y": 3 },
|
||||
{ "label": "U", "x": 7.5, "y": 3 },
|
||||
{ "label": "I", "x": 8.5, "y": 3 },
|
||||
{ "label": "O", "x": 9.5, "y": 3 },
|
||||
{ "label": "P", "x": 10.5, "y": 3 },
|
||||
{ "label": "[", "x": 11.5, "y": 3 },
|
||||
{ "label": "]", "x": 12.5, "y": 3 },
|
||||
{ "label": "\\", "x": 13.5, "y": 3, "w": 1.5 },
|
||||
{ "label": "7", "x": 15.5, "y": 3 },
|
||||
{ "label": "8", "x": 16.5, "y": 3 },
|
||||
{ "label": "9", "x": 17.5, "y": 3 },
|
||||
{ "label": "-", "x": 18.5, "y": 3 },
|
||||
{ "label": "Caps Lock", "x": 0, "y": 4, "w": 1.75 },
|
||||
{ "label": "A", "x": 1.75, "y": 4 },
|
||||
{ "label": "S", "x": 2.75, "y": 4 },
|
||||
{ "label": "D", "x": 3.75, "y": 4 },
|
||||
{ "label": "F", "x": 4.75, "y": 4 },
|
||||
{ "label": "G", "x": 5.75, "y": 4 },
|
||||
{ "label": "H", "x": 6.75, "y": 4 },
|
||||
{ "label": "J", "x": 7.75, "y": 4 },
|
||||
{ "label": "K", "x": 8.75, "y": 4 },
|
||||
{ "label": "L", "x": 9.75, "y": 4 },
|
||||
{ "label": ";", "x": 10.75, "y": 4 },
|
||||
{ "label": "'", "x": 11.75, "y": 4 },
|
||||
{ "label": "ISO Hash", "x": 12.75, "y": 4 },
|
||||
{ "label": "Enter", "x": 13.75, "y": 4, "w": 1.25 },
|
||||
{ "label": "4", "x": 15.5, "y": 4 },
|
||||
{ "label": "5", "x": 16.5, "y": 4 },
|
||||
{ "label": "6", "x": 17.5, "y": 4 },
|
||||
{ "label": "+", "x": 18.5, "y": 4 },
|
||||
{ "label": "Shift", "x": 0, "y": 5, "w": 1.25 },
|
||||
{ "label": "ISO Backslash", "x": 1.25, "y": 5 },
|
||||
{ "label": "Z", "x": 2.25, "y": 5 },
|
||||
{ "label": "X", "x": 3.25, "y": 5 },
|
||||
{ "label": "C", "x": 4.25, "y": 5 },
|
||||
{ "label": "V", "x": 5.25, "y": 5 },
|
||||
{ "label": "B", "x": 6.25, "y": 5 },
|
||||
{ "label": "N", "x": 7.25, "y": 5 },
|
||||
{ "label": "M", "x": 8.25, "y": 5 },
|
||||
{ "label": ",", "x": 9.25, "y": 5 },
|
||||
{ "label": ".", "x": 10.25, "y": 5 },
|
||||
{ "label": "/", "x": 11.25, "y": 5 },
|
||||
{ "label": "Shift", "x": 12.25, "y": 5, "w": 1.75 },
|
||||
{ "label": "Up", "x": 14.25, "y": 5.25 },
|
||||
{ "label": "1", "x": 15.5, "y": 5 },
|
||||
{ "label": "2", "x": 16.5, "y": 5 },
|
||||
{ "label": "3", "x": 17.5, "y": 5 },
|
||||
{ "label": "Enter_Top", "x": 18.5, "y": 5 },
|
||||
{ "label": "Ctrl", "x": 0, "y": 6, "w": 1.25 },
|
||||
{ "label": "GUI", "x": 1.25, "y": 6, "w": 1.25 },
|
||||
{ "label": "Alt", "x": 2.5, "y": 6, "w": 1.25 },
|
||||
{ "label": "Space", "x": 3.75, "y": 6, "w": 6.25 },
|
||||
{ "label": "Alt", "x": 10, "y": 6 },
|
||||
{ "label": "Fn", "x": 11, "y": 6 },
|
||||
{ "label": "Ctrl", "x": 12, "y": 6 },
|
||||
{ "label": "Left", "x": 13.25, "y": 6.25 },
|
||||
{ "label": "Down", "x": 14.25, "y": 6.25 },
|
||||
{ "label": "Right", "x": 15.25, "y": 6.25 },
|
||||
{ "label": "0", "x": 16.5, "y": 6 },
|
||||
{ "label": ".", "x": 17.5, "y": 6 },
|
||||
{ "label": "Enter", "x": 18.5, "y": 6 }
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
106
keyboards/tkc/tkc1800/keymaps/default/keymap.c
Normal file
106
keyboards/tkc/tkc1800/keymaps/default/keymap.c
Normal file
@ -0,0 +1,106 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Keymap FUNCTION: (Function Layer)
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* | | | | | | | | | | | | | | | | | | | | |
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* | | | | |
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | | | | | | | | | | | | | | RESET | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* | |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp| | | | | | | |
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* | | | | | | | | | | | | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[FUNCTION] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("TKC1800\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
177
keyboards/tkc/tkc1800/keymaps/smt/keymap.c
Normal file
177
keyboards/tkc/tkc1800/keymaps/smt/keymap.c
Normal file
@ -0,0 +1,177 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Custom macros
|
||||
#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl
|
||||
#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
|
||||
#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
QWERTY = 0,
|
||||
COLEMAK,
|
||||
DVORAK,
|
||||
FUNCTION,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap QWERTY: (Qwerty Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui|Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[QWERTY] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Keymap COLEMAK: (Colemak Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| R| S| T| D| H| N| E| I| O| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| K| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui|Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[COLEMAK] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Keymap DVORAK: (Dvorak Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| \| ~ | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| BS | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| O| E| U| I| D| H| T| N| S| -|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | ;| Q| J| K| X| B| M| W| V| Z|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui|Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[DVORAK] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
[FUNCTION] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
_______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, _______, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case COLEMAK:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(COLEMAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case DVORAK:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(DVORAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("TKC1800\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case QWERTY:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case COLEMAK:
|
||||
oled_write_P(PSTR("Colemak\n"), false);
|
||||
break;
|
||||
case DVORAK:
|
||||
oled_write_P(PSTR("Dvorak\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
130
keyboards/tkc/tkc1800/keymaps/via/keymap.c
Normal file
130
keyboards/tkc/tkc1800/keymaps/via/keymap.c
Normal file
@ -0,0 +1,130 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
ALTERNATE,
|
||||
LAST,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Keymap FUNCTION: (Function Layer)
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* | | | | | | | | | | | | | | | | | | | | |
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* | | | | |
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | | | | | | | | | | | | | | RESET | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* | |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp| | | | | | | |
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* | | | | | | | | | | | | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[FUNCTION] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
[ALTERNATE] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
[LAST] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("TKC1800\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
case ALTERNATE:
|
||||
oled_write_P(PSTR("Alternate\n"), false);
|
||||
break;
|
||||
case LAST:
|
||||
oled_write_P(PSTR("Last\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
1
keyboards/tkc/tkc1800/keymaps/via/rules.mk
Normal file
1
keyboards/tkc/tkc1800/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
88
keyboards/tkc/tkc1800/keymaps/wkl/keymap.c
Normal file
88
keyboards/tkc/tkc1800/keymaps/wkl/keymap.c
Normal file
@ -0,0 +1,88 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl | Alt | Space | Fn |Ctrl |Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LALT, XXXXXXX, KC_SPC, XXXXXXX, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
[FUNCTION] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, XXXXXXX, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("TKC1800\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
88
keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c
Normal file
88
keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c
Normal file
@ -0,0 +1,88 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
|
||||
enum {
|
||||
BASE = 0,
|
||||
FUNCTION,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap BASE: (Base Layer) Default Layer
|
||||
* ,-------------------------------------------------------. ,-------------------.
|
||||
* |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| |Ins |Home|PgUp|PrSc|
|
||||
* `-------------------------------------------------------' |-------------------|
|
||||
* |Del |End |PgDn|ScrL|
|
||||
* ,-----------------------------------------------------------. |-------------------|
|
||||
* | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NumL| / | * |Paus|
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | 7 | 8 | 9 | - |
|
||||
* |-----------------------------------------------------------| |-------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4 | 5 | 6 | + |
|
||||
* |-----------------------------------------------------------' |-------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | 1 | 2 | 3 | Ent|
|
||||
* |--------------------------------------------------------'----`--------------| |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui|Ctr|Left |Down|Rght| 0 | . | |
|
||||
* `---------------------------------------------------------------------------------'
|
||||
*/
|
||||
[BASE] = LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \
|
||||
KC_DEL, KC_END, KC_PGDN, KC_SLCK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||
LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
[FUNCTION] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, XXXXXXX, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \
|
||||
_______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
oled_write_P(PSTR("TKC1800\n"),false);
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case BASE:
|
||||
oled_write_P(PSTR("Base\n"), false);
|
||||
break;
|
||||
case FUNCTION:
|
||||
oled_write_P(PSTR("Function\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
1
keyboards/tkc/tkc1800/keymaps/yanfali/rules.mk
Normal file
1
keyboards/tkc/tkc1800/keymaps/yanfali/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
OLED_DRIVER_ENABLE = no
|
||||
33
keyboards/tkc/tkc1800/rules.mk
Normal file
33
keyboards/tkc/tkc1800/rules.mk
Normal file
@ -0,0 +1,33 @@
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
OLED_DRIVER_ENABLE = yes
|
||||
76
keyboards/tkc/tkc1800/tkc1800.c
Normal file
76
keyboards/tkc/tkc1800/tkc1800.c
Normal file
@ -0,0 +1,76 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "tkc1800.h"
|
||||
#include "led.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
setPinInputHigh(D0);
|
||||
setPinInputHigh(D1);
|
||||
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
led_init_ports();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT
|
||||
DDRB |= (1<<7); // OUT
|
||||
PORTB |= (1<<7);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// led_set_user(usb_led);
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// Turn numlock on
|
||||
PORTD |= (1<<2);
|
||||
} else {
|
||||
// Turn numlock off
|
||||
PORTD &= ~(1<<2);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTD |= (1<<3);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTD &= ~(1<<3);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// Turn scrolllock on
|
||||
PORTD |= (1<<4);
|
||||
} else {
|
||||
// Turn scrolllock off
|
||||
PORTD &= ~(1<<4);
|
||||
}
|
||||
}
|
||||
36
keyboards/tkc/tkc1800/tkc1800.h
Normal file
36
keyboards/tkc/tkc1800/tkc1800.h
Normal file
@ -0,0 +1,36 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0G, K0H, K0I, \
|
||||
K1F, K1G, K1H, K1I, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, K3H, K3I, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, K4G, K4H, K4I, \
|
||||
K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5F, K5G, K5H, K5I, \
|
||||
K60, K61, K62, K65, K69, K6A, K6B, K6C, K6D, K6E, K6G, K6H, K6I \
|
||||
) { \
|
||||
{ K00, KC_NO, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO, K0F, K0G, K0H, K0I }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K1F, K1G, K1H, K1I }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, K3F, K3G, K3H, K3I }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, KC_NO, K4F, K4G, K4H, K4I }, \
|
||||
{ K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, KC_NO, K5F, K5G, K5H, K5I }, \
|
||||
{ K60, K61, K62, KC_NO, KC_NO, K65, KC_NO, KC_NO, KC_NO, K69, K6A, K6B, K6C, K6D, K6E, KC_NO, K6G, K6H, K6I } \
|
||||
}
|
||||
Reference in New Issue
Block a user