Remove HD44780 References, Part 1 (#9052)
* remove HD44780_ENABLE rules: 0-9, A-B * remove HD44780_ENABLE config: 0-9, A-B
This commit is contained in:
parent
12946d0565
commit
aaf58155c7
@ -189,31 +189,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
EXTRAFLAGS += -flto
|
EXTRAFLAGS += -flto
|
||||||
|
|
||||||
LAYOUTS = 60_ansi
|
LAYOUTS = 60_ansi
|
||||||
|
@ -219,34 +219,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -31,6 +31,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x4 numpad_4x4
|
LAYOUTS = ortho_4x4 numpad_4x4
|
||||||
|
@ -197,31 +197,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enable generic behavior for split boards
|
# Enable generic behavior for split boards
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
@ -224,34 +224,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -164,31 +164,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -29,6 +29,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 ortho_4x16
|
LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 ortho_4x16
|
||||||
|
@ -173,31 +173,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -29,6 +29,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_5x5 ortho_5x10 ortho_5x15
|
LAYOUTS = ortho_5x5 ortho_5x10 ortho_5x15
|
||||||
|
@ -198,31 +198,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enable generic behavior for split boards
|
# Enable generic behavior for split boards
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
@ -198,31 +198,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enable generic behavior for split boards
|
# Enable generic behavior for split boards
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
@ -11,7 +11,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
TAP_DANCE_ENABLE = no
|
TAP_DANCE_ENABLE = no
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend (it uses the same timer as BACKLIGHT_ENABLE)
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend (it uses the same timer as BACKLIGHT_ENABLE)
|
||||||
|
|
||||||
|
@ -212,34 +212,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enable generic behavior for split boards
|
# Enable generic behavior for split boards
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
@ -154,34 +154,6 @@
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_5x15
|
LAYOUTS = ortho_5x15
|
||||||
DEFAULT_FOLDER = 40percentclub/i75/promicro
|
DEFAULT_FOLDER = 40percentclub/i75/promicro
|
||||||
|
@ -208,32 +208,6 @@
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -186,31 +186,3 @@
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12
|
LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12
|
||||||
|
@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
UNICODEMAP_ENABLE = yes
|
UNICODEMAP_ENABLE = yes
|
||||||
ENCODER_ENABLE = yes
|
ENCODER_ENABLE = yes
|
||||||
DIP_SWITCH_ENABLE = yes
|
DIP_SWITCH_ENABLE = yes
|
||||||
|
@ -202,34 +202,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,5 +30,4 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
ENCODER_ENABLE = yes # Enable support for rotary encoders
|
ENCODER_ENABLE = yes # Enable support for rotary encoders
|
||||||
|
@ -19,7 +19,6 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||||
|
@ -217,34 +217,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LTO_ENABLE = yes
|
LTO_ENABLE = yes
|
||||||
|
@ -19,7 +19,6 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||||
|
@ -228,34 +228,6 @@ B0, which is unconnected on the PCB
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -20,6 +20,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x12
|
LAYOUTS = ortho_4x12
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -211,34 +211,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -216,34 +216,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
USE_I2C = no # I2C for split communication
|
USE_I2C = no # I2C for split communication
|
||||||
CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
|
CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
|
||||||
# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
|
# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
|
||||||
|
@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
SPLIT_KEYBOARD = yes # Split keyboard
|
SPLIT_KEYBOARD = yes # Split keyboard
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb
|
LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb
|
||||||
|
@ -218,34 +218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -212,34 +212,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_5x4
|
LAYOUTS = ortho_5x4
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -188,31 +188,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -212,34 +212,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,5 +30,4 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
EXTRAFLAGS += -flto
|
EXTRAFLAGS += -flto
|
||||||
|
@ -218,34 +218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
#define BOOTMAGIC_LITE_ROW 0
|
#define BOOTMAGIC_LITE_ROW 0
|
||||||
#define BOOTMAGIC_LITE_COLUMN 0
|
#define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -218,34 +218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
#define BOOTMAGIC_LITE_ROW 0
|
#define BOOTMAGIC_LITE_ROW 0
|
||||||
#define BOOTMAGIC_LITE_COLUMN 0
|
#define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_6x4 numpad_6x4
|
LAYOUTS = ortho_6x4 numpad_6x4
|
||||||
|
@ -216,34 +216,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = numpad_5x4
|
LAYOUTS = numpad_5x4
|
||||||
|
@ -211,34 +211,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = numpad_5x4
|
LAYOUTS = numpad_5x4
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = numpad_5x4
|
LAYOUTS = numpad_5x4
|
||||||
|
|
||||||
|
@ -209,34 +209,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -209,34 +209,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
OLED_DRIVER_ENABLE = yes
|
OLED_DRIVER_ENABLE = yes
|
||||||
CUSTOM_MATRIX = yes
|
CUSTOM_MATRIX = yes
|
||||||
|
|
||||||
|
@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
UNICODE_ENABLE = yes # Unicode
|
UNICODE_ENABLE = yes # Unicode
|
||||||
|
@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
@ -220,34 +220,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
@ -17,6 +17,5 @@ UNICODE_ENABLE = yes # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = atreus/astar
|
DEFAULT_FOLDER = atreus/astar
|
||||||
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = 65_iso_blocker
|
LAYOUTS = 65_iso_blocker
|
||||||
|
@ -188,31 +188,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -217,34 +217,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = tkl_ansi
|
LAYOUTS = tkl_ansi
|
||||||
|
@ -218,34 +218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = bat43/rev2
|
DEFAULT_FOLDER = bat43/rev2
|
||||||
|
@ -13,4 +13,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
|||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
|
@ -213,34 +213,6 @@
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x4
|
LAYOUTS = ortho_4x4
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
RGB_MATRIX_ENABLE = WS2812
|
RGB_MATRIX_ENABLE = WS2812
|
||||||
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
||||||
|
|
||||||
|
@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -189,34 +189,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
@ -210,34 +210,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,5 +30,4 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
OLED_DRIVER_ENABLE = yes
|
OLED_DRIVER_ENABLE = yes
|
||||||
|
@ -210,34 +210,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
/*
|
|
||||||
* HD44780 LCD Display Configuration
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define LCD_LINES 2 //< number of visible lines of the display
|
|
||||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
|
||||||
|
|
||||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
|
||||||
|
|
||||||
#if LCD_IO_MODE
|
|
||||||
#define LCD_PORT PORTB //< port for the LCD lines
|
|
||||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
|
||||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
|
||||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
|
||||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
|
||||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
|
||||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
|
||||||
#define LCD_RS_PIN 3 //< pin for RS line
|
|
||||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
|
||||||
#define LCD_RW_PIN 2 //< pin for RW line
|
|
||||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
|
||||||
#define LCD_E_PIN 1 //< pin for Enable line
|
|
||||||
#endif
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Bootmagic Lite key configuration */
|
/* Bootmagic Lite key configuration */
|
||||||
// #define BOOTMAGIC_LITE_ROW 0
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
@ -30,5 +30,4 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
OLED_DRIVER_ENABLE = yes
|
OLED_DRIVER_ENABLE = yes
|
||||||
|
@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode
|
|||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = business_card/beta
|
DEFAULT_FOLDER = business_card/beta
|
||||||
|
Loading…
Reference in New Issue
Block a user