Move USB Host Shield and Arduino core to lib/ (#13973)
This commit is contained in:
Ryan
GitHub
428
lib/usbhost/arduino-1.0.1/cores/arduino/HardwareSerial.cpp
Normal file
428
lib/usbhost/arduino-1.0.1/cores/arduino/HardwareSerial.cpp
Normal file
@ -0,0 +1,428 @@
|
||||
/*
|
||||
HardwareSerial.cpp - Hardware serial library for Wiring
|
||||
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Modified 23 November 2006 by David A. Mellis
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
*/
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <inttypes.h>
|
||||
#include "Arduino.h"
|
||||
#include "wiring_private.h"
|
||||
|
||||
// this next line disables the entire HardwareSerial.cpp,
|
||||
// this is so I can support Attiny series and any other chip without a uart
|
||||
#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
|
||||
|
||||
#include "HardwareSerial.h"
|
||||
|
||||
// Define constants and variables for buffering incoming serial data. We're
|
||||
// using a ring buffer (I think), in which head is the index of the location
|
||||
// to which to write the next incoming character and tail is the index of the
|
||||
// location from which to read.
|
||||
#if (RAMEND < 1000)
|
||||
#define SERIAL_BUFFER_SIZE 16
|
||||
#else
|
||||
#define SERIAL_BUFFER_SIZE 64
|
||||
#endif
|
||||
|
||||
struct ring_buffer
|
||||
{
|
||||
unsigned char buffer[SERIAL_BUFFER_SIZE];
|
||||
volatile unsigned int head;
|
||||
volatile unsigned int tail;
|
||||
};
|
||||
|
||||
#if defined(USBCON)
|
||||
ring_buffer rx_buffer = { { 0 }, 0, 0};
|
||||
ring_buffer tx_buffer = { { 0 }, 0, 0};
|
||||
#endif
|
||||
#if defined(UBRRH) || defined(UBRR0H)
|
||||
ring_buffer rx_buffer = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR1H)
|
||||
ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer1 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR2H)
|
||||
ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer2 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR3H)
|
||||
ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer3 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
|
||||
inline void store_char(unsigned char c, ring_buffer *buffer)
|
||||
{
|
||||
int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
// if we should be storing the received character into the location
|
||||
// just before the tail (meaning that the head would advance to the
|
||||
// current location of the tail), we're about to overflow the buffer
|
||||
// and so we don't write the character or advance the head.
|
||||
if (i != buffer->tail) {
|
||||
buffer->buffer[buffer->head] = c;
|
||||
buffer->head = i;
|
||||
}
|
||||
}
|
||||
|
||||
#if !defined(USART0_RX_vect) && defined(USART1_RX_vect)
|
||||
// do nothing - on the 32u4 the first USART is USART1
|
||||
#else
|
||||
#if !defined(USART_RX_vect) && !defined(SIG_USART0_RECV) && \
|
||||
!defined(SIG_UART0_RECV) && !defined(USART0_RX_vect) && \
|
||||
!defined(SIG_UART_RECV)
|
||||
#error "Don't know what the Data Received vector is called for the first UART"
|
||||
#else
|
||||
void serialEvent() __attribute__((weak));
|
||||
void serialEvent() {}
|
||||
#define serialEvent_implemented
|
||||
#if defined(USART_RX_vect)
|
||||
SIGNAL(USART_RX_vect)
|
||||
#elif defined(SIG_USART0_RECV)
|
||||
SIGNAL(SIG_USART0_RECV)
|
||||
#elif defined(SIG_UART0_RECV)
|
||||
SIGNAL(SIG_UART0_RECV)
|
||||
#elif defined(USART0_RX_vect)
|
||||
SIGNAL(USART0_RX_vect)
|
||||
#elif defined(SIG_UART_RECV)
|
||||
SIGNAL(SIG_UART_RECV)
|
||||
#endif
|
||||
{
|
||||
#if defined(UDR0)
|
||||
unsigned char c = UDR0;
|
||||
#elif defined(UDR)
|
||||
unsigned char c = UDR;
|
||||
#else
|
||||
#error UDR not defined
|
||||
#endif
|
||||
store_char(c, &rx_buffer);
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(USART1_RX_vect)
|
||||
void serialEvent1() __attribute__((weak));
|
||||
void serialEvent1() {}
|
||||
#define serialEvent1_implemented
|
||||
SIGNAL(USART1_RX_vect)
|
||||
{
|
||||
unsigned char c = UDR1;
|
||||
store_char(c, &rx_buffer1);
|
||||
}
|
||||
#elif defined(SIG_USART1_RECV)
|
||||
#error SIG_USART1_RECV
|
||||
#endif
|
||||
|
||||
#if defined(USART2_RX_vect) && defined(UDR2)
|
||||
void serialEvent2() __attribute__((weak));
|
||||
void serialEvent2() {}
|
||||
#define serialEvent2_implemented
|
||||
SIGNAL(USART2_RX_vect)
|
||||
{
|
||||
unsigned char c = UDR2;
|
||||
store_char(c, &rx_buffer2);
|
||||
}
|
||||
#elif defined(SIG_USART2_RECV)
|
||||
#error SIG_USART2_RECV
|
||||
#endif
|
||||
|
||||
#if defined(USART3_RX_vect) && defined(UDR3)
|
||||
void serialEvent3() __attribute__((weak));
|
||||
void serialEvent3() {}
|
||||
#define serialEvent3_implemented
|
||||
SIGNAL(USART3_RX_vect)
|
||||
{
|
||||
unsigned char c = UDR3;
|
||||
store_char(c, &rx_buffer3);
|
||||
}
|
||||
#elif defined(SIG_USART3_RECV)
|
||||
#error SIG_USART3_RECV
|
||||
#endif
|
||||
|
||||
void serialEventRun(void)
|
||||
{
|
||||
#ifdef serialEvent_implemented
|
||||
if (Serial.available()) serialEvent();
|
||||
#endif
|
||||
#ifdef serialEvent1_implemented
|
||||
if (Serial1.available()) serialEvent1();
|
||||
#endif
|
||||
#ifdef serialEvent2_implemented
|
||||
if (Serial2.available()) serialEvent2();
|
||||
#endif
|
||||
#ifdef serialEvent3_implemented
|
||||
if (Serial3.available()) serialEvent3();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect)
|
||||
// do nothing - on the 32u4 the first USART is USART1
|
||||
#else
|
||||
#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect)
|
||||
#error "Don't know what the Data Register Empty vector is called for the first UART"
|
||||
#else
|
||||
#if defined(UART0_UDRE_vect)
|
||||
ISR(UART0_UDRE_vect)
|
||||
#elif defined(UART_UDRE_vect)
|
||||
ISR(UART_UDRE_vect)
|
||||
#elif defined(USART0_UDRE_vect)
|
||||
ISR(USART0_UDRE_vect)
|
||||
#elif defined(USART_UDRE_vect)
|
||||
ISR(USART_UDRE_vect)
|
||||
#endif
|
||||
{
|
||||
if (tx_buffer.head == tx_buffer.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
#if defined(UCSR0B)
|
||||
cbi(UCSR0B, UDRIE0);
|
||||
#else
|
||||
cbi(UCSRB, UDRIE);
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer.buffer[tx_buffer.tail];
|
||||
tx_buffer.tail = (tx_buffer.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
#if defined(UDR0)
|
||||
UDR0 = c;
|
||||
#elif defined(UDR)
|
||||
UDR = c;
|
||||
#else
|
||||
#error UDR not defined
|
||||
#endif
|
||||
}
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef USART1_UDRE_vect
|
||||
ISR(USART1_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer1.head == tx_buffer1.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR1B, UDRIE1);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer1.buffer[tx_buffer1.tail];
|
||||
tx_buffer1.tail = (tx_buffer1.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR1 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef USART2_UDRE_vect
|
||||
ISR(USART2_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer2.head == tx_buffer2.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR2B, UDRIE2);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer2.buffer[tx_buffer2.tail];
|
||||
tx_buffer2.tail = (tx_buffer2.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR2 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef USART3_UDRE_vect
|
||||
ISR(USART3_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer3.head == tx_buffer3.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR3B, UDRIE3);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer3.buffer[tx_buffer3.tail];
|
||||
tx_buffer3.tail = (tx_buffer3.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR3 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
// Constructors ////////////////////////////////////////////////////////////////
|
||||
|
||||
HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer,
|
||||
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
|
||||
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
|
||||
volatile uint8_t *udr,
|
||||
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x)
|
||||
{
|
||||
_rx_buffer = rx_buffer;
|
||||
_tx_buffer = tx_buffer;
|
||||
_ubrrh = ubrrh;
|
||||
_ubrrl = ubrrl;
|
||||
_ucsra = ucsra;
|
||||
_ucsrb = ucsrb;
|
||||
_udr = udr;
|
||||
_rxen = rxen;
|
||||
_txen = txen;
|
||||
_rxcie = rxcie;
|
||||
_udrie = udrie;
|
||||
_u2x = u2x;
|
||||
}
|
||||
|
||||
// Public Methods //////////////////////////////////////////////////////////////
|
||||
|
||||
void HardwareSerial::begin(unsigned long baud)
|
||||
{
|
||||
uint16_t baud_setting;
|
||||
bool use_u2x = true;
|
||||
|
||||
#if F_CPU == 16000000UL
|
||||
// hardcoded exception for compatibility with the bootloader shipped
|
||||
// with the Duemilanove and previous boards and the firmware on the 8U2
|
||||
// on the Uno and Mega 2560.
|
||||
if (baud == 57600) {
|
||||
use_u2x = false;
|
||||
}
|
||||
#endif
|
||||
|
||||
try_again:
|
||||
|
||||
if (use_u2x) {
|
||||
*_ucsra = 1 << _u2x;
|
||||
baud_setting = (F_CPU / 4 / baud - 1) / 2;
|
||||
} else {
|
||||
*_ucsra = 0;
|
||||
baud_setting = (F_CPU / 8 / baud - 1) / 2;
|
||||
}
|
||||
|
||||
if ((baud_setting > 4095) && use_u2x)
|
||||
{
|
||||
use_u2x = false;
|
||||
goto try_again;
|
||||
}
|
||||
|
||||
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
|
||||
*_ubrrh = baud_setting >> 8;
|
||||
*_ubrrl = baud_setting;
|
||||
|
||||
sbi(*_ucsrb, _rxen);
|
||||
sbi(*_ucsrb, _txen);
|
||||
sbi(*_ucsrb, _rxcie);
|
||||
cbi(*_ucsrb, _udrie);
|
||||
}
|
||||
|
||||
void HardwareSerial::end()
|
||||
{
|
||||
// wait for transmission of outgoing data
|
||||
while (_tx_buffer->head != _tx_buffer->tail)
|
||||
;
|
||||
|
||||
cbi(*_ucsrb, _rxen);
|
||||
cbi(*_ucsrb, _txen);
|
||||
cbi(*_ucsrb, _rxcie);
|
||||
cbi(*_ucsrb, _udrie);
|
||||
|
||||
// clear any received data
|
||||
_rx_buffer->head = _rx_buffer->tail;
|
||||
}
|
||||
|
||||
int HardwareSerial::available(void)
|
||||
{
|
||||
return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE;
|
||||
}
|
||||
|
||||
int HardwareSerial::peek(void)
|
||||
{
|
||||
if (_rx_buffer->head == _rx_buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
return _rx_buffer->buffer[_rx_buffer->tail];
|
||||
}
|
||||
}
|
||||
|
||||
int HardwareSerial::read(void)
|
||||
{
|
||||
// if the head isn't ahead of the tail, we don't have any characters
|
||||
if (_rx_buffer->head == _rx_buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
|
||||
_rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
return c;
|
||||
}
|
||||
}
|
||||
|
||||
void HardwareSerial::flush()
|
||||
{
|
||||
while (_tx_buffer->head != _tx_buffer->tail)
|
||||
;
|
||||
}
|
||||
|
||||
size_t HardwareSerial::write(uint8_t c)
|
||||
{
|
||||
int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
// If the output buffer is full, there's nothing for it other than to
|
||||
// wait for the interrupt handler to empty it a bit
|
||||
// ???: return 0 here instead?
|
||||
while (i == _tx_buffer->tail)
|
||||
;
|
||||
|
||||
_tx_buffer->buffer[_tx_buffer->head] = c;
|
||||
_tx_buffer->head = i;
|
||||
|
||||
sbi(*_ucsrb, _udrie);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
HardwareSerial::operator bool() {
|
||||
return true;
|
||||
}
|
||||
|
||||
// Preinstantiate Objects //////////////////////////////////////////////////////
|
||||
|
||||
#if defined(UBRRH) && defined(UBRRL)
|
||||
HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X);
|
||||
#elif defined(UBRR0H) && defined(UBRR0L)
|
||||
HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0);
|
||||
#elif defined(USBCON)
|
||||
// do nothing - Serial object and buffers are initialized in CDC code
|
||||
#else
|
||||
#error no serial port defined (port 0)
|
||||
#endif
|
||||
|
||||
#if defined(UBRR1H)
|
||||
HardwareSerial Serial1(&rx_buffer1, &tx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1);
|
||||
#endif
|
||||
#if defined(UBRR2H)
|
||||
HardwareSerial Serial2(&rx_buffer2, &tx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2);
|
||||
#endif
|
||||
#if defined(UBRR3H)
|
||||
HardwareSerial Serial3(&rx_buffer3, &tx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3);
|
||||
#endif
|
||||
|
||||
#endif // whole file
|
||||
|
||||
Reference in New Issue
Block a user