[Keyboard] Create KBDFans directory (#5025)

* move over kbd19x into the kbdfans directory

* move over kbd4x into the kbdfans directory

* move kbd66 into the kbdfans directory

* move the kbd6x into the kbdfans directory

* move kbd8x into the kbdfans directory

* move kbd75 into the kbdfans directory

* move kbd67 into kbdfans directory

* add a fairly sparse readme for kbdfans directory

* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it

* get kbd75 compiling again

* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75

* add links to kbdfans readme

* fix some readme formatting

* there is no reason to have two different keymaps with such a small difference, condensing to one

* turning on backlights by default

* enable backlight by default for kbd66

* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.

* Update keyboards/kbdfans/kbd66/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* update readme link ordering

keyboards/kbd75/rev1/rev1.c

@@ -1 +0,0 @@
-#include "rev1.h"

keyboards/kbd75/rev2/rev2.c

@@ -1 +0,0 @@
-#include "rev2.h"

keyboards/kbd75/rules.mk

@@ -1 +0,0 @@
-DEFAULT_FOLDER = kbd75/rev1

keyboards/kbd8x/keymaps/default_backlighting/rules.mk

@@ -1,17 +0,0 @@
-#Build Options
-
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/kbdfans/kbd19x/readme.md

@@ -1,4 +1,4 @@
-# kbd19x
+# KBD19x
 
 ![kbd19x](https://i.imgur.com/0hWTEnh.jpg)
 
@@ -14,6 +14,6 @@ Hardware Availability: [KBDfans](https://kbdfans.cn)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd19x:default
+    make kbdfans/kbd19x:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd4x/readme.md

@@ -10,6 +10,6 @@ Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-cus
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd4x:default
+    make kbdfans/kbd4x:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd66/readme.md

@@ -10,6 +10,6 @@ Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.mas
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd66:default
+    make kbdfans/kbd66:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd66/rules.mk

@@ -60,7 +60,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/kbdfans/kbd67/readme.md

@@ -9,7 +9,7 @@ Hardware Availability: KBDFans
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd67/rev1:default
-    make kbd67/hotswap:default
+    make kbdfans/kbd67/rev1:default
+    make kbdfans/kbd67/hotswap:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd6x/readme.md

@@ -8,6 +8,6 @@ Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd6x:default
+    make kbdfans/kbd6x:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd75/kbd75.h

@@ -3,11 +3,11 @@
 
 #include "quantum.h"
 
-#ifdef KEYBOARD_kbd75_rev1
+#ifdef KEYBOARD_kbdfans_kbd75_rev1
     #include "rev1.h"
 #endif
 
-#ifdef KEYBOARD_kbd75_rev2
+#ifdef KEYBOARD_kbdfans_kbd75_rev2
     #include "../rev1/rev1.h"
     #include "rev2.h"
 #endif

keyboards/kbdfans/kbd75/keymaps/adit/keymap.c

@@ -2,8 +2,6 @@
 
 #define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 	[0] = LAYOUT(
@@ -45,40 +43,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	return true;
 }
 
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
-}
-
 enum function_id {
     SHIFT_ESC,
 };

keyboards/kbdfans/kbd75/keymaps/default/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [0] = LAYOUT(
@@ -22,12 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______,  _______,  _______,                      _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______
   ),
 };
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-    } else {
-        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-    }
-}
-

keyboards/kbdfans/kbd75/keymaps/iso/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 	[0] = LAYOUT(
@@ -22,11 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______,  _______,  _______,                      _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______
   )
 };
-
-void led_set_user(uint8_t usb_led) {
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-	}
-}

keyboards/kbdfans/kbd75/keymaps/smt/keymap.c

@@ -12,10 +12,6 @@ enum planck_keycodes {
   DVORAK
 };
 
-// Helpful defines
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 // Custom macros
 #define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
 #define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)

keyboards/kbdfans/kbd75/keymaps/spacemanspiff/keymap.c

@@ -39,12 +39,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-    } else {
-        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-    }
-}
-

keyboards/kbdfans/kbd75/readme.md

@@ -1,5 +1,4 @@
-KBD75
-===
+# KBD75
 
 Keyboard Maintainer: QMK Community  
 Hardware Supported: KBD75 PCB rev 1 and 2  
@@ -12,7 +11,7 @@ different areas.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd75/rev1:default
-    make kbd75/rev2:default
+    make kbdfans/kbd75/rev1:default
+    make kbdfans/kbd75/rev2:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd75/rev1/rev1.c

@@ -0,0 +1,12 @@
+#include "rev1.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    writePinHigh(B2);
+  } else {
+    writePinLow(B2);
+  }
+
+	led_set_user(usb_led);
+}

keyboards/kbdfans/kbd75/rev2/rev2.c

@@ -0,0 +1,12 @@
+#include "rev2.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    writePinHigh(B2);
+  } else {
+    writePinLow(B2);
+  }
+
+	led_set_user(usb_led);
+}