Remove references to bootloadHID flashing page in keyboard readmes (#23942)

* Remove references to bootloadHID flashing page in keyboard readmes

* Remove bootloadHID flashing page

docs/_aliases.json

@@ -4,6 +4,7 @@
     "/cli_dev_configuration": "/cli_configuration",
     "/dynamic_macros": "/feature_dynamic_macros",
     "/feature_common_shortcuts": "/feature_advanced_keycodes",
+    "/flashing_bootloadhid": "/flashing",
     "/getting_started_build_tools": "/newbs_getting_started",
     "/getting_started_getting_help": "/support",
     "/glossary": "/reference_glossary",

docs/_sidebar.json

@@ -64,13 +64,7 @@
                         "text": "Development Environments",
                         "items": [{ "text": "Docker Guide", "link": "/getting_started_docker" }]
                     },
-                    {
+                    { "text": "Flashing", "link": "/flashing" },
-                        "text": "Flashing",
-                        "items": [
-                            { "text": "Flashing", "link": "/flashing" },
-                            { "text": "Flashing ATmega32A (ps2avrgb)", "link": "/flashing_bootloadhid" }
-                        ]
-                    },
                     {
                         "text": "IDEs",
                         "items": [

docs/flashing_bootloadhid.md

@@ -1,74 +0,0 @@
-# BootloadHID Flashing Instructions and Bootloader Information
-
-ps2avr(GB) boards use an ATmega32A microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
-
-General flashing sequence:
-
-1. Enter the bootloader using any of the following methods:
-    * Tap the `QK_BOOT` keycode (may not work on all devices)
-    * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
-2. Wait for the OS to detect the device
-3. Flash a .hex file
-4. Reset the device into application mode (may be done automatically)
-
-## bootloadHID Flashing Target
-
-::: tip
-Using the QMK installation script, detailed [here](newbs_getting_started), the required bootloadHID tools should be automatically installed.
-:::
-
-To flash via the command line, use the target `:bootloadhid` by executing the following command:
-
-```
-make <keyboard>:<keymap>:bootloadhid
-```
-
-## GUI Flashing
-
-### Windows
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset. 
-3. Ensure the configured VendorID is `16c0` and ProductID is `05df`
-4. Press the `Find Device` button and ensure that your keyboard is found.
-5. Press the `Open .hex File` button and locate the `.hex` file you created.
-6. Press the `Flash Device` button and wait for the process to complete.
-
-## Command Line Flashing
-
-1. Place your keyboard into reset. 
-2. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
-
-### Windows Manual Installation
-For MSYS2:
-1. Download the BootloadHID firmware package from https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz.
-2. Extract contents using a compatible tool, for example 7-Zip.
-3. Add to the MSYS path by copying `commandline/bootloadHID.exe` from the extracted archive to your MSYS2 installation, typically `C:\msys64\usr\bin`.
-
-For native Windows flashing, the `bootloadHID.exe` can be used outside of the MSYS2 environment.
-
-### Linux Manual Installation
-1. Install libusb development dependency:
-    ```
-    # This depends on OS - for Debian the following works
-    sudo apt-get install libusb-dev
-    ```
-2. Download the BootloadHID firmware package:
-    ```
-    wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
-    ```
-3. Build the bootloadHID executable:
-    ```
-    cd /tmp/bootloadHID.2012-12-08/commandline/
-    make
-    sudo cp bootloadHID /usr/local/bin
-    ```
-
-### MacOS Manual Installation
-1. Install Homebrew by typing the following:
-    ```
-    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    ```
-2. Install the following packages:
-    ```
-    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-    ```

keyboards/amag23/readme.md

@@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make amag23:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make amag23:default:flash
 

keyboards/ares/readme.md

@@ -8,7 +8,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ares:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ares:default:flash
 

keyboards/bfake/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make bfake:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make bfake:default:flash
 

keyboards/db/db63/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make db/db63:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make db/db63:default:flash
 

keyboards/donutcables/budget96/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make donutcables/budget96:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make donutcables/budget96:default:flash
 

keyboards/eve/meteor/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make eve/meteor:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make eve/meteor:default:flash
 

keyboards/exclusive/e6v2/le_bmc/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make exclusive/e6v2/le_bmc:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make exclusive/e6v2/le_bmc:default:flash
 

keyboards/exclusive/e6v2/oe_bmc/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make exclusive/e6v2/oe_bmc:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make exclusive/e6v2/oe_bmc:default:flash
 

keyboards/exent/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make exent:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md))
+Flashing example for this keyboard:
 
     make exent:default:flash
 

keyboards/facew/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make facew:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make facew:default:flash
 

keyboards/foxlab/time80/readme.md

@@ -15,13 +15,11 @@ Make example for this keyboard (after setting up your build environment):
 
     make foxlab/time80:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make foxlab/time80:default:flash
 
-**Reset Key**: There are no reset switches or pads. Follow this
+**Reset Key**: There are no reset switches or pads. Remember to add a `QK_BOOT`
-[guide](https://docs.qmk.fm/#/flashing_bootloadhid)
-to have it flashed for the first time. Remember to add a `QK_BOOT`
 key on your keymap for future endeavors.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ft/mars65/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ft/mars65:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ft/mars65:default:flash
 

keyboards/ft/mars80/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ft/mars80:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ft/mars80:default:flash
 

keyboards/gray_studio/hb85/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make gray_studio/hb85:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make gray_studio/hb85:default:flash
 

keyboards/j80/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make j80:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make j80:default:flash
 

keyboards/jaykeeb/skyline/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make jaykeeb/skyline:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make jaykeeb/skyline:default:flash
 

keyboards/jc65/v32a/readme.md

@@ -16,7 +16,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make jc65/v32a:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make jc65/v32a:default:flash
 

keyboards/kbdfans/kbdpad/mk1/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make kbdfans/kbdpad/mk1:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make kbdfans/kbdpad/mk1:default:flash
 

keyboards/keychron/q2/readme.md

@@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment):
     make keychron/q2/jis:default
     make keychron/q2/jis_encoder:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/q2/ansi:default:flash
     make keychron/q2/ansi_encoder:default:flash

keyboards/keychron/q4/readme.md

@@ -16,7 +16,7 @@ Make example for this keyboard (after setting up your build environment):
     make keychron/q4/ansi/v2:default
     make keychron/q4/iso:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/q4/ansi/v1:default:flash
     make keychron/q4/ansi/v2:default:flash

keyboards/keychron/q60/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/q60/ansi:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/q60/ansi:default:flash
 

keyboards/keychron/q65/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/q65/ansi_encoder:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/q65/ansi_encoder:default:flash
 

keyboards/keychron/v2/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/v2/ansi:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/v2/ansi:default:flash
 

keyboards/keychron/v4/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/v4/ansi:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/v4/ansi:default:flash
 

keyboards/keychron/v7/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/v7/ansi:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/v7/ansi:default:flash
 

keyboards/keychron/v8/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make keychron/v8/ansi:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make keychron/v8/ansi:default:flash
 

keyboards/kira/kira80/readme.md

@@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make kira/kira80:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make kira/kira80:default:flash
 

keyboards/kprepublic/jj40/rev1/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make kprepublic/jj40/rev1:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make kprepublic/jj40/rev1:default:flash
 

keyboards/kprepublic/jj4x4/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make kprepublic/jj4x4:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make kprepublic/jj4x4:default:flash
 

keyboards/kprepublic/jj50/rev1/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make kprepublic/jj50/rev1:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make kprepublic/jj50/rev1:default:flash
 

keyboards/leeku/finger65/readme.md

@@ -9,7 +9,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make leeku/finger65:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make leeku/finger65:default:flash
 

keyboards/mechkeys/mechmini/v1/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make mechkeys/mechmini/v1:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make mechkeys/mechmini/v1:default:flash
 

keyboards/mehkee96/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make mehkee96:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make mehkee96:default:flash
 

keyboards/mt/mt40/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make mt/mt40:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make mt/mt40:default:flash
 

keyboards/mt/split75/readme.md

@@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make mt/split75:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make mt/split75:default:flash
 

keyboards/oddforge/vea/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make oddforge/vea:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make oddforge/vea:default:flash
 

keyboards/panc60/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make panc60:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make panc60:default:flash
 

keyboards/pearl/readme.md

@@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make pearl:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make pearl:default:flash
 

keyboards/percent/canoe/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make percent/canoe:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make percent/canoe:default:flash
 

keyboards/percent/skog/readme.md

@@ -8,7 +8,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make percent/skog:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make percent/skog:default:flash
 

keyboards/percent/skog_lite/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make percent/skog_lite:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make percent/skog_lite:default:flash
 

keyboards/singa/readme.md

@@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make singa:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make singa:default:flash
 

keyboards/spiderisland/split78/readme.md

@@ -16,7 +16,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make spiderisland/split78:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make spiderisland/split78:default:flash
 

keyboards/tgr/910/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tgr/910:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tgr/910:default:flash
 

keyboards/tgr/910ce/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tgr/910ce:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tgr/910ce:default:flash
 

keyboards/tgr/alice/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tgr/alice:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tgr/alice:default:flash
 

keyboards/tgr/jane/v2/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tgr/jane:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tgr/jane:default:flash
 

keyboards/tgr/jane/v2ce/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tgr/jane/v2ce:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tgr/jane/v2ce:default:flash
 

keyboards/tgr/tris/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make tris:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make tris:default:flash
 

keyboards/unikorn/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make unikorn:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make unikorn:default:flash
 

keyboards/winkeyless/b87/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make winkeyless/b87:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make winkeyless/b87:default:flash
 

keyboards/winkeyless/bface/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make winkeyless/bface:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make winkeyless/bface:default:flash
 

keyboards/winkeyless/bmini/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make winkeyless/bmini:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make winkeyless/bmini:default:flash
 

keyboards/winkeyless/bminiex/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make winkeyless/bminiex:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make winkeyless/bminiex:default:flash
 

keyboards/ymdk/bface/readme.md

@@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/bface:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/bface:default:flash
 

keyboards/ymdk/np21/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/np21:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/np21:default:flash
 

keyboards/ymdk/sp64/readme.md

@@ -8,7 +8,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/sp64:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/sp64:default:flash
 

keyboards/ymdk/ymd75/rev1/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/ymd75/rev1:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/ymd75/rev1:default:flash
 

keyboards/ymdk/ymd75/rev2/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/ymd75/rev2:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/ymd75/rev2:default:flash
 

keyboards/ymdk/ymd96/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/ymd96:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make ymdk/ymd96:default:flash