diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 5cc498a9ed..76c5c4f90b 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -246,31 +246,31 @@ Configure the hardware via your `config.h`: | Variable | Description | Default | |----------|-------------|---------| -| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | -| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | -| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 | -| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | -| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | -| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | -| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | +| `IS31FL3737_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | +| `IS31FL3737_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | +| `IS31FL3737_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 | +| `IS31FL3737_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | +| `IS31FL3737_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `IS31FL3737_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `IS31FL3737_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | | | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | | | `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | | -The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows: +The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3737_SWPULLUP`/`IS31FL3737_CSPULLUP` are given the value of `IS31FL3737_PUR_0R`), the values that can be set to enable de-ghosting are as follows: -| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description | +| `IS31FL3737_SWPULLUP/IS31FL3737_CSPULLUP` | Description | |----------------------|-------------| -| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | -| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | -| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) | -| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) | -| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) | -| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) | -| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) | -| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3737_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | +| `IS31FL3737_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3737_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3737_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3737_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) | +| `IS31FL3737_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) | +| `IS31FL3737_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) | +| `IS31FL3737_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | Here is an example using 2 drivers. @@ -287,7 +287,7 @@ Here is an example using 2 drivers. #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1010001 -#define DRIVER_COUNT 2 +#define IS31FL3737_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 30 #define DRIVER_2_LED_TOTAL 36 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 947c0a1d1a..94bd755dea 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -18,6 +18,7 @@ */ #include "is31fl3737.h" +#include #include "i2c_master.h" #include "wait.h" @@ -31,46 +32,46 @@ // ADDR1 represents A1:A0 of the 7-bit address. // ADDR2 represents A3:A2 of the 7-bit address. // The result is: 0b101(ADDR2)(ADDR1) -#define ISSI_ADDR_DEFAULT 0x50 +#define IS31FL3737_I2C_ADDRESS_DEFAULT 0x50 -#define ISSI_COMMANDREGISTER 0xFD -#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE -#define ISSI_INTERRUPTMASKREGISTER 0xF0 -#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 +#define IS31FL3737_COMMANDREGISTER 0xFD +#define IS31FL3737_COMMANDREGISTER_WRITELOCK 0xFE +#define IS31FL3737_INTERRUPTMASKREGISTER 0xF0 +#define IS31FL3737_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 +#define IS31FL3737_PAGE_LEDCONTROL 0x00 // PG0 +#define IS31FL3737_PAGE_PWM 0x01 // PG1 +#define IS31FL3737_PAGE_AUTOBREATH 0x02 // PG2 +#define IS31FL3737_PAGE_FUNCTION 0x03 // PG3 -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define IS31FL3737_REG_CONFIGURATION 0x00 // PG3 +#define IS31FL3737_REG_GLOBALCURRENT 0x01 // PG3 +#define IS31FL3737_REG_RESET 0x11 // PG3 +#define IS31FL3737_REG_SWPULLUP 0x0F // PG3 +#define IS31FL3737_REG_CSPULLUP 0x10 // PG3 -#ifndef ISSI_TIMEOUT -# define ISSI_TIMEOUT 100 +#ifndef IS31FL3737_I2C_TIMEOUT +# define IS31FL3737_I2C_TIMEOUT 100 #endif -#ifndef ISSI_PERSISTENCE -# define ISSI_PERSISTENCE 0 +#ifndef IS31FL3737_I2C_PERSISTENCE +# define IS31FL3737_I2C_PERSISTENCE 0 #endif -#ifndef ISSI_PWM_FREQUENCY -# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3737B only +#ifndef IS31FL3737_PWM_FREQUENCY +# define IS31FL3737_PWM_FREQUENCY 0b000 // PFS - IS31FL3737B only #endif -#ifndef ISSI_SWPULLUP -# define ISSI_SWPULLUP PUR_0R +#ifndef IS31FL3737_SWPULLUP +# define IS31FL3737_SWPULLUP IS31FL3737_PUR_0R #endif -#ifndef ISSI_CSPULLUP -# define ISSI_CSPULLUP PUR_0R +#ifndef IS31FL3737_CSPULLUP +# define IS31FL3737_CSPULLUP IS31FL3737_PUR_0R #endif -#ifndef ISSI_GLOBALCURRENT -# define ISSI_GLOBALCURRENT 0xFF +#ifndef IS31FL3737_GLOBALCURRENT +# define IS31FL3737_GLOBALCURRENT 0xFF #endif // Transfer buffer for TWITransmitData() @@ -83,22 +84,22 @@ uint8_t g_twi_transfer_buffer[20]; // buffers and the transfers in is31fl3737_write_pwm_buffer() but it's // probably not worth the extra complexity. -uint8_t g_pwm_buffer[DRIVER_COUNT][192]; -bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; +uint8_t g_pwm_buffer[IS31FL3737_DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[IS31FL3737_DRIVER_COUNT] = {false}; -uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0}; -bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; +uint8_t g_led_control_registers[IS31FL3737_DRIVER_COUNT][24] = {0}; +bool g_led_control_registers_update_required[IS31FL3737_DRIVER_COUNT] = {false}; void is31fl3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) { g_twi_transfer_buffer[0] = reg; g_twi_transfer_buffer[1] = data; -#if ISSI_PERSISTENCE > 0 - for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { - if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break; +#if IS31FL3737_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break; } #else - i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT); #endif } @@ -116,12 +117,12 @@ void is31fl3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16); -#if ISSI_PERSISTENCE > 0 - for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { - if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break; +#if IS31FL3737_I2C_PERSISTENCE > 0 + for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break; } #else - i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT); + i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT); #endif } } @@ -133,20 +134,20 @@ void is31fl3737_init(uint8_t addr) { // then disable software shutdown. // Unlock the command register. - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5); // Select PG0 - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL); // Turn off all LEDs. for (int i = 0x00; i <= 0x17; i++) { is31fl3737_write_register(addr, i, 0x00); } // Unlock the command register. - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5); // Select PG1 - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM); // Set PWM on all LEDs to 0 // No need to setup Breath registers to PWM as that is the default. for (int i = 0x00; i <= 0xBF; i++) { @@ -154,18 +155,18 @@ void is31fl3737_init(uint8_t addr) { } // Unlock the command register. - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5); // Select PG3 - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_FUNCTION); // Set de-ghost pull-up resistors (SWx) - is31fl3737_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + is31fl3737_write_register(addr, IS31FL3737_REG_SWPULLUP, IS31FL3737_SWPULLUP); // Set de-ghost pull-down resistors (CSx) - is31fl3737_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); + is31fl3737_write_register(addr, IS31FL3737_REG_CSPULLUP, IS31FL3737_CSPULLUP); // Set global current to maximum. - is31fl3737_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT); + is31fl3737_write_register(addr, IS31FL3737_REG_GLOBALCURRENT, IS31FL3737_GLOBALCURRENT); // Disable software shutdown. - is31fl3737_write_register(addr, ISSI_REG_CONFIGURATION, ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01); + is31fl3737_write_register(addr, IS31FL3737_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01); // Wait 10ms to ensure the device has woken up. wait_ms(10); @@ -225,22 +226,22 @@ void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bo void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) { if (g_pwm_buffer_update_required[index]) { // Firstly we need to unlock the command register and select PG1 - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM); is31fl3737_write_pwm_buffer(addr, g_pwm_buffer[index]); + g_pwm_buffer_update_required[index] = false; } - g_pwm_buffer_update_required[index] = false; } void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index) { if (g_led_control_registers_update_required[index]) { // Firstly we need to unlock the command register and select PG0 - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - is31fl3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5); + is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL); for (int i = 0; i < 24; i++) { is31fl3737_write_register(addr, i, g_led_control_registers[index][i]); } + g_led_control_registers_update_required[index] = false; } - g_led_control_registers_update_required[index] = false; } diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index e7fc97872c..a6a9a3a059 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -19,9 +19,41 @@ #pragma once +// ======== DEPRECATED DEFINES - DO NOT USE ======== +#ifdef DRIVER_COUNT +# define IS31FL3737_DRIVER_COUNT DRIVER_COUNT +#endif +#ifdef ISSI_TIMEOUT +# define IS31FL3737_I2C_TIMEOUT ISSI_TIMEOUT +#endif +#ifdef ISSI_PERSISTENCE +# define IS31FL3737_I2C_PERSISTENCE ISSI_PERSISTENCE +#endif +#ifdef ISSI_PWM_FREQUENCY +# define IS31FL3737_PWM_FREQUENCY ISSI_PWM_FREQUENCY +#endif +#ifdef ISSI_SWPULLUP +# define IS31FL3737_SWPULLUP ISSI_SWPULLUP +#endif +#ifdef ISSI_CSPULLUP +# define IS31FL3737_CSPULLUP ISSI_CSPULLUP +#endif +#ifdef ISSI_GLOBALCURRENT +# define IS31FL3737_GLOBALCURRENT ISSI_GLOBALCURRENT +#endif + +#define PUR_0R IS31FL3737_PUR_0R +#define PUR_05KR IS31FL3737_PUR_05KR +#define PUR_1KR IS31FL3737_PUR_1KR +#define PUR_2KR IS31FL3737_PUR_2KR +#define PUR_4KR IS31FL3737_PUR_4KR +#define PUR_8KR IS31FL3737_PUR_8KR +#define PUR_16KR IS31FL3737_PUR_16KR +#define PUR_32KR IS31FL3737_PUR_32KR +// ======== + #include #include -#include #include "progmem.h" typedef struct is31_led { @@ -49,14 +81,14 @@ void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bo void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index); void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL -#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL -#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL -#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL -#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL -#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define IS31FL3737_PUR_0R 0x00 // No PUR resistor +#define IS31FL3737_PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define IS31FL3737_PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define IS31FL3737_PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define IS31FL3737_PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define IS31FL3737_PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define IS31FL3737_PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define IS31FL3737_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/keyboards/dztech/tofu/ii/v1/config.h b/keyboards/dztech/tofu/ii/v1/config.h index 67a4c757af..b709c8d2ba 100644 --- a/keyboards/dztech/tofu/ii/v1/config.h +++ b/keyboards/dztech/tofu/ii/v1/config.h @@ -81,7 +81,7 @@ # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1010000 # define DRIVER_ADDR_2 0b1011111 -# define DRIVER_COUNT 2 +# define IS31FL3737_DRIVER_COUNT 2 # define DRIVER_1_LED_TOTAL 46 # define DRIVER_2_LED_TOTAL 20 # define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) diff --git a/keyboards/dztech/tofu/jr/v1/config.h b/keyboards/dztech/tofu/jr/v1/config.h index a05cdacf79..a9ab620c58 100644 --- a/keyboards/dztech/tofu/jr/v1/config.h +++ b/keyboards/dztech/tofu/jr/v1/config.h @@ -81,7 +81,7 @@ # define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1010000 # define DRIVER_ADDR_2 0b1011111 -# define DRIVER_COUNT 2 +# define IS31FL3737_DRIVER_COUNT 2 # define DRIVER_1_LED_TOTAL 48 # define DRIVER_2_LED_TOTAL 20 # define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) diff --git a/keyboards/frooastboard/walnut/config.h b/keyboards/frooastboard/walnut/config.h index 2703ec1e37..2f11b88377 100644 --- a/keyboards/frooastboard/walnut/config.h +++ b/keyboards/frooastboard/walnut/config.h @@ -3,12 +3,8 @@ #pragma once -#define ISSI_TIMEOUT 100 -#define ISSI_PERSISTENCE 0 -#define ISSI_PWM_FREQUENCY 0b010 -#define ISSI_SWPULLUP PUR_0R -#define ISSI_CSPULLUP PUR_0R -#define DRIVER_COUNT 1 +#define IS31FL3737_PWM_FREQUENCY 0b010 +#define IS31FL3737_DRIVER_COUNT 1 #define RGB_MATRIX_LED_COUNT 48 #define DRIVER_ADDR_1 0b1010000 diff --git a/keyboards/mt/mt84/config.h b/keyboards/mt/mt84/config.h index 67aae9a1fd..aba0632179 100644 --- a/keyboards/mt/mt84/config.h +++ b/keyboards/mt/mt84/config.h @@ -27,7 +27,7 @@ - #define DRIVER_COUNT 2 + #define IS31FL3737_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 44 #define DRIVER_2_LED_TOTAL 40 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h index 7cfc65d509..ca57e4e772 100644 --- a/keyboards/planck/ez/config.h +++ b/keyboards/planck/ez/config.h @@ -52,7 +52,7 @@ #define DRIVER_ADDR_1 0b1010000 -#define DRIVER_COUNT 1 +#define IS31FL3737_DRIVER_COUNT 1 #define RGB_MATRIX_LED_COUNT 47 #define RGB_MATRIX_KEYPRESSES