Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705)

* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'

* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'

* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'

keyboards/at_at/660m/rules.mk

@@ -1,39 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/candybar/rules.mk

@@ -1,37 +1,5 @@
-## chip/board settings
+# MCU name
-# - the next two should match the directories in
+MCU = STM32F072
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-
-# Cortex version
-MCU  = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/an_c/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/chimera65/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/instant60/rules.mk

@@ -1,39 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/iron165/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/ortho48/rules.mk

@@ -1,46 +1,18 @@
-# project specific files
+# MCU name
-VPATH += keyboards/cannonkeys/bluepill
+MCU = STM32F103
-SRC =	led.c \
-      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
+DFU_ARGS = -d 1eaf:0003 -a2 -R
-# MCU_LDSCRIPT = STM32F103x8
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/ortho60/rules.mk

@@ -1,46 +1,18 @@
-# project specific files
+# MCU name
-VPATH += keyboards/cannonkeys/bluepill
+MCU = STM32F103
-SRC =	led.c \
-      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
+DFU_ARGS = -d 1eaf:0003 -a2 -R
-# MCU_LDSCRIPT = STM32F103x8
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/ortho75/rules.mk

@@ -1,47 +1,18 @@
-# project specific files
+# MCU name
-VPATH += keyboards/cannonkeys/bluepill
+MCU = STM32F103
-SRC =	led.c \
-      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
 DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/practice60/rules.mk

@@ -1,46 +1,18 @@
-# project specific files
+# MCU name
-VPATH += keyboards/cannonkeys/bluepill
+MCU = STM32F103
-SRC =	led.c \
-      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
+DFU_ARGS = -d 1eaf:0003 -a2 -R
-# MCU_LDSCRIPT = STM32F103x8
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/practice65/rules.mk

@@ -1,46 +1,18 @@
-# project specific files
+# MCU name
-VPATH += keyboards/cannonkeys/bluepill
+MCU = STM32F103
-SRC =	led.c \
-      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
+DFU_ARGS = -d 1eaf:0003 -a2 -R
-# MCU_LDSCRIPT = STM32F103x8
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/satisfaction75/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/savage65/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/tmov2/rules.mk

@@ -1,43 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-#   comment out to disable the options.
-#
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.
@@ -48,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/converter/siemens_tastatur/rules.mk

@@ -1,43 +1,15 @@
-SRC = matrix.c
+# MCU name
+MCU = STM32F103
+
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-# OPT_DEFS =
+DFU_ARGS = -d 1eaf:0003 -a2 -R
-# MCU_LDSCRIPT = STM32F103x8
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-# BOARD = GENERIC_STM32_F103
 
-## chip/board settings
+SRC = matrix.c
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-DFU_ARGS = -d 1eaf:0003 -a 2
 
 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes   # Mouse keys

keyboards/handwired/ck4x4/rules.mk

@@ -1,37 +1,5 @@
-# project specific files
+# MCU name
-# SRC =	matrix.c \
+MCU = STM32F072
-# 	    led.c
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.

keyboards/handwired/onekey/bluepill/rules.mk

@@ -1,41 +1,10 @@
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
+# MCU name
-BOARD = GENERIC_STM32_F103
+MCU = STM32F103
 
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
 
 DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS ?= -v 1eaf -p 0003
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800

keyboards/handwired/onekey/stm32f0_disco/rules.mk

@@ -1,34 +1,2 @@
-## chip/board settings
+# MCU name
-# the next two should match the directories in
+MCU = STM32F072
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483

keyboards/peiorisboards/ixora/rules.mk

@@ -1,38 +1,5 @@
-# project specific files
+# MCU name
-
+MCU = STM32F042
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F042x6
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F042X6
-
-# Cortex version
-MCU  = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 
 # Build Options
 #   comment out to disable the options.

keyboards/projectkb/alice/rules.mk

@@ -1,35 +1,5 @@
-# project specific files
+# MCU name
-# SRC = ssd1306.c
+MCU = STM32F072
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -51,4 +21,5 @@ CUSTOM_MATRIX = no # Custom matrix file
 # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
 RGBLIGHT_ENABLE = yes
 
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes

keyboards/retro_75/rules.mk

@@ -1,37 +1,5 @@
-## chip/board settings
+# MCU name
-# the next two should match the directories in
+MCU = STM32F072
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483
 
 # Build Options
 #   change yes to no to disable

keyboards/vinta/rules.mk

@@ -1,39 +1,5 @@
-# project specific files
+# MCU name
-
+MCU = STM32F042
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F042x6
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F042X6
-
-# Cortex version
-MCU  = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.