* Vial support for KBDfans KBD67
* vial keymap for kbd67/mkiirgb/v3 moved to correct location
* Tap dancing disabled in kbdfans/kbd67/mkiirgb/v3:vial to free up space
* kbdfans/odin/*: Reformat info.json to be human-readable
Apply `qmk format-json` to the `info.json` files for `kbdfans/odin/rgb`
and `kbdfans/odin/soldered; no actual content changes.
* kbdfans/odin/*: Fix key ordering in info.json
The order of key entries in `info.json` did not match the order of
layout macro arguments (apparently the keys in the cursor block, which
are shifted down by 0.25u with respect to the rest of keys, were treated
as separate rows). Fix the order to make the configurator
produce proper keymaps.
* remove macroMode functionality
* update kbdfans/kbd75/rev1:noroadsleft keymap
- replace `_______` instances with `XXXXXXX` on System layer
- add line breaks between keymap layers
This patch corrects 2 issues with the LED matrix of the KDBFans KBD67 Lite (v3)
* Incorrect mapping of the right-shift, down-arrow, and right-arrow. (i.e. `NO_LED` positions of the `g_led_config` key matrix in the .c file do not match the `LAYOUT_65_ansi_blocker` matrix in the .h file.
* Remapping of the *LED Index to Physical Position* using physical measurements from actual keyboard and accounting for the southpaw LED position to define the true centre of the keyboard (more relevant to circular animations).
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
* error log cleanup: 40percentclub/25
40percentclub/25: Claims to support a community layout that does not exist: ortho_5x5
* error log cleanup: 40percentclub/4x4
☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x8
☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x16
* error log cleanup: 40percentclub/5x5
☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x5
* error log cleanup: 40percentclub/nori
☒ 40percentclub/nori: Claims to support a community layout that does not exist: ortho_4x8
* error log cleanup: barracuda
☒ barracuda: Claims to support a community layout that does not exist: ortho_3x11
* error log cleanup: bpiphany/frosty_flake
☒ keyboards/bpiphany/frosty_flake/frosty_flake.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
* error log cleanup: bpiphany/pegasushoof/2013
☒ keyboards/bpiphany/pegasushoof/2013/2013.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
* error cleanup: bpiphany/pegasushoof/2015
☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_iso: Nested layout macro detected. Matrix data not available!
* error log cleanup: 40percentclub
☒ 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x10
☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x10
* error cleanup: converter/usb_usb
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
* error cleanup: ergo42
☒ ergo42/rev1: Claims to support a community layout that does not exist: ortho_4x14
* error cleanup: handwired/412_64
☒ handwired/412_64: Claims to support a community layout that does not exist: ortho_4x16
* error log cleanup: handwired/tritium_numpad
☒ handwired/tritium_numpad: Claims to support a community layout that does not exist: nontra_6x4
* error log cleanup: handwired/xealous/rev1
☒ handwired/xealous/rev1: Claims to support a community layout that does not exist: split60
* error log cleanup: kbdfans/kbd67/rev2
⚠ kbdfans/kbd67/rev2: info.json uses alias name LAYOUT_65_ansi_blocker_splitbs instead of LAYOUT_65_ansi_blocker_split_bs
* error cleanup: keebio/nyquist
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
* error cleanup: kindakeyboards/conone65
☒ kindakeyboards/conone65: Claims to support a community layout that does not exist: 65_iso_split_bs
* error cleanup: latinpadble
☒ latinpadble: Claims to support a community layout that does not exist: pad
* error cleanup: masterworks/classy_tkl/rev_a
☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_ansi_wkl
* error cleanup: meira
⚠ meira/featherble: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT
⚠ meira/promicro: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT
* error cleanup: nopunin10did/jabberwocky
⚠ nopunin10did/jabberwocky: MANUFACTURER in config.h is overwriting manufacturer in info.json
* error cleanup: ok60
☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift
* error cleanup: ok60
☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift
* error cleanup: planck
☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
⚠ planck/thk: DEBOUNCE in config.h is overwriting debounce in info.json
⚠ planck/thk: DEVICE_VER in config.h is overwriting usb.device_ver in info.json
⚠ planck/thk: DIODE_DIRECTION in config.h is overwriting diode_direction in info.json
⚠ planck/thk: MANUFACTURER in config.h is overwriting manufacturer in info.json
⚠ planck/thk: PRODUCT_ID in config.h is overwriting usb.pid in info.json
⚠ planck/thk: VENDOR_ID in config.h is overwriting usb.vid in info.json
⚠ planck/thk: QMK_ESC_OUTPUT in config.h is overwriting qmk_lufa_bootloader.esc_output in info.json
⚠ planck/thk: QMK_ESC_INPUT in config.h is overwriting qmk_lufa_bootloader.esc_input in info.json
⚠ planck/thk: QMK_LED in config.h is overwriting qmk_lufa_bootloader.led in info.json
⚠ planck/thk: QMK_SPEAKER in config.h is overwriting qmk_lufa_bootloader.speaker in info.json
⚠ planck/thk: Matrix pins are specified in both info.json and config.h, the config.h values win.
⚠ planck/thk: LAYOUTS in rules.mk is overwriting community_layouts in info.json
⚠ planck/thk: Feature mousekey is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature extrakey is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature console is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature command is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature sleep_led is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature nkro is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature backlight is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature rgblight is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature bluetooth is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature audio is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature encoder is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature dip_switch is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature bootmagic_lite is specified in both info.json and rules.mk, the rules.mk value wins.
* error cleanup: primekb/prime_m
☒ primekb/prime_m: Claims to support a community layout that does not exist: ortho_5x6
* error cleanup: rgbkb/sol/rev2
⚠ rgbkb/sol/rev2: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(BACKLIGHT_LEDS + FULLHAND_LEDS)'
* error log cleanup: shk9
☒ shk9: Claims to support a community layout that does not exist: ortho_3x3
* error log cleanup: sowbug
⚠ sowbug/68keys: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: 'DRIVER_LED_TOTAL'
⚠ sowbug/ansi_tkl: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(DRIVER_LED_TOTAL)'
* error log cleanup: torn
☒ torn: Claims to support a community layout that does not exist: split_3x6_4
* error cleanup: ymdk/np24/u4rgb6
☒ ymdk/np24/u4rgb6: Claims to support a community layout that does not exist: ortho_4x6
* error cleanup: masterworks/classy_tkl/rev_a
☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_iso_wkl
* Use memcmp to determine if matrix changed.
* Firmware size issues.
* Add documentation for the lack of need of MATRIX_ROW_PINS/MATRIX_COL_PINS, when overriding low-level matrix functions.
* Set bootloader to stm32-dfu for STM32F303
* Set bootloader to stm32-dfu for STM32F0x2
* Set bootloader to stm32-dfu for STM32F4x1
* Set bootloader to stm32duino for sowbug
* Delete redundant bootloader_defs headers
* Add some missing MCU name comments
* Move APM32 dfu-suffix overrides underneath bootloader
* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Set Dvorak as the standard base layer
* Remove unneeded includes
* Remove custom handling for Quake 2
Have now rewritten my in-game configuration to use Dvorak mapping instead of QWERTY, which means I don't need any of this stuff.
* Clean up comments in KC60 keymap
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* revert changes
* [Keyboard] Add 'LAYOUT_65_ansi_split_bs' support to KBDfans KBD67 rev2
This is already supported by VIA.
* [Keymap] Fix kbd67 catrielmuller_camilad keymap
* [Keyboard] Add my keymap for KBDfans KBD67 rev2 using 'LAYOUT_65_ansi_split_bs'
* Initial attempt at allowing keyboards to indicate what features they do not support
* try to use a for loop instead
* Update disable_features.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add a few more features
* remove my test fixture
* disable things that make all:all suggested"
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* KBDfans Bella Soldered: add readme
* add image to readme
* tidy-up Configurator layout data
Key positioning was not true to the assembled board.
* reduce readme redundancy
* add maja capslock indicator
add maja capslock indicator
* Update keyboards/kbdfans/maja/maja.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* first pass at fixing the key labeling
* second pass of fixing key labeling
* third pass of this key naming
* another pass of changing key naming
* another pass
* another pass
* another pass
* renamed it all
* give a good vid and pid
* add via keymap
* add on to the comments
* update readme and comments
* one more small change
Adding my kbd67mkii keymap and some changes to kumo
Keymaps for kbdfans/kbd67/mkii_soldered and thevankeyboards/minivan
* Changes to minivan layout
* KBD67 keymap
* commiting my files
* KBD67 MkII Soldered: Fix ISO blocker layout
Matrix data was wrong; KC_NUHS key did not work.
* KBD67 MkII Soldered: Add ISO blocker with Split Backspace layout
* kbd67/mkiirgb - allow disabling rgb matrix
wrap rgb matrix funs in defines
* kbd67mkiirgb - changes per review
remove kb funcs that just call the user version. what's left is all rgb
matrix stuff so we can just wrap the whole file.
* [kbdfans] Added dbroqua layout for kbd6x
Add dbroqua keymap for kbd6x
Add dbroqua layout for kbd6x with HHKB style and RGB.
* Update keymap.c
* Change based on zvecr
* Added RESET button
* Update info.json
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add ansi and iso layouts
* fix iso map mistake
* fix mistake again...
* Update keyboards/kbdfans/kbd67/mkii_soldered/keymaps/iso/keymap.c
* rename layout macros to the blocker variants and add ansi_split_bs
* Apply suggestions from code review
A user in Discord reported that the right bracket and ISO hash keys on
KBD67 rev2 using LAYOUT_65_iso were swapped. When comparing
LAYOUT_65_iso with LAYOUT_65_ansi, the problem with a wrong assignment
of the right bracket key is obvious — that key is K1D in the ANSI layout
macro, but the ISO layout macro had K1E there, and K1D at the position
of the ISO hash key.
Fix the LAYOUT_65_iso macro by swapping those arguments (and also align
the K1D argument for the right bracket key properly).
* Replace custom RCTRL implementation with built-in LM
Caveat: sends LCtrl instead of RCtrl
* Enable VIA support in KBD6X keymap
* Disable LTO on ChibiOS boards
* Disable locking support and Magic keycodes for all keymaps
* Organize and annotate rules.mk and config.h files
* Enable Console for Melody96 keymap
* L_RANGE_KEYMAP → LAYERS_KEYMAP
* Revert "Replace custom RCTRL implementation with built-in LM"
This reverts commit 17d706a82d7e31b53cd84efeb9b2ddb9922a2368.
* Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps
* Enable Bootmagic Lite for all VIA keymaps
* Community layout support for KBD67 hotswap
* Community layout support for KBD67 rev1
* Community layout support for KBD67 rev2
* Move bcat's KBD67 hotswap layout to community
* Move menu key on ergo boards to match staggered
* Unify 60_tsangan_hhkb and 60_ansi_split_bs_rshift
* Sync KBD67, Quefrency with community layouts
* Update ergo KLE images
* Update community layout KLE images
* Update KLE images/descriptions for remaining keebs
* Update mousekey parameters in userspace
* Disable GRAVE_ESC in boards where it isn't used
* Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X
* Disable RGB controls when Fn/Caps indicator lights are on
* Use LTO_ENABLE instead of setting -flto directly
* Add led_update_keymap, use SS_LCTL instead of SS_LCTRL
* Change TAPPING_TOGGLE from 2 to 3
* add new layout for 65% with blocker and add matching keymap
the rev2 pcb gets used in the kbd67 which has a blocker between the left arrow key and the right ctrl key. this layout is missing so far even though it's probably the most used one for this board.
* add split backspace layout with blocker
* change keycode for backslash
* update rules.mk and add missing layouts in info.json
* Update keyboards/kbdfans/kbd67/rev2/rules.mk
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* add a VIA keymap for kbd75
* rev2 is a completely different pcb allowing a NEW layout, setting this to have a different product id so users don't get confused when they're able to enable numpad layout on rev1 VIA
* Update keyboards/kbdfans/kbd75/rev1/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/kbdfans/kbd75/rev2/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* added via keymap for kbd8x mkii
* adding via to kbd8x mk2
* modified via kbd8x mk2 keymap
* enable LTO kbd8x mk2 via keymap
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* removed backticks kbd8x mk2 via keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add the via keymap
* get an appropriate unused VID
* fix formatting up a bit
* Update keyboards/kbdfans/kbd67/mkiirgb/v1/config.h
* Update keyboards/kbdfans/kbd67/mkiirgb/v2/config.h
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Remove custom backlight code for PS2AVRGB boards
* Remove custom driver setting
* BACKLIGHT_BREATHING goes in config.h, not here
* Don't need to include backlight.c again here either
* Turn on backlight for Canoe
* Disable console on a few boards due to oversize
* Add files via upload
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/keymap.c to keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/readme.md to keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
* Update readme.md
* Update readme.md
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add readme to each of the mkii versions
* update the most parent of kbd67 readmes to have history of the new versions
* fix up the parent readme for the two types of boards
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* fixup readmes
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Community Layout support for KBD8X MK2
- add LAYOUT_tkl_ansi and LAYOUT_tkl_iso layout macros
- add default_tkl_iso keymap, using new layout macro
- rename ansi_625 keymap to default_tkl_ansi, using new layout macro
- change keymaps to four-space indent
- update info.json
- remove firmware size impacts from rules.mk
* remove empty functions
* rename the ANSI and ISO keymaps per fauxpark
* Update keyboard kit URL
* Replace custom RGB driver with new one from #7183
* Replace backlight with standard impl
* Remove some unnecessary default settings
* Disable COMMAND since docs want it off by default
(There's no working IS_COMMAND set for this board anyway, so it's
already a nop.)
* Enable link-time optimization
* Make RGB static gradient ranges shorter
* Shift Quefrency media keys to the right
* Shift KBD67 media keys to the right
* Move some 60% keys from function to adjust layer
* Set "extra" Lily58 keys to browser back/forward
* Remove Instant60 EEPROM hack after #6968
* Remove unnecessary bits from macropad keymaps
* Update KLE images
* Clone 8x source to begin
* Start replacing stuff
* Get things compiling
* Rename files
* Move board files to match MKII RGB files
* Adjust readme
* Adjust main keymap to be functional
* Make defualt keymap more basic; add personal keymap
* Remove unnecessary trailing slashes from keymap
* Remove unused functions from keymaps
* Remove obsolete build flags
* Adjust comments as requested
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Adjust as suggested
* Fix broken compile following applying suggestions
* Enable PERMISSIVE_HOLD and TAPPING_FORCE_HOLD
* Fix indentation in userspace
* Shuffle around more Lily58 symbol keys
* Reformat KBD67 keymap and KLE images
* Fix Lily58 lower layer image
* Reformat Quefrency keymap and KLE images
* Fix KBD67 KLE images... again
* Add KLE links for Quefrency
* Reformat 60% layouts and KLE images
* Move Super key back to right half of Lily58
* Move Lily58 ins/del out of the way of numbers
* Fix bottom row of Lily58 KLE image
* First draft of my layout
* Improved layout and cleanup of files
* Update keymap and add rules
* Add keymap.h with permissive_hold setting
* Rename keymap.h to correct name config.h
* Add next/prev and special lock key to Fn layer
* Use correct modifier in MY_LOCK command
* Removed unnecessary filler defines
* Add build instructions to README
* Move RGB controls to more logical up/down key positions, move next/prev controls, remove del from Fn layer
* Fix wrong placeholders and fix up formatting
* Remove unused code
* Clarify comments on custom defines
* Update keyboards/kbdfans/kbd6x/keymaps/mekberg/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Align bottom row in KBD6X keymap to match LAYOUT macro
* Remove TAP_HOLD_CAPS_DELAY override in userspace
* Change default USB polling rate to 1000 Hz
* Move media controls to nav cluster on Wasdat
* Add dz60:konstantin_b keymap
* e6.5 actually already had a 65_ansi_blocker LAYOUT macro, so just had to enable in rules.
* Add the 65_ansi_blocker LAYOUT macro and enable in rules.mk
* rename LAYOUT macro in .h and in the keymap.c as it was only a default keymap. Also enable in rules.mk
* rename but also had to define the existing LAYOUT macro as the new one to prevent breakage of existing keymaps
* add 65_ansi_blocker support for vinta
* forgot to update the info.json on these
* add new default layout 65_ansi_blocker support to alt
* add 65_ansi_blocker support
* undo changes
* move kbd67mkiirgb into kbd67 directory as mkiirgb
* rename files
* rename LAYOUT to LAYOUT_65_ansi_blocker
* add support for default layout
* update readme for new build target
* update parent readme with the fourth variant
* convert codebase to #pragma once
* fix file includes
- quantum.h is included at keyboard level, redundant at revision level
- keyboard-level path is accessible at revision level, remove relative pathing
* duplicate common layout macros from rev1 to rev2
Add the layout macros supported by both rev1 and rev2 to rev2.h directly, which exposes these layouts to QMK Configurator.
* enable community layout support (75_ansi, 75_iso)
* add LAYOUT_75_iso layout data
It needs its own tree because its keys are in a different order from LAYOUT_iso_1u even though the physical layout is the same.
* minimize rules.mk files (use QMK defaults)
* use atmel-dfu bootloader rule
* fix typo on rev1 info.json
* Add missing void parameter declarations to *_light functions
* Add doro67/multi:konstantin keymap
* Allow FNLK to be canceled with Esc
* Function layer → Fn layer in keymap comments
* Enable Fn layer tap dances only if LAYER_FN is defined
* Update KBD6X keymap spacing to match LAYOUT spacing
* Add regular FNLK to userspace, update keymap comment labels
* Rename KC_BRK → BREAK, KC_SYSR → SYSRQ in userspace
* Change mousekey positions in KBD6X
* Disable Console in KBD6X to reduce firmware size
* Return false in process_record_* only when overriding existing keys
* Fix Caps light not working after LSFT_FN
* Refactor Fn/Caps light, fix sequencing issues
* Switch Quefrency back to I2C (#6161 fixes the lag)
* Update Quefrency keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update KBD67 keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Move Menu to a layer tap on the Fn key since that's a more natural
location.
* Update 60% Tsangan HHKB layout
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update 60% ANSI split backspace/right-shift layout
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update MODERN_DOLCH_RED color
* Remove unused RAL_LAL tap dance
* Disable Space Cadet on all boards
* Rework SEND_STRING_CLEAN into CLEAN_MODS, fix DST_P_R/DST_N_A
* Disable unnecessary underglow animations
* Rearrange feature flags in rules.mk files
* Change custom colors from structs to defines
* Add some explicit initializers
* Add MODERN_DOLCH_CYAN color
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add led_set_keymap() template function
* Change underglow color based on Caps/Fn state
* Preserve val when changing underglow colors
* Only trigger Fn light for Fn layer
* Refactor fn_light() and caps_light() slightly
* Add comments to fn_light() and caps_light()
* Add missing TD_RSF_RCT tap dance
* Use standard QMK HSV and RGB structs, fix Godspeed colors
* Move PROGMEM after the type in RGB intervals
* Add MODERN_DOLCH_RED color, use it on KBD6X
* Use 255 instead of RGBLIGHT_LIMIT_VAL in color definitions
* Remove IS_COMMAND override on Whitefox
* Add wasdat:konstantin keymap
TODO: Move it to layouts/
* Use HHKB arrow arrangement for mouse keys on KBD6X
* Move KC_APP from Ctrl to M on all boards
* Use RCT_RSF on Melody96
* Set TAP_HOLD_CAPS_DELAY to 50 in userspace
* Use RSF_RCT instead of RCT_RSF
* Begin work
* Make things a tad easier to read
* Fix spacing
* Get things compiling
* Build a variety of generic keymaps
* Correct RGB pin
* Add configurator json
* Apply suggestions from code review
Co-Authored-By: Elliot Powell <32494740+e11i0t23@users.noreply.github.com>
Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
* Switch Quefrency from flaky I2C back to serial
* Lower mouse wheel speed on Quefrency slightly
* Migrate common settings to userspace
* Enable Bootmagic Lite for consistent reset to bootloader.
* Turn off some undesired features across all keyboards.
* Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite
also does an EEPROM reset.
* Set backlight and underglow increments consistently across all
keyboards since lots of them like to override the deafults.
* Set mouse keys consistently across all keyboards.
* Update function layer keymap images
* Set Quefrency bootloader correctly for Elite-C
* Update Quefrency layout to be more like HHKB
* Update KBD67 layout to be more like HHKB
* Add keymap for BDN9 macropad
* Add FnLk to Melody96 bottom row
* Update conditional in userspace makefile
Thanks @drashna
* Add F keys to Melody96 Fn layer
* Add FN_ESC alias to userspace
* Update KBD6X keymap
* Fix RGB_MATRIX_ENABLE constant name in #if
* Remove trailing \ from LAYOUT macro calls
* Set RGB mode on EEPROM reset in KBD6X
* Swap right and middle mouse buttons in KBD6X
* Rearrange RGB controls in KBD6X
* Update keycode aliases, replace CLEAR with DEL_NXT in KBD6X
Add Clear to KBD6X as RCtrl+`
* Convert code to 4 space indents
* Tweak RCTRL layer functionality
* Replace NUMPAD custom keycode with layer state logic
* Update RGB_MATRIX_ENABLE check
Co-Authored-By: vomindoraan <vomindoraan@gmail.com>
* Adding ortho_4x12 & planck_mit layouts for KBD4X.
* Adding LAYOUT_kc_ortho_4x12 macro to KBD4x.
* Turn off console for KBD4X so firmware size falls within limit.
* Add files via upload
* kingwangwong
* kingwangwong
* revisions and adding atom40
* revisions for 5626
* revisions for 5626
* revisions for 5626.
* revisions for 5626, re added safe range
* revisions for 5626, added qmkkeyboard
* revisions for 5626, quefrency
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* The code in this directory supports the KBD65
* Update readme.md
* Update readme.md
* Clear up the confusion between the kbd67/kbd65 naming.
* Update keyboards/kbdfans/kbd67/readme.md
Co-Authored-By: Hackerpilot <briancschott@gmail.com>
* Change how desktop commands work
* Add DST_MOD_MASK as a config option
* DST_RMV → DST_REM
* Add melody96:konstantin keymap
* Update custom SEND_STRING
* Move feature flags from userspace into keyboard rules
* Use "Vo-", "Vo+" instead of "VoD", "VoU" in keymap comments
* Add RGB controls and numpad Unicode to Melody96 keymap
* Add RGB_SET keycode to Melody96 and RGB files to userspace
* Generate UNICODE and UNICODEMAP constants using macros
* Avoid collisions with X_* send string constants
* Use two spaces before inline comments
* Add _keymap versions of other custom Quantum functions
Not added: eeconfig_update_keymap, eeconfig_read_keymap
* Switch to UNICODEMAP in keyboard rules
* Make toggle_numpad a nested function in process_record_user
* Set Melody96 underglow color to Godspeed blue on EEPROM reset
* Remove most _keymap and _user definitions in userspace
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Update GODSPEED_BLUE values and RGB mode keys
* Add GODSPEED_YELLOW color
* Set preferred intervals for rgblight effects
* Update tap dance function names
* Replace td_lshift_fn with generic td_mod_layer, add TD_RCTL_FN
Move TD_FN_RCTL after TD_RCTL_FN
* Replace td_fn_rctrl with generic td_layer_mod
* Add blank lines, prefer explicit initialization
* ACTION_TAP_DANCE_DOUBLE_MODS → ACTION_TAP_DANCE_DOUBLE_MOD
* Update Godspeed colors
* Add media controls to Melody96 keymap
* Add SysRq, Break combos and other keys to Melody96 keymap
* pragma once and turn on bootmagic lite
* pragma once changes and turning on bootmagic lite
* switch to using pragma once
* switch to using #pragma once
* switch to using #pramga once
* set bootmagic from no to lite and put in a note in the readme
* use pragma once
* discovered a compile error when testing with default keymap. The inlined led functions need to be externed in the .c file
* might as well turn on mouse keys as well
* move over kbd19x into the kbdfans directory
* move over kbd4x into the kbdfans directory
* move kbd66 into the kbdfans directory
* move the kbd6x into the kbdfans directory
* move kbd8x into the kbdfans directory
* move kbd75 into the kbdfans directory
* move kbd67 into kbdfans directory
* add a fairly sparse readme for kbdfans directory
* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it
* get kbd75 compiling again
* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75
* add links to kbdfans readme
* fix some readme formatting
* there is no reason to have two different keymaps with such a small difference, condensing to one
* turning on backlights by default
* enable backlight by default for kbd66
* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.
* Update keyboards/kbdfans/kbd66/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* update readme link ordering
