* Added WholesomeDucky keymap for GMMK Pro
* Finalized keymap & added 1000hz polling for GMMK Pro
* Corrected for RAlt and Fn being swapped
* Fixed RAlt and Fn being swapped in the layout definition. Updated personal keymap to reflect fixed layout.
* Removed an old comment from personal keymap for GMMK Pro
* added VIA support
* Defined bootmagic row and column for GMMK Pro Esc key
* Update keyboards/gmmk/pro/config.h
* Update keyboards/gmmk/pro/keymaps/via/keymap.c
* Update keyboards/gmmk/pro/keymaps/via/keymap.c
* peepeetee's bodged hub16 keymap
* add layer 3 lighting
* actually adds layer 3 lighting
* fixes layer 0; behavior is that layor 0 is unaltered from base pattern, while other states have distinct solid colors
* Add RGB matrix suspend wake function for Planck/rev6
* Update suggested definition to allow user override.
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: filterpaper <filterpaper@localhost>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Git keymap for ANAVI Macro Pad 8 with the following shortcuts.
On the first row from left to right:
- git status
- git log
- git pull
- git push
On the second row from left to right:
- git diff
- git add
- git commit
- FN key to switch to the 2nd layout and control lights
Reduce the number of supported RGB animations and effects in
config.h to shrink the firmware size and fit it on the device.
Signed-off-by: Leon Anavi <leon@anavi.org>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: George Wietor <george@LIGHT-GRAY.local>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
The keymap for this PCB as of April 5, 2020 has a 4rth, largely superfluous layer, creating a total of 5 layers.
When ported to VIA, this results in a layer that users can access but cannot edit. I propose removing this layer completely along with it's access from the default.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
with default and i2cscanner keymaps
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
- Use normal ChibiOS I2C driver.
- Move drawing code to housekeeping -- previously it was during matrix
scan, which gets executed during bootmagic checks. However, bootmagic
is invoked before QWIIC subsystem is enabled, which means I2C isn't
configured yet. All I2C calls to the OLED fail with timeouts while
bootmagic is being checked. Housekeeping ensures this is executed once
the system has initialised and settled.
- QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
This keymap for ANAVI Macro Pad 2 contains a couple of shortcuts
for Google Meet:
- left key: turn on/off the microphone (mute button)
- right key: turn on/off the camera
Signed-off-by: Leon Anavi <leon@anavi.org>
* cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows
* Made the layout data easier to read.
* helix/rev2/keymaps/five_rows/keymap.c
* helix/rev3_5rows/keymaps/five_rows/keymap.c
* The following two were made the same.
* keymaps/five_rows/config.h
* keymaps/five_rows/oled_display.c
The binary of the compilation result has not changed.
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk
KEYBOARD_LOCAL_FEATURES_MK was moved to the end.
* add '#define DISABLE_SYNC_TIMER' into helix/rev3_5rows/keymaps/five_rows/config.h
The sync timer features worsen the matrix scan rate of the Helix keyboard. I'm not sure if it makes sense to have sync timer features enabled on the Helix keyboard. So in my keymap I disable this.
The right-most top-most key on the Kinesis Advantage keyboard is labeled
“Progrm” and was meant to enter the Teensy bootloader as per the comment.
However, the keycode was set to KC_1, which just produces a “1”.
It should be RESET instead.
This commit fixes KC_1 to RESET in all files where the fix is needed.
The other files have already been fixed independently.
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added adns5050 sensor code, as well as implementations for the Ploopy Mini and the Ploopy Nano
* fixed spurious scrolling issue
* recommended fixes for pr linting and cleanup
* Minor improvements to BM68RGB
* Add grave esc and LTO support
* Move comments to end of line
* Document the use of qmk script for compiling and flashing
* Revert arrow key flags back to mod
* Update keyboards/bm68rgb/bm68rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/bm68rgb/bm68rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove grave escape
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update tab spacing
Co-authored-by: Ryan <fauxpark@gmail.com>
* Reverted make default
Co-authored-by: Ryan <fauxpark@gmail.com>
* Reverted make flash
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: filterpaper <filterpaper@localhost>
Co-authored-by: Ryan <fauxpark@gmail.com>
* update keyboards/helix/pico/keymaps/mtei/keymap.c
Stopped using the LAYOUT_kc macro. (this is response to #12160)
There is no change in the generated binary.
* small update pico/keymaps/mtei/keymap.c
This keymap for ANAVI Macro Pad 2 contains popular git commands
typed out and executed with a single key:
- left key: git commit -s
- right key: git push
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add suspend wake functions for RGB Matrix
* Add suspension RGB functions to Planck/rev6 and Preonic/rev3
* Add suspend wake to Mark 65
* Revert changes to planck and preonic
* Remove changes to The Mark65
Co-authored-by: filterpaper <filterpaper@localhost>
* initial rgb driver fix
* added underglow LEDs and fixed typo in RGB locations
* removed test code
* added my key maps
* updated rgb keymap to work with changes
* refactored my code to make it more maintainable and updated keymaps.
* added GPL licence
* Turned off matrix scan rate debug info
* added checks if RGB matrix is enabled to fix errors when building keymaps without RGB matrix enabled
* Apply suggestions from code review by fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Renamed led driver file to be less ambiguous
* Renamed is31fl3733 driver files to is31fl3733-dual
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] YMDK YM68
Converted from a KBFirmware JSON file provided via the vendor's product listing.
PCB supports Backlight on B6 and RGB Underglow on E2, but the LEDs are not pre-soldered according to the PCB photos.
* update VENDOR_ID and PRODUCT_ID
* added Vanana / Vaguette Lite / Waaffle
* changed extra GPIO allocations of Waaffle and Vanana
* Apply suggestions from code review
changed layout name of vaguette Lite / requested by drashna
* Apply suggestions from code review
Requested keymap changes have been made.
* all changes requested by collaborators are made
* RGB config updated / keymap updated
* fixed vaguette lite info.json
* fixed vaguette lite info.json
* fixed vaguette lite info.json
* Apply suggestions from code review
request changes are made
* pre rename h
* vaguettelite reanmed to lowercases
* fixed vanana keymap
* Apply suggestions from code review
* changed Bootmagic key of VaguetteLite as suggested
* Updated via keymap of Vaguette Lite as suggested
* add vaguette lite 6.25 layout
* added vaguette lite noclew keymap
* updated vaguette lite 6.25u keymap description
* updated vanana default keymap
* updated keymap spacing
* reabased from the official repo
* Update keymap.c
fixed vaguette lite keymap
* Apply suggestions from code review
All the requested changes by a collaborator were made.
* updated info.json of Vanana and readme files of Vanana and waffle
* rename LAYOUT_waaffle to LAYOUT_ortho_5x16
Also adjusts the info.json data to put a visual gap between the extension and main PCBs.
* make rules.mk and info.json specific to rev3
Removes nckiibs/waaffle as a build target, as it redirects to the only extant revision in the repository.
* add controller board build targets
Adds build targets for Pro Micro and Elite-C builds, with appropriate defaults for each.
Running `make nckiibs/waaffle/rev3` defaults to a Pro Micro-based build.
* fork rules.mk to be version-specific
* remove pimentoso/paddino02 as a keyboard target
This commit makes it so QMK API doesn't identify pimentoso/paddino02 as a build target on its own, because there's no actionable code here.
* add image to readme.md
* unify rules.mk files to QMK AVR template
- remove Bootloader selection comment block
- sort Build Option rules
- unify inline comments
Recent changes to QMK Configurator's API have made it so an info.json file is required for QMK Configurator to know how to render the keyboard in question.
This PR adds info.json files for keyboards that did not have them, with a few exceptions for boards whose layouts I was unable to determine.
* add info.json file for 2key2crawl
* add info.json file for 40percentclub/4x4
* add info.json file for 40percentclub/5x5
* add info.json file for 4pplet/aekiso60/rev_a
* add info.json file for 4pplet/steezy60/rev_a
* add info.json file for 6ball
* add info.json file for 7c8/framework
* add info.json file for aeboards/constellation
* add info.json file for alpine65
* add info.json file for aplyard/aplx6
* add info.json file for arch_36
* add info.json file for arisu
* add info.json file for box75
* add info.json file for butterstick
* add info.json file for four_banger
* add info.json file for geekboards/tester
* add info.json file for handwired/2x5keypad
* add info.json file for handwired/412_64
* add info.json file for handwired/42
* add info.json file for handwired/aplx2
* add info.json file for handwired/brain
* add info.json file for handwired/cans12er
* add info.json file for handwired/ck4x4
* add info.json file for handwired/d48
* add info.json file for handwired/dactyl_manuform/dmote/62key
* add info.json file for handwired/daishi
* add info.json file for handwired/hexon38
* add info.json file for handwired/jot50
* add info.json file for handwired/jotanck
* add info.json file for handwired/jotpad16
* add info.json file for handwired/k8split
* add info.json file for handwired/myskeeb
* add info.json file for handwired/nicekey
* add info.json file for handwired/onekey
* add info.json file for handwired/postageboard
* add info.json file for handwired/riblee_f401
* add info.json file for handwired/riblee_f411
* add info.json file for handwired/rs60
* add info.json file for handwired/splittest
* add info.json file for handwired/trackpoint
* add info.json file for handwired/traveller
* add info.json file for hhkb_lite_2
* add info.json file for honeycomb
* add info.json file for ivy/rev1
* add info.json file for keebio/viterbi
* add info.json file for laptreus
* add info.json file for latin47ble
* add info.json file for latin64ble
* add info.json file for launchpad/rev1
* add info.json file for lets_split_eh/eh
* add info.json file for mechmini/v1
* add info.json file for meira
* add info.json file for meishi
* add info.json file for merge/iso_macro
* add info.json file for mschwingen/modelm
* add info.json file for pabile/p20
* add info.json files for pimentoso/paddino02
rev1, rev2/left, and rev2/right
* add info.json file for rgbkb/pan
* add info.json files for runner3680
3x6, 3x7, 3x8, 4x6, 4x7, 4x8, 5x6, 5x7, and 5x8
* add info.json file for sck/gtm
* add info.json file for splitish
* add info.json file for standaside
* add info.json file for ungodly/launch_pad
* add info.json file for xelus/trinityxttkl
* Revert "add info.json file for rgbkb/pan"
This reverts commit 280b89bc6157023a621a9864f5d74d59d62bb511.
* correct maintainer for ivy/rev1
* Fix keycode mappings for via and ensure they don't change within protocol
* Update keycodes
* Fix broken keyboards
* added the missing keycodes found in via
* Remove invalid keycodes
Co-authored-by: David Hoelscher <infinityis@users.noreply.github.com>
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* revert changes
The code was moved to the "ferris" directory.
Fixes the following commands:
```
qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/default/keymap.json
qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/pierrec83/keymap.json
```
Addresses this issue:
https://github.com/pierrechevalier83/ferris/issues/5
* add support for Bbm68rgb
* pull request changes filled
* pull request changes filled(this time for real)
* added new line to files that did not have new lines at end of file
* updated modifier keys for rgb effects
* Update keyboards/bm68rgb/readme.md
* Apply suggestions from code review
* Apply suggestions from code review
* add nkro suppport
* Update keyboards/bm68rgb/rules.mk
* modified keymap to better correspond to physical layout
* updated comment style
* Adding Files for Zodiark
* zodiark.h and keymap.c layout corrections
* Apply suggestions from code review
Applied all suggestions from zvecr.
Co-authored-by: Joel Challis <git@zvecr.com>
* Applied all suggestions from fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Defined matrix driver
* Update keymap with GPL2
* Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap
* Apply suggestions from code review
Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added VIA keymap
* Corrected VIA Keymap oled.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added boston keyboard
* Added Boston keyboard
* Changed some keycodes, added layers, added encoder layer change, added RGB layer indicator
* Cleaned up whitespace
* Update config.h
Cleaned up whitespace
* Cleaned up whitespace
* Added keyboard_post_init_kb code for RGBLEDs so that they start on a defined color
* Modified layout so that split backspace right is at a more intuitive location for configurator
* Cleaned up whitespace, changed some labels
* Modified keymap to accommodate revised layout in boston.h
* Removed "on port C6" from Line 20 (committed suggestion)
* Removed "Encoder Enable" from Line 8 (committed suggestion)
* Removed empty #define DESCRIPTION as suggested
* Implemented lock LED changes as suggested by drashna
* Implemented lock LED changes as suggested by Drashna, changed WS2812 driver byte order
* Updated HSV color codes to reflect WS2812 byte order change
* Implemented suggestion from noroadsleft
* Implemented suggestion from noroadsleft
* Updated readm.md per suggestions from noroadsleft
* Update keyboards/boston/readme.md per noroadsleft's suggestion
* Removed empty layers from default keymap
* Stripped empty layers and much code from default keymap ; moved to RGB Light Layers keycap
* Support for XO87 solderable version
* cleanup
* Remove abandoned code
* replaced KEYMAP with LAYOUT and moved LAYOUT macro to solderable.h. deleted unneeded files.
* Update keyboards/monstargear/xo87/solderable/keymaps/via/keymap.c
* update info.json with missing keys
* Apply suggestions from code review
* Apply suggestions from code review
correct layout macro
Keymap Minivan: configurable dual layout, many symbols, speed/text-size measuring
* Made center led color follow last activated layer color. Some led code clean up
* Reordered the _RAR layer, also putting GUI on the _ACC layer.
* Some issue with _FUN (see keymap.c FIXME), removed _FUN nested 'go to layer' key on _FUN.
* markdown formatting
* Update readme about _FUN top row issue (see keymap.c at XXX)
* Sentence order final bit was wrong by topic. White space fiddles.
* Minor comment editing
* minor comment adjustments
* leds are not modifiers, moved
* _FUN persistance on base layer only (XXX)
* The up/left to go to _LTR layer, now always goes to BASE (_LTR or _DDL).
Led indicators refldect this. No _DRA hold on base layer but _ACC. No
one shot to _FUN layer (seemed to make things confusing), but a TO().
* Some chatter about how to configure this map to your needs.
* language fixing
* Tried to make sense explaining how to access the descramble.
* language fix
* Seems there was a stale CSET_LTR/.*DDL, should be BASE_LTR/.*DDL, fixed.
* language, blabla
* Corrected stale _LTR into BASE
* Some documentation finetuning and trying to make it simple to understand
* language fixing
* language fixing
* Doing the utmost to explain it in a way I understand it too.
* language fixing, going ultra-verbose
* language fixing and formatting
* language fixing
* language fixing, formatting
* attempt to simplify explanations as much as possible
* added License to keymap.c (GPL), noted that _ACC and _DRA need work to
function in 'descramble' mode
* fixes regarding layer order, adding two layers, started on descramble
layers for _ACC and _DRA Unicode
* Noted some coming changes about F-layer and more descramble.
* changed globals to type 'bool'
* Changed F-layer by removing pre-modifier F keys, moved BASE direction
switches, added new incomplete descramble layers
* _FUN layer changes (comment fix)
* Led color fixes. Changed order of layers in the source (no user consequence).
* Added copyright authors (hope that is correct in GPL style/requirements).
* Switched on BASE layers the keys to activate _MOV with leftside _NSY:
more harmoneous, and _MOV can also be held by right hand.
* Follow Quantum indentation style more (mostly).
* On _NSY & _DDN, Tab follows _LTR. '-' moved to LShift, '.' moved, ','
created, shift(tab) removed.
* Added Linux Unicode input mode Accented characters on layers _DDA, _DDD
* added to Todo
* Added ijIJ to _ACC and _DDA layers (2nd last letter of Dutch alphabet).
* add todo point about navigation, fix -> "8th key"
* added 「」《》 to _DRA and _DDA
* Added 〇, ƒƑ. Altered Nav clusters with paging on outside, added thumb Page up/down to _MOV, brought _REV in line with recent _NSY changes (tab,-,enter,dot,comma). Harmonized tab on _Mov with other layer tabs (also a move command, moving cells).
* Added super- and sub-script for numbers on _DRA, _DDD.
* Added quotation marks „ “ ” to layers _DRA and _DDD.
* Added °〇•· to _DRA, _DDA
* § as an enumeration grouped with • (bullet), · as possibly math (middot or multiply) grouped with ±.
* Changed numbers to be on home-rows both hands, because thumb layer key does
not interfere alternating between hands for longer numbers (previous
reason for one-handed numbers). The unshifted symbols went left 2nd row,
because then the shifted versions can be accessed with shift if the
layout is replicated on a Pok3r (which is non-programmable right hand 2nd row.)
The logic has been harmonized with layers _DDN, _DRA & _DDD, _FUN, which
have number(-like) keys. It seems better this way. The symbols are layed
out more spaciously, each finger now does two symbols (2nd row, 4th
row). The numbers are more like they normally are, which feels more
natural, and should even the load between both hands and help with
alternating between hands when typing numbers.
Reason to change was looking into pressing ;, q, j, with ring-, middle-,
index-finger (moved one to the right from default Dvorak), because the
stagger makes it easier to reach that way, less loss of home row contact,
bending fingers more straight up and down. Downside became that left
index type 5 numbers, and that the normal finger matching (0 is pinky,
etc) was lost. With the new layout these potential problems are also resolved.
* Made descramble _DDN, _DDL representation show both raw and resulting layouts.
layouts.
* Added arrows, fleur and heart on _DRA and _DDD.
* Changed _FUN layer switching to incorporate the 'descramble' system
seemlessly. The 4 layer with a descramble twin will switch to either
depending on the descramble mode.
* Descramble mode with normal Unicode layers mostly done, except costum LT() to share the key with Delete/Alt on _DDL.
* Changed descramble mode keys to be just one on a cycle. Added full set
of Alt/Control/Shift multimodifiers to `_FUN` layer.
* Changed descramble mode keys to be just one on a cycle. Added full set
of Alt/Control/Shift multimodifiers to `_FUN` layer.
* format fix
* Descramble cycle key moved from row 1 to row 4 far right, to avoid
accidental press,
* The 'descramble' mode with normal Unicode encoding finished. Fixed
mistaken non-transparent key on _DRA and _DDD, removed tab from _RAR.
* stale layer comment fix _LTR/_DDL
* New layer-tap timed keys proved unreliable, longer tap term fixed it.
* The _FUN layer is a one-shot layer for the F-keys, but that can be toggled by the FUN< key on the _FUN layer (top row, 3rd).
Some additions to the readme.
* Comment improvements (layout tables)
* minor
* Made #defines to allow a user to easily switch to a WASD arrow layout.
* Added keys to switch leds on/off, to _RAR layer. Fixed wrong comment on 'APP' key in _RAR.
* comments fix regarding MLed, SLeds
* Added BASE to same key as _FUN on base layer, except layers with numbers/symbols.
Removed capital ƒ, and moved ± to that key. Added … on old spot of ±.
Some readme language editing, adding something about other keyboards, etc.
* small language fix
* Config.h: Removed unused #defines.
Readme: minor edits.
* minor language edits.
* Minor comment edit.
* Minor language fix.
* Minor language style edit.
* Removed unnecessary section 'personal remarks'
* Changed the top row in _DRA and _DDD. Super-/sub-script parenthesis to that location on _NSY, added currency symbols, reduced emoticons.
* minor formatting
* Added LGUI and RGUI on the _DRA/_DDD layer(s).
* Put RGUI on the base layer, on the _FUN layer switch key. This probably causes side-effects on
systems without where RGUI is not merely a modifier.
* Changed _FUN toggle on BASE to Rshift, because RGUI on some systems has a consequence when tapped by itself.
* Changed LGUI and RGUI around because LGUI is mostly used and on BASE layer. Some edits to last part of readme.md.
* Minor language fixed (L/R-GUI, use-case).
* some more blabla on use case of the map generally
* Changed name KC__[LR]GUI to KC__[XY]GUI for clarity wrt switching them.
* Removed left-arrow on Alt on _ACC and _DRA, for faster use with pointer device.
* Added the same system as is on RShift, to LShift, pointed it to _MOV layer.
* Changed left shift layer toggle to _DRA, because it has uncluttered shift, alt, control, for using those with a pointer device (mouse, stylus).
* Changed base layer left-shift tap from _DRA to _MOV, because _MOV toggled can be convenient generally, and it is a less dangerous layer to accidentally press, and it makes more sense to activate the navigation layer when editing in 3D software.
* The Power keys on _RAR now require Shift to be activated (accident prevention).
* fiddled with title
* more title fiddles
* Added RGUI on _FUN for future proofing the layout, harmonizing layers.
* Added ',' on _REV (number fraction division). Minor fix to documentation format.
* title fiddle
* Added LGUI, RGUI to _RAR, to harmonize with other layers and for potential future uses.
* Changed unnecessary transparent keycode on _AcC and _DDA to be 'nop', minor comment fixes.
* Added on _DRA and _DDD: ─━┄┅.
Fixed a bug in led layer colors (forgotten 'else', causing wrong color for _DDD).
* Some changes to conform to QMK readme.md standards (more necessary).
* Changed _REV into a numbers pad layer called _PAD, put on Lshift in BASE.
_REV layer (not used anyway) replaced with a layer that is basically
a layer where symbols that exist on _NSY (mostly) and on _LTR (few)
are existing in the same locations, but in the number pad variant of
that symbol. The goal is to make it easy to find, it is not meant for
single hand access quickly. The use is to deal with special shortcuts
like Blender has, which differentiate normal and numpad numbers/symbols.
For quick access it was put on the left shift in BASE layer.
* Added navigation arrangements to _PAD. Changed location of shift on _RAR.
The numbers on numpad are easy to find, but when these keys are in their
navigation variant with numlock on it becomes almost impossible. There
was room on the map to add an arrow row, and a row for the remaining
navigation keys, hence they where added. They are in a left handed
order, because there already is a right handed order on _MOV.
It still proved possible to accidentally trigger Power, due to erroneous
hitting 'shift' in BASE and then messing around by accident. With shift
on (BASE) space in _RAR, accidents should be reduced further, since it
is a combination never used.
* Added Tab on _ACC and _PAD
To facilitate Control-Tab (a blender shortcut). On _ACC the Tab is in its
correct place. On _PAD it messy because not on its correct place. Leaving
it there for now: easier to access Tab+Control with left hand only on the
modifiers in _PAD, and other hand on a pointer device. Tab has a potential
use to jump input cells, which may be used in combination with a numpad.
* _MOV layer: switched default layout to trangle navigation layout.
This only required to set the already existing #defines. I found
the flat layout not intuitive, the triangle layout has no left/rigth hand problem.
The higher buttons for the mouse where not correctly ordered, so they where re-ordered.
* Triangle navigation by default. Added pictures of layout to readme.md
* Layer names on images.
* Changed image for layer _DRAW slightly.
The shifted symbol to the lower right.
* Image for _PAD corrected for no-action and Tab.
* Added a paragraph about why this layout is good to use.
* removed 'modifiers' paragraph
* Some text improvements in paragraph on what is good about this layout.
Fiddle on the title as well.
* Added Del on _DRAW layer.
Some minor text fiddles here and there.
* Removed word "descramble" in image layer _RAR.
* Improved key 'sticky' and altered image size (test).
* Rescaled image for layer FUN
* Unicode in its own file. Bug fix: _DDA 'ï' printed a capital.
Upon a suggestion from QMK Discord #programming, the macros and
unicode is put in a separate file, because keymap.c got large.
An erroneous numerical value for ï was fixed.
Author e-mail is updated to a new e-mail adres.
* Added an image to illustrate 'descramble' mode.
* Changed explicit e-mail to link, to reduce spam bot trolling.
* Added a Qwerty+Dvorak compile time version.
It seemed the overall design (accented, Unicode, stuff) could be useful
for Qwerty typers (of which there are so many). This was done by #if(n)def
out/in a fair amount of code here and there, and creating 4 replacement
layers in a new file qwerty_dvorak.c, also with its own readme in
qwerty_dvorak.md. The 'descramble' switch system is re-used here to
switch from Qwerty to Dvorak.
The new code is put in qwerty_dvorak.c, which starts with an extensive
comment about why and how it works.
Fix: Docs, a stale "_MOV" was replaced with "_PAD" in the readme.md for _DDL.
* Changed image hosting.
Downtime, problems registering: resorting to my own domain.
* minor text order changes
* Some text improvements.
* Added a compile option to easily change what layer is active on startup.
This layer can be plain Dvorak or 'descrambled' Dvorak, if
QWERTY_DVORAK is not set. It can be Qwerty or Dvorak if it is set.
Just some simple #define statements.
* Added graphics for Qwerty+Dvorak, and improved documentation.
Added the whole set of layers also to qwerty_dvorak.md, because
it seemed it would get even more confusing to have a user cross
reference it between the two files.
* Some simple text improvements
* Numbers/symbols layer keys on BASE to DRAW when both pressed.
The two keys besides the space bars go to DRAW layer when pressed
simultaneously. (This is inspired on the Planck's 'adjust' layer,
pressing both 'lower' and 'raise' together.) All layers can now
(relatively) comfortably be reached. This change was necessary
because it was cumbersome to reach the DRAW layer with the right
pinky and then type with the right hand. _RAR is now not super
easy, but it is a 'rare' layer anyway.
* Added compile + flash section in readme.
* Corrected documentation: 'mouse on ... hand'
* Removed up/down arrow ⮙⮛ on _DRA and _DDD, because the hex file was too large.
Due to pulling the master repository, changing nothing in this keymap, the
code compiled as 2 bytes too large, where before it had been 2 bytes left free.
Some compile options have been created, to make it easy to cut out up/down
arrow on the 'descramble' _DDD layer, and/or the normal _DRA layer, and/or
dashes ┄┅ on the 'descramble' _DDD layer. The 'normal' layer cut out of arrows
yields little benefit, but it keeps all layers exactly the same between 'descramble'
and normal mode. For Qwerty compilation, you will want to not cut out anything,
requiring to edit the user compile options in keymap.c (top).
* Resolved size issue with QMK #defines, re-instated ⮙⮛, removed RGUI on _FUN.
Various #defines tested to reduce space, NO_ACTION_MACRO NO_ACTION_FUNCTION
worked. Therefore the cutting out of the up/down arrows was no longer
needed. The #defines to easily remove them have been left in place.
RGUI made _FUN confusing with the multi-modifiers, thus taken out. Multi-
modifiers now logically cascade without skipping a key.
* Improved image files with led colors and some tweaks.
* Updated graphics file for Dvorak in QWERTY_DVORAK compile option.
The led colors where not correct because the graphics for standard
Dvorak was being re-used.
* Fixed for re-instating arrow up/down for space.
* Activation marker on _FUN layer in documentation altered.
It looked like it was a symbol.
* Made startup layer explicit in code.
Startup layer follows 'descramble' on/off user #define setting.
* Marker for BASE activation for _PAD, _MOV: fixed.
There was a stale marker in the documentation layouts for _MOV: removed.
The same marker for _PAD was improved.
* Code optimizations suggested on pull request #8066https://github.com/qmk/qmk_firmware/pull/8066
Some things moved to config.h, rules.mk
Changed layer_on/_off to layer_move(..)
Removed a global variable, changed literal type on a function.
Code is now a lot smaller, hence removed readme.md entry on that.
Removed "not shown" on 'descramble' leds in qwerty readme (mistake).
* Compile option to change ƒ into €.
Since it's a west european keymap, maybe someone likes the euro currency on it.
(It was not on it because I don't like ...)
* default to ƒ on keymap
* Removed print sheet for layout *.odt file.
Changing this to text/markdown seems to reduce the use of this file
to a point that it may be better to delete it. There is also the
graphics now, which might be better to print.
* Updated the seller/maintainer of the board to: The Key Dot Company LLC.
https://thekey.company/blogs/blog-updates/thekey-company-acquires-minivan
* Changed external links to website to plain text.
The markdown link is caught by the github cammo system.
* Last free spot on the map made easy to configure.
One spot was still free (Unicode _DRA/_DDD layer). This puts a #define
on top of unicode_macros.c, to make it easy for a user to put in their
own symbol.
Put placeholder 🛠 in there. That symbol is not represented in the
documentation (maybe it should, it is a nice symbol).
* Removed space saving #defines.
These became obsolete clutter, now that there is enough space thanks to
LINK_TIME_OPTIMIZATION_ENABLE.
* Added tokens to simplify compiling for 45/46 keys.
An attempt to make it easy to switch on a #define between
various hardware configurations (44, 45, 46 keys) failed.
This: #define J1 , KC_A // seems to have failed to be
recognized as a key definition.
error: error: macro "LAYOUT_command" requires 45 arguments, but only 44 given
Left in are some code tokens (J1-J4) and #defines that need
at least bulk replacement in keymap.c and optionally qwerty_dvorak.c,
to compile for such hardware configurations. It would be nice
if this could be done better.
* User can easily compile for 45, 46 hardware keys.
Added some #ifdefs around optional keys in the keymap, to allow
compiling for 45 and 46 keys. Left the earlier made code with the
J1_J2 etc. tokens, which could still be used to port the map to
a board with even more keys. This fixes earlier mentioned problem.
* Arrow cluster for 'arrow' hardware configuration.
This is a user configurations option in the keymap.c, to have
an arrow cluster around the additional key for 'arrow' hardware.
The arrow cluster is however not on the base layer (no room). The
additional key is used to switch to the _MOV layer. There it becomes
a down arrow in the arrow cluster.
To make this work with the default _MOV layer, the right hand
keys on the 2nd row where moved one spot to the left, for the 'triangle'
arrow configuration (mouse right). This is a trivial change.
There was a bunch of language improvements to the documentation,
including graphics.
The symbol 🛠 is now listed.
The program seems to be reliable, as far as used and tested.
* Correction of mark-down formatting.
_MOV layer 'arrow' cluster documentation rendered incorrectly
(attempt to add newline).
* Markdown formatting mistake correction.
Adding a newline at 'Layers (text)' chapter.
* Moving the graphics about 'arrow' to topic.
The graphic explaining what 'arrow' with arrow cluster means,
should be where that is mentioned under compile options.
* Editor token J3_J4 moved to avoid arrow cluster.
If one wants to insert a key by bulk replacing J3_J4, and has
activated the 'arrow' layout arrow cluster, this new key would
be inside the arrow cluster, hence it was moved to the left.
* Æstethics of image 'arrow' layout, arrow cluster.
Shading corrected/nicer.
* Corrected image link in readme.md
Illustration 'arrow' layout, arrow cluster.
* Fix: Toggle to BASE layer leaked. South-paw key.
When toggling to a non-BASE layer, either on the _FUN layer or
using the 'arrow' cluster for 'arrow' layout, on the BASE layer to
toggle to _MOV, the layer changed on the down-stroke, causing a
character to leak. These layer switch macros now alter layer on the
up stroke.
There seems to have been an accidental code deletion: #define MORE_key1.
This defines what the additional hardware key for 'South Paw' ('Command')
should be.
* User compile option comments easier to read.
The phrases "uncomment" and "comment out" are confusing.
Replaced by _activate_ and _remove_.
* Put user compile options back to default Minivan.
Accidentally left the compile options for number of Minivan keys
in the wrong state while git pushing.
* Rewording a comment in the user compile options.
Clearer language.
* Leds indicate Caps/Num-lock.
Leds green/blue switch depending on numlock for numbers-pad layer _PAD.
BASE layer led brightens when capslock is on.
* _PAD had the wrong period, fixed.
_PAD layer had the KC_DOT instead of KC_KP_DOT.
* Options for navigation keys arrow hardware key.
Compile options added to have a complete navigation cluster around
the additional hardware key for 'arrow' layout, both for triangle
left handed arrows and flat right handed arrows.
* Added _FUN layer in text Qwerty.
_FUN text layer was by mistake missing/deleted in the qwerty-dvorak readme.
* Added graphical visualization of all layers.
* Graphics: _RAR 'Capslock', _NSY '~' corrected.
Text representation of layers was correct, graphics corrected.
* Compile Option arrows in a vi(1) editor layout.
Vi(1) is a much loved editor, with its own peculiar arrow layout
on HJKL (as it appears in Qwerty). It seems possible some Qwerty
vi users might find it fun this way for regular arrows as well.
The 'arrow' hardware layout, compiled with arrow cluster, follows
the vi(1) arrow arrangement.
* More layer overview graphics files for the readmes.
Added a '40% x 400%' to the 3D layer overview image (top).
Added overview of all layers in a readable way (Dvorak² only).
Added a guide to show where what is similar on layers. This should help with learning.
Added a graphic showing what key activates what layer.
Added graphics that show what layer subsets are active in certain modes (Dvorak² and Qwerty/Dvorak).
Fixed mistake: _Tab_ missing in layer `_PAD` graphics file.
* 'Tab' inserted in overview graphics for _PAD layer.
* Corrected mistake in similar layer keys.
LGUI on _ACC
* Added overview graphics for Qwerty/Dvorak.
Overview of layers, similar keys on similar layers, activation.
* Compile option to change ⮘ ⮙ ⮚ ⮛ into ☐ ☒ ☑ 🗹
Layer _DRA, _DDD. Checkboxes seem handy for lists. Set default on in
keymap.c. Pointers seem rarely useful. Right arrow sometimes as a bullet
point marker. All affected graphics updated.
* First overview image correction.
Last layer is not 'symbols' due to its numbers.
Some art improvement.
* Minor tekst correction (author Minivan config).
* Short features overview and git lib fix.
* note⁴ as example
* Improvements all over the place.
The keymap is now modular dual layout. There is a common system,
and there can then be two letter/numbers layer pairs be compiled
with it, which are separately defined and documented in ./bases…
files.
Speed measuring and text size counting added.
There is an additional Unicode layer, for a total of three.
The “descramble Dvorak” layer is now just a function, as was
originally intended.
* Wrong link to Dvorak manual, stray ‛r’ character.
* Splitting the layouts so they are not pairs of 4.
The layers had been configurable only as a set of a BASE and letter
layer with another BASE and letter layer: Dvorak + Dvorak² and
Qwerty+Dvorak.
Now Dvorak, Dvorak² and Qwerty can be individually configured, to
be on either the Default or Alternate spots in the dual layout
(Dvorak² only supports Alternate, due to its “_HALF_ descramble” mode).
* Added Colemak layout.
Some tidying up of documentation wrt DEF/ALT base layer identifiers.
Fixed missing ‛:’ on the graphics for Qwerty.
* stale letter
* fix modified submodules
* removed redundant code
testing twice for non-zero
* Speed measuring precision fix.
The calculation of “int speed;” caused great loss of precision.
* Added overview of layers by key.
Makes it easier to see the associations of meanings per key.
* Dvorak descramble by key overview
Forgot to add.
* Minor readme format fiddle.
* Graphics: blank keys are grey, fix one mistake.
* Compilation as a single layout.
Layer definitions _ALT_BASE and _ALT_NSY (enum) are simply #redefined
as preprocessor numbers equal to _DEF_BASE and _DEF_NSY (see user_config.h,
lowest reference to MINIFAN_SINGLE_LAYOUT).
* Single layout compile option
See user_config.h lowest reference to MINIFAN_SINGLE_LAYOUT for the why of the how.
* RShift toggles to _RAR when held ≥ 500 ms.
“Qwerty with arrows on BASE”, will need a key to _RAR layer.
It mirrors the behavior of LShift. It is generally useful.
Removed useless user options regarding LShift layer toggle.
It will have to be _PAD.
* Layer switch graphic update per last push.
Forgot to update the default base layer switching graphic.
* Preconfigured optional ‛Command’ hold key to _RAR layer.
This is a third way to reach the _RAR layer, useful if the furthest
right key on row 1 is changed to an uncluttered BASE layer arrow.
This further prepares the way for a Qwerty layout with arrows on BASE.
* Changed ‛Command’ hardware key to TG(_RAR)
MO(_RAR) doesn't work, because it doesn't follow a change in base
layers, which happens on _RAR.
* Corrected wrong all-layers-by-key upload readme.md
* More graphics = more fun: keycap view in readme.
Preparing to integrate a number pad base layer.
Shortened hold time for right/left Shift layer toggles to 200 ms.
* Too light grey for “1470” on three layout graphics.
* Added a numbers pad Base layout option.
This numbers pad layer is in the format of a numbers pad keyboard/cluster.
It has a second layer, which is normal for all Base layers. In this case,
the second layer provides sub-/super-script versions of the numbers, in the
same layout.
* Keycap view numpad improvements.
* Graphics: forgot to cut off southpaw/arrow on two keycap views.
* Preprocessor identifier for “MIT” Planck spacebar.
Trans-minivan preprocessor statements augmented with an identifier
which might work for a Planck keyboard with two unit spacebar.
At this point, the “trans minivan” code only could make porting
to other keyboards less of a chore. It remains untested. Only
visual inspection of the preprocessing regarding the amount of
keys in the layout has been done.
* Tweak of common layout graphic impression.
This would also allow indication of a number pad.
* Improved dual numpad layer & graphics.
All numbers/symbols seem to get affected by NumLock, hence they
all needed to show that in the graphic documentation. Tab was
removed in favor of Numpad ‛=’, and comma replaced by numpad-comma.
* Committing partial job on numpad Base layers.
Hardware problem here, don't want to loose the data.
* Three issues: header file, numpad Base, Tab key.
This should complete previous unexpected commit.
① Documentation and precedent for a base layer with its own header file,
base_NAME.h. This allows someone writing a new Base layer pair, to
(un)set user configuration options in user_config.h.
② Numbers pad Base layer added, different variants.
The common numbers pad also has a new optional layout (square), and can be
removed by user configuration option (because one might already compile with
the Base layer numbers pad)..
③ It turns out there was an easy solution to the Tab key anomaly.
Uncluttered Tab is now located both on BON and ACC layers, on intuitive
locations opposing Control, which is also in the right spot. Basic
modifiers for Tab works well now.
* Graphics for Base numpad single square: correction.
Showed wrong insertion key for 'command' / 'south paw' hardware key.
…
* ‛South paw’ default GUI. Graphics. TOC user config.
Made ‛south paw’ be GUI by default.
Improved graphics appearance.
Ordered options in user_config.h, added table of contents.
* User config cleanup & added a compact alternate.
The normal user configuration, which is heavily documented and
therefore a bit unwieldy, can now optionally be done in another
file, without any documentation.
* Base graphics fix, _ACC/_NSY hold switch option
* Added a Qwerty with arrows on base.
Added a graphic in readme for Dvorak descramble (for documentation predictability).
* Put `~ on the _BON layer.
① There was no uncluttered `~ available. On Qwerty Base Arrow
the `~ key got even more sidelined.
② Improved Qwerty Base Arrow manual.
* Option to harmonize Qwerty with Qwerty Base Arrow
Key ‛/?’ is different on Qwerty Base Arrow, which will lead
to typing arrows for people who have both kinds of Qwerty
running. This option adds this key in the same spot as where
it is on Qwerty Base Arrow, but only if Qwerty Base Arrow is
being compiled.
* See previous commit (Qwerty harmonization)
* Efficiency fix. +Workman layout.
Workman layout added.
Serious efficiency mistakes discovered and fixed:
① There was no check on Delete on Base layer, to see if another
key had been pressed. Fixed.
② The Shifts on Base did not provide a Shift for the _BON layer
accented characters. Fixed.
Fixing was painless, proving the code is stable and maintainable.
* Changed Tab/CTL on _ACC/_DRA, μ, T.O.C. readme.md
μ was forgotten (French), added on _ACC.
This caused Tab to get displaced and stacked with Control, which
ends up being better anyway. This also meant _ACC needed Left-Control,
and therefore _DRA needed to switch Tab and Control, because it needs
to complement _ACC with Right-Control (to be able to type all modifiers
with Tab).
➡ Overview graphics are not yet updated. _DRA and _ACC are now out of sync
in the graphics documentation. To be fixed soon.
Chapter on language support added in readme.
Table of Contents added to readme.
* Updated all graphics (_BON/_DRA Tab/Control/μ).
Some fiddles with readme.
* Led on/off at startup, RAlt on Base option.
It is hard to believe, but the todo que seems empty!
* Minor changes in readme.
* Minor documentation improvement (RAlt/_RAR).
* Minor changes readme.
Removed “not tested yet …”, because that becomes wrong once it is tested.
* Added a blank keycaps graphic.
* Lower saturation letters Dvorak-descramble keycap.
;-]
* One key change in personal keycap graphic.
;-]
* Forgot _NSY layer in keycap qwerty basearrow
* Moved speed/count startup setting in user_config.h
Moved to chapter startup settings.
(These last commits are more like some loose ends with the last
ongoing topics. It isn't active development, nothing new gets
started. If QMK requests more changes, even if it is a typo,
just let me know.)
* Travis Cl: “The LINK_TIME_OPTIMIZATION_ENABLE flag…
… has been renamed to LTO_ENABLE.. Stop.”
Changed it.
* Adds a link to external resources in readme.
A place to put gimp .xcf files if someone wants to
modify/port the keymap. Perhaps links to varieties
of Minifan on github. Maybe a video about the keymap,
and such. Stuff that doesn't belong/fit on github,
and is easy to update without pull requests.
* RGBLIGHT_ENABLE rules.mk fixed, leds off for nop
rules.mk RGBLIGHT_ENABLE can now be set to “no” without issue.
Compile option to have leds off in Default Base layer.
* Transparency bug fixed.
Default layer was not set. This remained a hidden mistake, until Qwerty
Base Arrow had a different layer hold key in one place.
* Graphics doc correction, L/Rshift toggle config
Qwerty Base Arrow fix: Keycap view showed unneeded and empty ‛South Paw’ key.
All layers by key shows 45 Minivan version, title said “44”.
Added user configuration options to alter what is on the short and long
toggle on Left and Right Shift.
* Improved “why this layout” in readme.
Wanted to add that numbers & symbols layer can be reached by both
thumbs. It seems quite a drawback if that is not possible, to
constantly need to hold down the same thumb, especially for programming ?
It seemed worthwhile to mention.
* Reduced size of readme, dvorak-descramble, todo.
Stuff got a bit out of hand.
* one letter typo
* renumbered readme, _fun_stay initialization
Renumbered readme chapters to start from 1 not 0. Other minor edits.
Sticky on/off for _FUN layer seemed to be unpredictable on startup.
* Letter Ñ (capital) fix.
I seem to remember messing with this recently,
must have damaged this letter :-(. Capital was missing.
* Bare bones base numpad all layer by key.
I seemed to have forgotten to hide the common layers for this version.
Which doesn't matter a whole lot but this is a bit better and as it was meant.
* Fix triggering of adjust layer in default lily58 keymap
* Remove unused extern
* Swap raise/lower in update_tri_layer_state call to match recommendation in PR checklist
* [Keyboard] spiderisland/split78: add MCP23018 reset code
Now, communication with the right side gets re-established
after unplugging it and plugging it back in.
* [Keyboard] spiderisland/split78: configure debouncing
I've been experiencing particularly bad bounce on the 'A' key.
Also, update maintainer github username
* concatenate config.h to 64key directory
* move rules.mk to 64key directory
This commit makes the firmware actually compile.
* insert complete rules.mk contents
Conforms the file to QMK's template.
* move info.json to 64key directory
* remove concertina.h
This file no longer serves a purpose now that everything is in the 64key directory.
* complete 64key readme.md
Conforms the file more to QMK's template.
