/* Copyright 2023 Brian Low
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#pragma once

#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
// Enabling this option changes the startup behavior to listen for an
// active USB communication to delegate which part is master and which
// is slave. With this option enabled and theres’s USB communication,
// then that half assumes it is the master, otherwise it assumes it
// is the slave.
//
// I've found this helps with some ProMicros where the slave does not boot
#define SPLIT_USB_DETECT

#define RGB_DISABLE_WHEN_USB_SUSPENDED     // turn off effects when suspended
#define SPLIT_TRANSPORT_MIRROR             // If LED_MATRIX_KEYPRESSES or LED_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 100  // limits maximum brightness of LEDs (max 255). Higher may cause the controller to crash.

// Vial Support
#define VIAL_KEYBOARD_UID {0xA7, 0xA7, 0x9C, 0x4C, 0xE0, 0xB8, 0x00, 0x8D}

// The four corners
#define VIAL_UNLOCK_COMBO_ROWS { 0, 5, 3, 8 }
#define VIAL_UNLOCK_COMBO_COLS { 0, 0, 0, 0 }


#define RGBLED_NUM 70
#define RGBLED_SPLIT {35,35}

#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_KEYPRESSES

#define BACKLIGHT_BREATHING