History

Ryan 5fda349018 Remove RGB keycodes from boards with no RGB config (#23709 )		2024-05-20 17:11:49 +10:00
..
keymaps	Remove RGB keycodes from boards with no RGB config (#23709 )	2024-05-20 17:11:49 +10:00
config.h	Move matrix config to info.json, part 3 (#19991 )	2023-03-11 00:34:34 +11:00
edda.c	Update GPIO API usage in keyboard code (#23361 )	2024-05-03 15:21:29 +10:00
keyboard.json	Migrate features from rules.mk to data driven - EFGH (#23248 )	2024-03-15 01:42:55 +00:00
readme.md	[Keyboard] Add Edda Keyboard (#13953 )	2021-08-12 06:59:07 -07:00

readme.md

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Keyboard Maintainer: martin
Hardware Supported: Edda PCB

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.