History

Joel Challis 831deac212 Migrate build target markers to keyboard.json (#23293 )		2024-03-30 11:31:50 +00:00
..
keymaps/default
config.h
halconf.h
keyboard.json	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
mcuconf.h
readme.md

readme.md

humble40

A 12.5u WKL 40% offering uniform and standard row stagger configurations.

Keyboard Maintainer: Eye Oh Designs
Hardware Supported: humble40 (RP2040 MCU)
Hardware Availability: Group buy took place between 2022-06-17 1900 UTC and 2022-07-09 0400 UTC on Eye Oh Designs

Make example for this keyboard (after setting up your build environment):

make eyeohdesigns/humble40:default

Flashing example for this keyboard

make eyeohdesigns/humble40:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
Physical reset button: Short the two holes in the PCB marked TP6 and plug the board in.
Keycode in layout: There is no key mapped to QK_BOOT in the pre-provided keymaps, but you may assign this key in any keymaps you create.

Flashing

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.