qmk-keychron-q3-colemak-dh/keyboards/keebzdotnet/fme
James Young 2e0498080f
Migrate LOCKING_*_ENABLE to Data-Driven: K, Part 2 (#23769)
Affects:

  - `keebio/bamfk4`
  - `keebio/bdn9/rev1`
  - `keebio/bdn9/rev2`
  - `keebio/bfo9000`
  - `keebio/bigswitchseat`
  - `keebio/choconum`
  - `keebio/dilly`
  - `keebio/dsp40/rev1`
  - `keebio/ergodicity`
  - `keebio/foldkb/rev1`
  - `keebio/fourier`
  - `keebio/iris/rev1`
  - `keebio/iris/rev1_led`
  - `keebio/iris/rev2`
  - `keebio/iris/rev3`
  - `keebio/iris/rev4`
  - `keebio/kbo5000/rev1`
  - `keebio/levinson/rev1`
  - `keebio/levinson/rev2`
  - `keebio/levinson/rev3`
  - `keebio/nyquist/rev1`
  - `keebio/nyquist/rev2`
  - `keebio/nyquist/rev3`
  - `keebio/quefrency/rev1`
  - `keebio/quefrency/rev4`
  - `keebio/quefrency/rev5`
  - `keebio/rorschach/rev1`
  - `keebio/sinc/rev1`
  - `keebio/sinc/rev2`
  - `keebio/tragicforce68`
  - `keebio/tukey`
  - `keebio/viterbi/rev1`
  - `keebio/viterbi/rev2`
  - `keebio/wavelet`
  - `keebio/wtf60`
  - `keebsforall/coarse60`
  - `keebsforall/freebirdnp/lite`
  - `keebsforall/freebirdnp/pro`
  - `keebsforall/freebirdtkl`
  - `keebwerk/nano_slider`
  - `keebzdotnet/fme`
  - `keebzdotnet/wazowski`
  - `keyboardio/atreus`
  - `keycapsss/kimiko/rev1`
  - `keycapsss/o4l_5x12`
  - `keygem/kg60ansi`
  - `keygem/kg65rgbv2`
  - `keyhive/absinthe`
  - `keyhive/ergosaurus`
  - `keyhive/lattice60`
  - `keyhive/maypad`
  - `keyhive/navi10/rev0`
  - `keyhive/navi10/rev2`
  - `keyhive/navi10/rev3`
  - `keyhive/opus`
  - `keyhive/southpole`
  - `keyhive/ut472`
  - `keyprez/bison`
  - `keyprez/corgi`
  - `keyprez/rhino`
  - `keyprez/unicorn`
  - `keysofkings/twokey`
  - `keystonecaps/gameroyadvance`
2024-05-22 22:14:00 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: K, Part 2 (#23769) 2024-05-22 22:14:00 +01:00
matrix_diagram.md keebzdotnet FMe Layout Additionns (#20696) 2023-05-03 18:06:58 -07:00
readme.md [Keyboard] Add F.Me Macropad (#12658) 2021-05-26 22:17:13 -07:00

F-Me Macropad

F Me macropad

A macropad designed after a meme board seen on Reddit.

Getting the board into bootloader mode:

To flash firmware onto this board, you'll need to bring the PCB into bootloader mode. To enter bootloader mode, press the reset button on the back of the PCB twice. The reset button is located in the top left corner near the indicator LED.

Make example for this keyboard (after setting up your build environment):

make keebzdotnet/fme:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.