keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
vial
qmk-keychron-q3-colemak-dh/keyboards/viktus/styrka
History
James Young 04bf30aad8
Migrate LOCKING_*_ENABLE to Data-Driven: U-V (#23786) 
Affects:

  - `uk78`
  - `ungodly/nines`
  - `unikeyboard/diverge3`
  - `unikeyboard/divergetm2`
  - `unikeyboard/felix`
  - `uranuma`
  - `utd80`
  - `v60_type_r`
  - `vagrant_10`
  - `viendi8l`
  - `viktus/at101_bh`
  - `viktus/omnikey_bh`
  - `viktus/smolka`
  - `viktus/sp111`
  - `viktus/styrka`
  - `viktus/z150_bh`
  - `vitamins_included/rev1`
2024-05-23 19:40:41 +01:00
..
keymaps Delete trivial keymap readmes (#23714) 2024-05-17 23:49:29 +01:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: U-V (#23786) 2024-05-23 19:40:41 +01:00
readme.md

readme.md

Viktus Styrka

Styrka

The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.

The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).

On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.

Make example for this keyboard (after setting up your build environment):

make viktus/styrka:default

Flashing example for this keyboard:

make viktus/styrka:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.