keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0a48d82c3a
qmk-keychron-q3-colemak-dh/keyboards/studiokestra/galatea
History
WrinkleKrinkles 0a48d82c3a
Adding support for StudioKestra Galatea TKL (No RGB) + Xelus Ninjin (#190) 
* VIAL ported to Vega

Readme.md for changes

* Adding support for StudioKestra Galatea TKL

No RGB underglow version; tested using StudioKestra Galatea x GeonWorks TKL PCB.

Built and tested in 7U, WKL, F12 layout.

* Add VIAL support for Ninjin TKL

Build file 49502 bytes.

No features were removed; firmware was tested on ANSI, F12, WK layout.
2022-06-30 22:28:17 -06:00
..
keymaps Adding support for StudioKestra Galatea TKL (No RGB) + Xelus Ninjin (#190) 2022-06-30 22:28:17 -06:00
rev1 Studio Kestra Galatea: add (#16218) 2022-02-04 17:50:27 -08:00
rev2 Studio Kestra Galatea: add (#16218) 2022-02-04 17:50:27 -08:00
config.h [Keyboard] Add Galatea TKL PCB. (#15290) 2021-11-29 00:17:26 -08:00
galatea.c [Keyboard] Add Galatea TKL PCB. (#15290) 2021-11-29 00:17:26 -08:00
galatea.h [Keyboard] Add Galatea TKL PCB. (#15290) 2021-11-29 00:17:26 -08:00
readme.md [Keyboard] Add Galatea TKL PCB. (#15290) 2021-11-29 00:17:26 -08:00
rules.mk [Keyboard] Add Galatea TKL PCB. (#15290) 2021-11-29 00:17:26 -08:00

readme.md

Galatea

TKL H87/88c compatible PCB with support for the most common layouts.

  • Keyboard Maintainer: Studio Kestra
  • Hardware Supported: studiokestra.ca/galatea
  • Hardware Availability: In-Stock Sale (Dec 2021)
  • Rev1 firmware is used for Galatea PCBs with no RGB underglow.
  • Rev2 firmware is used for Galatea PCBs with RGB underglow.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the R key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/galatea/rev1:default

If no revision is specified, it will build rev1 firmware by default.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.