3c58f98929
* PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme
106 lines
3.8 KiB
C
106 lines
3.8 KiB
C
/*
|
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
Copyright 2015 Jack Humbert
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#define PRODUCT Tractyl Manuform(5x6) BlackPill
|
|
|
|
// wiring of each half
|
|
#define MATRIX_COL_PINS \
|
|
{ A15, B3, B4, B5, B6, B7 }
|
|
#define MATRIX_ROW_PINS \
|
|
{ B12, B13, B14, B15, A8, A10 }
|
|
|
|
#define UNUSED_PINS \
|
|
{ C15 }
|
|
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */
|
|
#define SPLIT_HAND_PIN C14 // high = left, low = right
|
|
|
|
// WS2812 RGB LED strip input and number of LEDs
|
|
#define RGB_DI_PIN A1
|
|
#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
|
|
#define WS2812_PWM_CHANNEL 2 // default: 2
|
|
#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
|
#define WS2812_EXTERNAL_PULLUP
|
|
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
|
|
#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
|
#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
|
#define WS2812_PWM_TARGET_PERIOD 800000
|
|
|
|
|
|
#define RGBLED_NUM 52
|
|
#define RGBLIGHT_SPLIT
|
|
#define RGBLED_SPLIT \
|
|
{ 26, 26 }
|
|
|
|
#define DEBUG_LED_PIN C13
|
|
|
|
/* Audio config */
|
|
#define AUDIO_PIN B1
|
|
#define AUDIO_PWM_DRIVER PWMD3
|
|
#define AUDIO_PWM_CHANNEL 4
|
|
#define AUDIO_PWM_PAL_MODE 2
|
|
#define AUDIO_STATE_TIMER GPTD4
|
|
|
|
/* serial.c configuration for split keyboard */
|
|
#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
|
|
#define SERIAL_USART_TX_PIN A2
|
|
#define SERIAL_USART_RX_PIN A3
|
|
#define SERIAL_USART_DRIVER SD2
|
|
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
|
|
#define SERIAL_USART_SPEED 921600
|
|
|
|
#define CRC8_USE_TABLE
|
|
#define CRC8_OPTIMIZE_SPEED
|
|
|
|
/* i2c config for oleds */
|
|
#define I2C_DRIVER I2CD1
|
|
#define I2C1_SCL_PIN B8
|
|
#define I2C1_SDA_PIN B9
|
|
#define I2C1_SCL_PAL_MODE 4
|
|
#define I2C1_SDA_PAL_MODE 4
|
|
#define I2C1_CLOCK_SPEED 400000
|
|
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
|
|
|
|
/* encoder config */
|
|
#define ENCODERS_PAD_A \
|
|
{ A13 }
|
|
#define ENCODERS_PAD_B \
|
|
{ A14 }
|
|
|
|
/* spi config for eeprom and pmw3360 sensor */
|
|
#define SPI_DRIVER SPID1
|
|
#define SPI_SCK_PIN A5
|
|
#define SPI_SCK_PAL_MODE 5
|
|
#define SPI_MOSI_PIN A7
|
|
#define SPI_MOSI_PAL_MODE 5
|
|
#define SPI_MISO_PIN A6
|
|
#define SPI_MISO_PAL_MODE 5
|
|
|
|
/* eeprom config */
|
|
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
|
|
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
|
|
|
|
/* pmw3360 config */
|
|
#define PMW33XX_CS_PIN B0
|