484c85bd0d
* adding default settings to support 3v ERM vibration motors * set default settings of haptic motor for LV061228B-L64-A 2v LRA * update ishtob keymap and fix config settings
203 lines
5.5 KiB
C
203 lines
5.5 KiB
C
/*
|
|
* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef REV3_CONFIG_H
|
|
#define REV3_CONFIG_H
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define DEVICE_VER 0x0003
|
|
|
|
#undef MATRIX_ROWS
|
|
#undef MATRIX_COLS
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 5
|
|
#define MATRIX_COLS 15
|
|
|
|
|
|
//Audio
|
|
#undef AUDIO_VOICES
|
|
#undef C6_AUDIO
|
|
|
|
#ifdef AUDIO_ENABLE
|
|
#define STARTUP_SONG SONG(PLANCK_SOUND)
|
|
// #define STARTUP_SONG SONG(NO_SOUND)
|
|
|
|
#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
|
|
SONG(COLEMAK_SOUND), \
|
|
SONG(DVORAK_SOUND) \
|
|
}
|
|
#define AUDIO_CLICKY
|
|
/* to enable clicky on startup */
|
|
//#define AUDIO_CLICKY_ON
|
|
#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
|
|
#endif
|
|
|
|
//configure qwiic micro_oled driver for the 128x32 oled
|
|
#ifdef QWIIC_MICRO_OLED_ENABLE
|
|
|
|
#undef I2C_ADDRESS_SA0_1
|
|
#define I2C_ADDRESS_SA0_1 0b0111100
|
|
#define LCDWIDTH 128
|
|
#define LCDHEIGHT 32
|
|
#define micro_oled_rotate_180
|
|
|
|
#endif
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 6
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
//#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
//#define LOCKING_RESYNC_ENABLE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/* key combination for magic key command */
|
|
#define IS_COMMAND() ( \
|
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
)
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
/*
|
|
* MIDI options
|
|
*/
|
|
|
|
/* Prevent use of disabled MIDI features in the keymap */
|
|
//#define MIDI_ENABLE_STRICT 1
|
|
|
|
/* enable basic MIDI features:
|
|
- MIDI notes can be sent when in Music mode is on
|
|
*/
|
|
|
|
#define MIDI_BASIC
|
|
|
|
/* enable advanced MIDI features:
|
|
- MIDI notes can be added to the keymap
|
|
- Octave shift and transpose
|
|
- Virtual sustain, portamento, and modulation wheel
|
|
- etc.
|
|
*/
|
|
//#define MIDI_ADVANCED
|
|
|
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
|
//#define MIDI_TONE_KEYCODE_OCTAVES 2
|
|
|
|
/* Haptic Driver initialization settings
|
|
* Feedback Control Settings */
|
|
#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
|
|
#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
|
|
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
|
|
|
|
/* default 3V ERM vibration motor voltage and library*/
|
|
#if FB_ERM_LRA == 0
|
|
#define RATED_VOLTAGE 3
|
|
#define V_RMS 2.3
|
|
#define V_PEAK 3.30
|
|
/* Library Selection */
|
|
#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
|
|
|
|
/* default 2V LRA voltage and library */
|
|
#elif FB_ERM_LRA == 1
|
|
#define RATED_VOLTAGE 2
|
|
#define V_RMS 2.0
|
|
#define V_PEAK 2.85
|
|
#define F_LRA 200
|
|
/* Library Selection */
|
|
#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
|
|
|
|
#endif
|
|
|
|
|
|
/* Control 1 register settings */
|
|
#define DRIVE_TIME 25
|
|
#define AC_COUPLE 0
|
|
#define STARTUP_BOOST 1
|
|
|
|
/* Control 2 Settings */
|
|
#define BIDIR_INPUT 1
|
|
#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
|
|
#define SAMPLE_TIME 3
|
|
#define BLANKING_TIME 1
|
|
#define IDISS_TIME 1
|
|
|
|
/* Control 3 settings */
|
|
#define NG_THRESH 2
|
|
#define ERM_OPEN_LOOP 1
|
|
#define SUPPLY_COMP_DIS 0
|
|
#define DATA_FORMAT_RTO 0
|
|
#define LRA_DRIVE_MODE 0
|
|
#define N_PWM_ANALOG 0
|
|
#define LRA_OPEN_LOOP 0
|
|
/* Control 4 settings */
|
|
#define ZC_DET_TIME 0
|
|
#define AUTO_CAL_TIME 3
|
|
|
|
//#define RGBLIGHT_ANIMATIONS
|
|
|
|
//#define RGBLED_NUM 10
|
|
//#define RGB_DI_PIN B5
|
|
//#define DRIVER_LED_TOTAL RGBLED_NUM
|
|
|
|
//#define RGB_MATRIX_KEYPRESSES
|
|
#endif
|