keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1e3b360c1f
qmk-keychron-q3-colemak-dh/keyboards/plywrks/lune
History
James Young ac603aec1d
plywrks Lune Layout Touch-Up (#20775) 
* add matrix_diagram.md

* info.json: apply friendly formatting

* rename LAYOUT_all to LAYOUT_alice_split_bs

* add LAYOUT_alice

* enable Community Layout support
2023-05-08 12:45:27 -07:00
..
keymaps plywrks Lune Layout Touch-Up (#20775) 2023-05-08 12:45:27 -07:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json plywrks Lune Layout Touch-Up (#20775) 2023-05-08 12:45:27 -07:00
lune.c Move single LAYOUT_alls to data driven (#20430) 2023-04-15 21:08:15 +10:00
matrix_diagram.md plywrks Lune Layout Touch-Up (#20775) 2023-05-08 12:45:27 -07:00
readme.md [Keyboard] Add Plywrks Lune (#17057) 2022-08-23 10:55:59 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Lune

Lune

Lune: a plateless, screwless ergonomic 60 percent with an OLED screen. Specs: 16.5mm front height, 5 degrees typing angle, interchangeable brass top, daughterboard

  • Keyboard Maintainer: Ramon Imbao
  • Hardware Supported: ATmega32u4

Make example for this keyboard (after setting up your build environment):

make plywrks/lune:default

To get to the bootloader, simply press the reset button located on the back of the PCB. You can then flash new firmware onto it.

Flashing example for this keyboard:

make plywrks/lune:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.