History

Purdea Andrei 2326c8f747 overnumpad controller: Add support for turning off solenoid enable in low power. (#15021 )		2021-11-02 20:49:23 +11:00
..
config.h	overnumpad controller: Add support for turning off solenoid enable in low power. (#15021 )	2021-11-02 20:49:23 +11:00
overnumpad_1xb.c	overnumpad controller: Add support for turning off solenoid enable in low power. (#15021 )	2021-11-02 20:49:23 +11:00
overnumpad_1xb.h
readme.md
rules.mk	Split out HAPTIC_ENABLE to have separate DRIVER option (#14854 )	2021-10-18 12:55:44 +01:00

readme.md

unicomp/spacesaver_m_pre_2013/overnumpad_1xb

Support Unicomp Spacesaver M keyboards with pre-2013 bottom row.

Keyboard Maintainer: Purdea Andrei
Hardware Supported: OverNumpad controller v1.Xb
Hardware Availability:
- controller
- keyboard

To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode.

Make example for this keyboard (after setting up your build environment):

make unicomp/spacesaver_m_pre_2013/overnumpad_1xb:default

Flashing example for this keyboard:

make unicomp/spacesaver_m_pre_2013/overnumpad_1xb:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.