qmk-keychron-q3-colemak-dh/keyboards/kbdfans/kbdpad/mk1
fauxpark 3047335729
Add support for configurable polling interval and power usage o… (#7336)
* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
2019-11-15 10:21:22 +11:00
..
keymaps/default [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
config.h Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
info.json Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
mk1.c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
mk1.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
readme.md Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
rules.mk Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
usbconfig.h Add support for configurable polling interval and power usage o… (#7336) 2019-11-15 10:21:22 +11:00

KBDPad MKI

Custom numpad.

Keyboard Maintainer: MechMerlin
Hardware Supported: KBDPad MKI
Hardware Availability: KBDfans

Make example for this keyboard (after setting up your build environment):

make kbdfans/kbdpad/mk1:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as 0 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.