History

Ryan a988f8a169 Remove unused `GRAVE_ESC_CTRL_OVERRIDE` from config.h (#19752 )		2023-02-06 02:40:23 +00:00
..
m80h	Refactor some layouts which contain keyboard name (#19643 )	2023-01-20 02:36:30 +00:00
m80s	Move keyboard USB IDs and strings to data driven, pass 2: M-O (#18090 )	2022-08-20 01:45:28 +01:00
chconf.h
config.h	Remove unused `GRAVE_ESC_CTRL_OVERRIDE` from config.h (#19752 )	2023-02-06 02:40:23 +00:00
halconf.h
m80v1.c
m80v1.h
mcuconf.h
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00

Mode Eighty V1 PCB QMK firmware

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

Keyboard Maintainer: Gondolindrim
Hardware Supported: proprietary PCB using STM32F072 controller
Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website.

How to flash

The DFU state in the bootloader can be accessed in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v1/m80h:default # Hotswap
make mode/m80v1/m80s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v1/m80h:default:flash # Hotswap
make mode/m80v1/m80s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.