720c676403
On stm32f4 after reboot from DFU it was observed that the flash is already unlocked. In that case, attempting to unlock it again causes a data abort.
194 lines
6.1 KiB
C
194 lines
6.1 KiB
C
/*
|
|
* This software is experimental and a work in progress.
|
|
* Under no circumstances should these files be used in relation to any critical system(s).
|
|
* Use of these files is at your own risk.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
|
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
|
|
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
|
|
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
|
|
* https://github.com/leaflabs/libmaple
|
|
*
|
|
* Modifications for QMK and STM32F303 by Yiancar
|
|
*/
|
|
|
|
#if defined(EEPROM_EMU_STM32F303xC)
|
|
# define STM32F303xC
|
|
# include "stm32f3xx.h"
|
|
#elif defined(EEPROM_EMU_STM32F103xB)
|
|
# define STM32F103xB
|
|
# include "stm32f1xx.h"
|
|
#elif defined(EEPROM_EMU_STM32F072xB)
|
|
# define STM32F072xB
|
|
# include "stm32f0xx.h"
|
|
#elif defined(EEPROM_EMU_STM32F042x6)
|
|
# define STM32F042x6
|
|
# include "stm32f0xx.h"
|
|
#else
|
|
# error "not implemented."
|
|
#endif
|
|
|
|
#include "flash_stm32.h"
|
|
|
|
#if defined(EEPROM_EMU_STM32F103xB)
|
|
# define FLASH_SR_WRPERR FLASH_SR_WRPRTERR
|
|
#endif
|
|
|
|
/* Delay definition */
|
|
#define EraseTimeout ((uint32_t)0x00000FFF)
|
|
#define ProgramTimeout ((uint32_t)0x0000001F)
|
|
|
|
#define ASSERT(exp) (void)((0))
|
|
|
|
/**
|
|
* @brief Inserts a time delay.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void delay(void) {
|
|
__IO uint32_t i = 0;
|
|
for (i = 0xFF; i != 0; i--) {
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the FLASH Status.
|
|
* @param None
|
|
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
|
* FLASH_ERROR_WRP or FLASH_COMPLETE
|
|
*/
|
|
FLASH_Status FLASH_GetStatus(void) {
|
|
if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY) return FLASH_BUSY;
|
|
|
|
if ((FLASH->SR & FLASH_SR_PGERR) != 0) return FLASH_ERROR_PG;
|
|
|
|
if ((FLASH->SR & FLASH_SR_WRPERR) != 0) return FLASH_ERROR_WRP;
|
|
|
|
if ((FLASH->SR & FLASH_OBR_OPTERR) != 0) return FLASH_ERROR_OPT;
|
|
|
|
return FLASH_COMPLETE;
|
|
}
|
|
|
|
/**
|
|
* @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
|
|
* @param Timeout: FLASH progamming Timeout
|
|
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
|
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
|
*/
|
|
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) {
|
|
FLASH_Status status;
|
|
|
|
/* Check for the Flash Status */
|
|
status = FLASH_GetStatus();
|
|
/* Wait for a Flash operation to complete or a TIMEOUT to occur */
|
|
while ((status == FLASH_BUSY) && (Timeout != 0x00)) {
|
|
delay();
|
|
status = FLASH_GetStatus();
|
|
Timeout--;
|
|
}
|
|
if (Timeout == 0) status = FLASH_TIMEOUT;
|
|
/* Return the operation status */
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Erases a specified FLASH page.
|
|
* @param Page_Address: The page address to be erased.
|
|
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
|
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
|
*/
|
|
FLASH_Status FLASH_ErasePage(uint32_t Page_Address) {
|
|
FLASH_Status status = FLASH_COMPLETE;
|
|
/* Check the parameters */
|
|
ASSERT(IS_FLASH_ADDRESS(Page_Address));
|
|
/* Wait for last operation to be completed */
|
|
status = FLASH_WaitForLastOperation(EraseTimeout);
|
|
|
|
if (status == FLASH_COMPLETE) {
|
|
/* if the previous operation is completed, proceed to erase the page */
|
|
FLASH->CR |= FLASH_CR_PER;
|
|
FLASH->AR = Page_Address;
|
|
FLASH->CR |= FLASH_CR_STRT;
|
|
|
|
/* Wait for last operation to be completed */
|
|
status = FLASH_WaitForLastOperation(EraseTimeout);
|
|
if (status != FLASH_TIMEOUT) {
|
|
/* if the erase operation is completed, disable the PER Bit */
|
|
FLASH->CR &= ~FLASH_CR_PER;
|
|
}
|
|
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR);
|
|
}
|
|
/* Return the Erase Status */
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Programs a half word at a specified address.
|
|
* @param Address: specifies the address to be programmed.
|
|
* @param Data: specifies the data to be programmed.
|
|
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
|
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
|
*/
|
|
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) {
|
|
FLASH_Status status = FLASH_BAD_ADDRESS;
|
|
|
|
if (IS_FLASH_ADDRESS(Address)) {
|
|
/* Wait for last operation to be completed */
|
|
status = FLASH_WaitForLastOperation(ProgramTimeout);
|
|
if (status == FLASH_COMPLETE) {
|
|
/* if the previous operation is completed, proceed to program the new data */
|
|
FLASH->CR |= FLASH_CR_PG;
|
|
*(__IO uint16_t*)Address = Data;
|
|
/* Wait for last operation to be completed */
|
|
status = FLASH_WaitForLastOperation(ProgramTimeout);
|
|
if (status != FLASH_TIMEOUT) {
|
|
/* if the program operation is completed, disable the PG Bit */
|
|
FLASH->CR &= ~FLASH_CR_PG;
|
|
}
|
|
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR);
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unlocks the FLASH Program Erase Controller.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void FLASH_Unlock(void) {
|
|
if (FLASH->CR & FLASH_CR_LOCK) {
|
|
/* Authorize the FPEC Access */
|
|
FLASH->KEYR = FLASH_KEY1;
|
|
FLASH->KEYR = FLASH_KEY2;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Locks the FLASH Program Erase Controller.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void FLASH_Lock(void) {
|
|
/* Set the Lock Bit to lock the FPEC and the FCR */
|
|
FLASH->CR |= FLASH_CR_LOCK;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears the FLASH's pending flags.
|
|
* @param FLASH_FLAG: specifies the FLASH flags to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_FLAG_PGERR: FLASH Programming error flag flag
|
|
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
|
* @arg FLASH_FLAG_EOP: FLASH End of Programming flag
|
|
* @retval None
|
|
*/
|
|
void FLASH_ClearFlag(uint32_t FLASH_FLAG) {
|
|
/* Clear the flags */
|
|
FLASH->SR = FLASH_FLAG;
|
|
}
|