History

Ryan 2da0827d4f Remove matrix size defines (#19581 )		2023-02-17 16:08:25 +11:00
..
keymaps	RESET -> QK_BOOT user keymaps (#17940 )	2022-08-21 23:55:30 +01:00
config.h	Remove matrix size defines (#19581 )	2023-02-17 16:08:25 +11:00
info.json	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
lefishe.c	[Keyboard] move lyso1 's boards into lyso1/ (#15767 )	2022-01-10 15:06:37 -08:00
lefishe.h	[Keyboard] move lyso1 's boards into lyso1/ (#15767 )	2022-01-10 15:06:37 -08:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

lefishe

firmware for the 65xt keyboard designed around the symmetrical blocker 65% layout. This pcb cab also be used as a replacement pcb for the revoKmini/kmacmini with some modification to the design

Keyboard Maintainer: Lyso1
Hardware Supported: LeFishe, atmega32u4
Hardware Availability: /u/TheLysol_27

Make example for this keyboard (after setting up your build environment):

make lyso1/lefishe:default

Enter into the bootloader to flash new firmware in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix(The F1 key in this case) and plug the the keyboard in. 
* **Physical reset button**: Briefly press the button on the back and left side of the PCB(exactly under where the "2" key would be located) while the PCB is plugged in.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` (RALT + E in this case) while the keyboard is plugged in.

Flashing example for this keyboard:

make lyso1/lefishe:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.