1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
79 lines
3.9 KiB
C
79 lines
3.9 KiB
C
// Copyright 2021 Paul Cotter (@gr1mr3aver)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter GC9A01 command opcodes
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Level 1 command opcodes
|
|
|
|
#define GC9A01_GET_ID_INFO 0x04 // Get ID information
|
|
#define GC9A01_GET_STATUS 0x09 // Get status
|
|
#define GC9A01_CMD_SLEEP_ON 0x10 // Enter sleep mode
|
|
#define GC9A01_CMD_SLEEP_OFF 0x11 // Exit sleep mode
|
|
#define GC9A01_CMD_PARTIAL_ON 0x12 // Enter partial mode
|
|
#define GC9A01_CMD_PARTIAL_OFF 0x13 // Exit partial mode
|
|
#define GC9A01_CMD_INVERT_ON 0x20 // Enter inverted mode
|
|
#define GC9A01_CMD_INVERT_OFF 0x21 // Exit inverted mode
|
|
#define GC9A01_CMD_DISPLAY_OFF 0x28 // Disable display
|
|
#define GC9A01_CMD_DISPLAY_ON 0x29 // Enable display
|
|
#define GC9A01_SET_COL_ADDR 0x2A // Set column address
|
|
#define GC9A01_SET_PAGE_ADDR 0x2B // Set page address
|
|
#define GC9A01_SET_MEM 0x2C // Set memory
|
|
#define GC9A01_SET_PARTIAL_AREA 0x30 // Set partial area
|
|
#define GC9A01_SET_VSCROLL 0x33 // Set vertical scroll def
|
|
#define GC9A01_CMD_TEARING_ON 0x34 // Tearing line enabled
|
|
#define GC9A01_CMD_TEARING_OFF 0x35 // Tearing line disabled
|
|
#define GC9A01_SET_MEM_ACS_CTL 0x36 // Set mem access ctl
|
|
#define GC9A01_SET_VSCROLL_ADDR 0x37 // Set vscroll start addr
|
|
#define GC9A01_CMD_IDLE_OFF 0x38 // Exit idle mode
|
|
#define GC9A01_CMD_IDLE_ON 0x39 // Enter idle mode
|
|
#define GC9A01_SET_PIX_FMT 0x3A // Set pixel format
|
|
#define GC9A01_SET_MEM_CONT 0x3C // Set memory continue
|
|
#define GC9A01_SET_TEAR_SCANLINE 0x44 // Set tearing scanline
|
|
#define GC9A01_GET_TEAR_SCANLINE 0x45 // Get tearing scanline
|
|
#define GC9A01_SET_BRIGHTNESS 0x51 // Set brightness
|
|
#define GC9A01_SET_DISPLAY_CTL 0x53 // Set display ctl
|
|
#define GC9A01_GET_ID1 0xDA // Get ID1
|
|
#define GC9A01_GET_ID2 0xDB // Get ID2
|
|
#define GC9A01_GET_ID3 0xDC // Get ID3
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Level 2 command opcodes
|
|
|
|
#define GC9A01_SET_RGB_IF_SIG_CTL 0xB0 // RGB IF signal ctl
|
|
#define GC9A01_SET_BLANKING_PORCH_CTL 0xB5 // Set blanking porch ctl
|
|
#define GC9A01_SET_FUNCTION_CTL 0xB6 // Set function ctl
|
|
#define GC9A01_SET_TEARING_EFFECT 0xBA // Set backlight ctl 3
|
|
#define GC9A01_SET_IF_CTL 0xF6 // Set interface control
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Level 3 command opcodes
|
|
|
|
#define GC9A01_SET_FRAME_RATE 0xE8 // Set frame rate
|
|
#define GC9A01_SET_SPI_2DATA 0xE9 // Set frame rate
|
|
#define GC9A01_SET_POWER_CTL_1 0xC1 // Set power ctl 1
|
|
#define GC9A01_SET_POWER_CTL_2 0xC3 // Set power ctl 2
|
|
#define GC9A01_SET_POWER_CTL_3 0xC4 // Set power ctl 3
|
|
#define GC9A01_SET_POWER_CTL_4 0xC9 // Set power ctl 4
|
|
#define GC9A01_SET_POWER_CTL_7 0xA7 // Set power ctl 7
|
|
#define GC9A01_SET_INTER_REG_ENABLE1 0xFE // Enable Inter Register 1
|
|
#define GC9A01_SET_INTER_REG_ENABLE2 0xEF // Enable Inter Register 2
|
|
#define GC9A01_SET_GAMMA1 0xF0 //
|
|
#define GC9A01_SET_GAMMA2 0xF1
|
|
#define GC9A01_SET_GAMMA3 0xF2
|
|
#define GC9A01_SET_GAMMA4 0xF3
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// MADCTL Flags
|
|
#define GC9A01_MADCTL_MY 0b10000000
|
|
#define GC9A01_MADCTL_MX 0b01000000
|
|
#define GC9A01_MADCTL_MV 0b00100000
|
|
#define GC9A01_MADCTL_ML 0b00010000
|
|
#define GC9A01_MADCTL_RGB 0b00000000
|
|
#define GC9A01_MADCTL_BGR 0b00001000
|
|
#define GC9A01_MADCTL_MH 0b00000100
|