196 lines
7.4 KiB
C
196 lines
7.4 KiB
C
#include "quantum.h"
|
|
#include "backlight.h"
|
|
#include <hal.h>
|
|
#include "debug.h"
|
|
|
|
// TODO: remove short term bodge when refactoring BACKLIGHT_CUSTOM_DRIVER out
|
|
#ifdef BACKLIGHT_PIN
|
|
|
|
# if defined(STM32F0XX) || defined(STM32F0xx)
|
|
# error "Backlight support for STMF072 is not available. Please disable."
|
|
# endif
|
|
|
|
// GPIOV2 && GPIOV3
|
|
# ifndef BACKLIGHT_PAL_MODE
|
|
# define BACKLIGHT_PAL_MODE 2
|
|
# endif
|
|
|
|
// GENERIC
|
|
# ifndef BACKLIGHT_PWM_DRIVER
|
|
# define BACKLIGHT_PWM_DRIVER PWMD4
|
|
# endif
|
|
# ifndef BACKLIGHT_PWM_CHANNEL
|
|
# define BACKLIGHT_PWM_CHANNEL 3
|
|
# endif
|
|
|
|
static void breathing_callback(PWMDriver *pwmp);
|
|
|
|
static PWMConfig pwmCFG = {0xFFFF, /* PWM clock frequency */
|
|
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
|
|
NULL, /* No Callback */
|
|
{ /* Default all channels to disabled - Channels will be configured durring init */
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL}},
|
|
0, /* HW dependent part.*/
|
|
0};
|
|
|
|
static PWMConfig pwmCFG_breathing = {0xFFFF, /** PWM clock frequency */
|
|
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
|
|
breathing_callback, /* Breathing Callback */
|
|
{ /* Default all channels to disabled - Channels will be configured durring init */
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL},
|
|
{PWM_OUTPUT_DISABLED, NULL}},
|
|
0, /* HW dependent part.*/
|
|
0};
|
|
|
|
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
|
static uint16_t cie_lightness(uint16_t v) {
|
|
if (v <= 5243) // if below 8% of max
|
|
return v / 9; // same as dividing by 900%
|
|
else {
|
|
uint32_t y = (((uint32_t)v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
|
|
// to get a useful result with integer division, we shift left in the expression above
|
|
// and revert what we've done again after squaring.
|
|
y = y * y * y >> 8;
|
|
if (y > 0xFFFFUL) // prevent overflow
|
|
return 0xFFFFU;
|
|
else
|
|
return (uint16_t)y;
|
|
}
|
|
}
|
|
|
|
void backlight_init_ports(void) {
|
|
// printf("backlight_init_ports()\n");
|
|
|
|
# ifdef USE_GPIOV1
|
|
palSetPadMode(PAL_PORT(BACKLIGHT_PIN), PAL_PAD(BACKLIGHT_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
|
|
# else
|
|
palSetPadMode(PAL_PORT(BACKLIGHT_PIN), PAL_PAD(BACKLIGHT_PIN), PAL_MODE_ALTERNATE(BACKLIGHT_PAL_MODE));
|
|
# endif
|
|
|
|
pwmCFG.channels[BACKLIGHT_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH;
|
|
pwmCFG_breathing.channels[BACKLIGHT_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH;
|
|
pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG);
|
|
|
|
backlight_set(get_backlight_level());
|
|
if (is_backlight_breathing()) {
|
|
breathing_enable();
|
|
}
|
|
}
|
|
|
|
void backlight_set(uint8_t level) {
|
|
// printf("backlight_set(%d)\n", level);
|
|
if (level == 0) {
|
|
// Turn backlight off
|
|
pwmDisableChannel(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1);
|
|
} else {
|
|
// Turn backlight on
|
|
if (!is_breathing()) {
|
|
uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t)level / BACKLIGHT_LEVELS));
|
|
// printf("duty: (%d)\n", duty);
|
|
pwmEnableChannel(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, duty));
|
|
}
|
|
}
|
|
}
|
|
|
|
uint8_t backlight_tick = 0;
|
|
|
|
void backlight_task(void) {}
|
|
|
|
# define BREATHING_NO_HALT 0
|
|
# define BREATHING_HALT_OFF 1
|
|
# define BREATHING_HALT_ON 2
|
|
# define BREATHING_STEPS 128
|
|
|
|
static uint8_t breathing_halt = BREATHING_NO_HALT;
|
|
static uint16_t breathing_counter = 0;
|
|
|
|
bool is_breathing(void) { return BACKLIGHT_PWM_DRIVER.config == &pwmCFG_breathing; }
|
|
|
|
static inline void breathing_min(void) { breathing_counter = 0; }
|
|
|
|
static inline void breathing_max(void) { breathing_counter = get_breathing_period() * 256 / 2; }
|
|
|
|
void breathing_interrupt_enable(void) {
|
|
pwmStop(&BACKLIGHT_PWM_DRIVER);
|
|
pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG_breathing);
|
|
chSysLockFromISR();
|
|
pwmEnablePeriodicNotification(&BACKLIGHT_PWM_DRIVER);
|
|
pwmEnableChannelI(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, 0xFFFF));
|
|
chSysUnlockFromISR();
|
|
}
|
|
|
|
void breathing_interrupt_disable(void) {
|
|
pwmStop(&BACKLIGHT_PWM_DRIVER);
|
|
pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG);
|
|
}
|
|
|
|
void breathing_enable(void) {
|
|
breathing_counter = 0;
|
|
breathing_halt = BREATHING_NO_HALT;
|
|
breathing_interrupt_enable();
|
|
}
|
|
|
|
void breathing_pulse(void) {
|
|
if (get_backlight_level() == 0)
|
|
breathing_min();
|
|
else
|
|
breathing_max();
|
|
breathing_halt = BREATHING_HALT_ON;
|
|
breathing_interrupt_enable();
|
|
}
|
|
|
|
void breathing_disable(void) {
|
|
// printf("breathing_disable()\n");
|
|
breathing_interrupt_disable();
|
|
// Restore backlight level
|
|
backlight_set(get_backlight_level());
|
|
}
|
|
|
|
void breathing_self_disable(void) {
|
|
if (get_backlight_level() == 0)
|
|
breathing_halt = BREATHING_HALT_OFF;
|
|
else
|
|
breathing_halt = BREATHING_HALT_ON;
|
|
}
|
|
|
|
void breathing_toggle(void) {
|
|
if (is_breathing())
|
|
breathing_disable();
|
|
else
|
|
breathing_enable();
|
|
}
|
|
|
|
/* To generate breathing curve in python:
|
|
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
|
|
*/
|
|
static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
// Use this before the cie_lightness function.
|
|
static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); }
|
|
|
|
static void breathing_callback(PWMDriver *pwmp) {
|
|
(void)pwmp;
|
|
uint8_t breathing_period = get_breathing_period();
|
|
uint16_t interval = (uint16_t)breathing_period * 256 / BREATHING_STEPS;
|
|
// resetting after one period to prevent ugly reset at overflow.
|
|
breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
|
|
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
|
|
|
|
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) {
|
|
breathing_interrupt_disable();
|
|
}
|
|
|
|
uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
|
|
|
|
chSysLockFromISR();
|
|
pwmEnableChannelI(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, duty));
|
|
chSysUnlockFromISR();
|
|
}
|
|
|
|
#endif
|