5dc91ddc60
* Avoid NO_USB_STARTUP_CHECK - Disable USB as checks seem to enable it somehow * Update quantum/split_common/split_util.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Also remove NO_USB_STARTUP_CHECK from vitamins_included/rev1 |
||
|---|---|---|
| .. | ||
| keymaps | ||
| rev1 | ||
| rev2 | ||
| config.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
| vitamins_included.c | ||
| vitamins_included.h | ||
Let's Split Vitamins Included
This readme and most of the code are from the lets split readme
Quick links
Hardware
Hardware files for the Let's Split vitamins included are stored here
Features
Some features supported by the firmware:
- Either half can connect to the computer via USB, or both halves can be used independently.
- Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.
Required Hardware
| Amount | Description |
|---|---|
| 1 | PCB kit from novelkeys |
| 48 | MX compatible switches |
| 48 | 1U keycaps |
| 1 | Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables |
| 1 | TRS / TRRS cable |
Optional Hardware
A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.
WS2812 LEDs can be added to the board. Check the different revision readme for specifics.
Using I2C
On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.
You can change your configuration between serial and i2c by modifying your config.h file.