172 lines
5.7 KiB
C
Executable File
172 lines
5.7 KiB
C
Executable File
/*
|
|
Copyright 2020 Yiancar
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
|
|
/* LSE clock */
|
|
#define STM32_LSECLK 32768
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 4
|
|
#define MATRIX_COLS 3
|
|
|
|
#define MATRIX_ROW_PINS { A8, C15, A0, A1 }
|
|
#define MATRIX_COL_PINS { A9, C13, C14 }
|
|
// To enable debugger set A13 A14 -> A5 A7
|
|
|
|
/* COL2ROW, ROW2COL*/
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
|
|
/* Setting up 400KHz I2C Clock for a 48MHz system clock */
|
|
#define I2C1_SCL_PAL_MODE 1
|
|
#define I2C1_SDA_PAL_MODE 1
|
|
#define I2C1_TIMINGR_SCLDEL 3U
|
|
#define I2C1_TIMINGR_SDADEL 1U
|
|
#define I2C1_TIMINGR_SCLH 3U
|
|
#define I2C1_TIMINGR_SCLL 9U
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Magic Key Options
|
|
*
|
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
|
* the keyboard. They are best used in combination with the HID Listen program,
|
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
|
*
|
|
* The options below allow the magic key functionality to be changed. This is
|
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
|
*
|
|
*/
|
|
|
|
#define WS2812_SPI SPID2 // default: SPID1
|
|
#define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
|
|
#define WS2812_SPI_SCK_PAL_MODE 0
|
|
#define WS2812_SPI_SCK_PIN B13
|
|
|
|
#define RGB_DI_PIN B15
|
|
#ifdef RGB_DI_PIN
|
|
#define RGBLED_NUM 10 /* If number is smaller, buffer updates too fast causing glitches */
|
|
#define RGBLIGHT_HUE_STEP 8
|
|
#define RGBLIGHT_SAT_STEP 8
|
|
#define RGBLIGHT_VAL_STEP 8
|
|
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
|
#define RGBLIGHT_ANIMATIONS
|
|
#endif
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
#define BOOTMAGIC_LITE_ROW 0
|
|
#define BOOTMAGIC_LITE_COLUMN 0
|
|
|
|
/* Backlight options */
|
|
|
|
#define RGB_BACKLIGHT_ENABLED 1
|
|
|
|
#define RGB_BACKLIGHT_NEBULA12
|
|
|
|
// they aren't really used if RGB_BACKLIGHT_NEBULA65 defined
|
|
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
|
|
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
|
|
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
|
|
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
|
|
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
|
|
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
|
|
|
|
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
|
|
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
|
|
|
|
// disable backlight after timeout in minutes, 0 = no timeout
|
|
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
|
|
|
|
// the default brightness
|
|
#define RGB_BACKLIGHT_BRIGHTNESS 255
|
|
|
|
// the default effect (RGB test)
|
|
#define RGB_BACKLIGHT_EFFECT 6
|
|
|
|
// the default effect speed (0-3)
|
|
#define RGB_BACKLIGHT_EFFECT_SPEED 0
|
|
|
|
// the default color1 and color2
|
|
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
|
|
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
|
|
|
|
#define DRIVER_COUNT 1
|
|
#define DRIVER_LED_TOTAL 16
|
|
|
|
// These define which keys in the matrix are alphas/mods
|
|
// Used for backlight effects so colors are different for
|
|
// alphas vs. mods
|
|
// Each value is for a row, bit 0 is column 0
|
|
// Alpha=0 Mod=1
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000
|
|
|
|
#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
|
#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
|
#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
|
#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
|
|
|
// Backlight config starts after VIA's EEPROM usage,
|
|
// dynamic keymaps start after this.
|
|
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
|
|
|
|
// VIA lighting is handled by the keyboard-level code
|
|
#define VIA_CUSTOM_LIGHTING_ENABLE
|
|
#define VIA_QMK_RGBLIGHT_ENABLE
|