History

Ryan 9e64300e67 Move matrix config to info.json, part 4 (#20001 )		2023-03-11 00:00:24 +11:00
..
keymaps
config.h	Move matrix config to info.json, part 4 (#20001 )	2023-03-11 00:00:24 +11:00
info.json	Move matrix config to info.json, part 4 (#20001 )	2023-03-11 00:00:24 +11:00
pila87.c
pila87.h
readme.md
rules.mk

readme.md

Pila87 / XM87 Pro

A TKL keyboard made by 小淼外设 (Phage Studio), which controlled by an CKS32F103RBT6 (clone STM32F103RBT6) chipset. The keyboard features per-key RGB, 3 external RGB underglow ports.

Keyboard Maintainer: Phage Studio
Hardware Supported: CKS32F103RBT6 (clone STM32F103RBT6)
Hardware Availability: From 小淼外设 on Taobao

Make example for this keyboard (after setting up your build environment):

make phage_studio/pila87:default

Flashing example for this keyboard:

make phage_studio/pila87:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Warning

Before using this QMK firmware, you need these thing below:

1 Quartz Crystal (SMD 3225) 8 Mhz
2 Capacitor 0603 18pF (or 22pF)
1 ST-Link v2 to connect SWD and flash STM32duino (Maple 003). If you don't know how to flash, please read this guide: Click here

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (B key) and plug in the keyboard
Keycode in layout: Press the key mapped to RESET if it is available