History

4pplet 5878336f66 [Keyboard] Add Waffling60 revision e (#21664 ) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>		2023-10-26 23:42:11 -07:00
..
rev_a	Move single `LAYOUT`s to data driven (#20365 )	2023-04-12 13:42:51 +10:00
rev_b	Move RGBLight animations to data driven (#21635 )	2023-08-23 22:11:39 +01:00
rev_c	Move RGBLight animations to data driven (#21635 )	2023-08-23 22:11:39 +01:00
rev_d	[Keyboard] Add Waffling60 revision e (#21664 )	2023-10-26 23:42:11 -07:00
rev_d_ansi	Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 )	2023-06-23 20:31:25 +01:00
rev_d_iso	Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 )	2023-06-23 20:31:25 +01:00
rev_e	[Keyboard] Add Waffling60 revision e (#21664 )	2023-10-26 23:42:11 -07:00
rev_e_ansi	[Keyboard] Waffling60 Rev E ANSI Hotswap (#22270 )	2023-10-26 23:40:21 -07:00
readme.md	[Keyboard] Add Waffling60 revision e (#21664 )	2023-10-26 23:42:11 -07:00

readme.md

waffling60

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.

More info: https://geekhack.org/index.php?topic=103531.0

Keyboard Maintainer: 4pplet
Hardware Supported: waffling60

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_a:default
make 4pplet/waffling60/rev_b:default
make 4pplet/waffling60/rev_c:default
make 4pplet/waffling60/rev_d:default
make 4pplet/waffling60/rev_e:default
make 4pplet/waffling60/rev_d_ansi:default
make 4pplet/waffling60/rev_d_iso:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.

Alternative option if the firmware is already pre-flashed:

Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.