History

Joel Challis a0a6820c1b Migrate some dip switch config to info.json (#22437 )		2023-11-23 08:33:59 +11:00
..
boards/NUC123SD4AN0	[Keyboard] Add Support to Ducky One2 SF (#17260 )	2022-07-03 00:04:46 +10:00
chconf.h	[Keyboard] Add Support to Ducky One2 SF (#17260 )	2022-07-03 00:04:46 +10:00
config.h	Migrate some dip switch config to info.json (#22437 )	2023-11-23 08:33:59 +11:00
info.json	Migrate some dip switch config to info.json (#22437 )	2023-11-23 08:33:59 +11:00
matrix_diagram.md	Ducky One 2 SF 1967ST Layout Macro Additions (#20600 )	2023-04-27 22:45:26 -07:00
mcuconf.h	[Keyboard] Add Support to Ducky One2 SF (#17260 )	2022-07-03 00:04:46 +10:00
readme.md	Ducky One 2 SF 1967ST Layout Macro Additions (#20600 )	2023-04-27 22:45:26 -07:00
rules.mk	Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 )	2023-06-23 20:31:25 +01:00

One 2 SF (DKON1967ST)

A 65% keyboard by Ducky.

This firmware was tested on the Ducky One 2 SF 1967ST version.

Keyboard Maintainer: f7urry
Hardware Supported: Ducky One 2 SF RGB (DKON1967ST), NUC123SD4AN0 + MBI5043GP
- Only ANSI layout is supported at this time
- ISO compiles but is untested
- VIA still WIP.
- RGB LEDs are currently disabled until the driver is merged.

Compiling the Firmware:

make ducky/one2sf/1967st:default

To enter the 1967ST bootloader to flash, boot the keyboard while holding D+L.

There are then two ways to flash the keyboard:

pip install --user nuvoton-isp
nuvoisp -f ducky_one2sf_ansi.bin

Alternatively you can use elfmimi's nu-isp-cli which is more complete than nuvoisp and allows flashing .hex files as well.

cargo install nu-isp-cli
nu-isp-cli flash ducky_one2sf_ansi.bin

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.